Download
Share
Print this page
  1. Manuals
  2. Brands
  3. netsys Manuals
  4. Extender
  5. NV-700L
  6. User manual

netsys NV-700L User Manual

Managed single master lan extender
Hide thumbs Also See for NV-700L:

Advertisement

Quick Links

Download this manual
M M
a a
n n
a a
g g
e e
d d
S S
i i
n n
M
a
n
a
g
e
d
S
i
n
U U
S S
E E
R R
U
S
E
N N
V V
- -
7 7
0 0
0 0
L L
N
V
-
7
0
0
L
g g
l l
e e
M M
a a
s s
t t
e e
r r
L L
A A
g
l
e
M
a
s
t
e
r
L
A
' '
S S
M M
A A
N N
U U
R
'
S
M
A
N
U
N N
E E
x x
t t
e e
n n
d d
e e
r r
N
E
x
t
e
n
d
e
r
A A
L L
A
L

Advertisement

loading
Need help?

Need help?

Do you have a question about the NV-700L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for netsys NV-700L

Summary of Contents for netsys NV-700L

  • Page 1 ’ ’ ’...

  • Page 2: Copyright

    In the interest of improving internal design, operational function, and/or reliability, NETSYS reserves the right to make changes to the products described in this document without notice. NETSYS does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

  • Page 3: Safety Warnings

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Safety Warnings For user safety, be sure to read and follow all warning notices and instructions before using the device.  DO NOT open the device or unit. Opening or removing the cover may expose user to dangerous high voltage points or other risks.
  • Page 4 Internet access and advanced voice services including VoIP, over a standard copper telephone cable. NV-700L is seen by many operators as an ideal accompaniment to a FTTP rollout, where for instance fiber optic is supplied direct to an apartment block and from there copper cable is used to supply residents with high-speed VDSL2.

  • Page 5: Table Of Contents

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Table of Contents COPYRIGHT..................................................1 1.1 C ..................................................7 HECK CHAPTER 2. INSTALLING THE MODEM ........................................8 2.1 H ............................................. 8 ARDWARE NSTALLATION 2.2 P ..........................................8 INSTALLATION EQUIREMENTS 2.3 G...
  • Page 6 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.3 Update Software ............................................. 25 4.3.4 Account Management ........................................... 26 4.3.5 Log Level ................................................27 4.3.6 Service Control ............................................... 28 4.3.7 CWNP (TR-069 Settings) ..........................................30 4.3.8 Internet Time ..............................................31 4.3.9 Restore Default ...............................................
  • Page 7 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8.1 Telnet Service Setup (for Security) ......................................51 4.8.2 SSH Service (Telnet Encryption) ........................................ 52 4.8.3 Printer Sharing ..............................................53 4.8.4 Multimedia Sharing ............................................54 4.8.5 UPnP .................................................. 55 4.8.6 Multicast IGMP ..............................................

  • Page 8: Unpacking Information

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Chapter 1. Unpacking Information 1.1 Check List Thank users for choosing Netsys NV-700L. Before installing the router, please verify the contents inside the package. Package Contents: 1 x VDSL2 CO Modem 1 x QR code for user’s...

  • Page 9: Chapter 2. Installing The Modem

    2.1 Hardware Installation This chapter describes how to install the modem and set up the network connections. The NV-700L may be installed on any level surface (e.g. a table or shelf). However, please take note of the following minimum site requirements before user begin.

  • Page 10: General Rules

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 2.3 General Rules Before making any connections to the modem, please note the following rules:  Ethernet Port interface: RJ-45 All network connections to the modem Ethernet port must be made using Category 5 UTP/STP or above for 100 Mbps, Category 3, 4 UTP for 10Mbps.

  • Page 11: Rj-45 Ports

    Unused 2.4 Connecting the RJ-11 / RJ-45 Ports  The Line port has 1 connector: RJ-11. It is used to connect with NV-700L Master side over a single pair phone wire to NV-600A Slave side (point to point application). (Figure 2.1)

  • Page 12: Point To Point Application

    Master / Slave device 2.5 Point to Point Application First a quick overview of a complete setup of interconnection of NV-700L and NV-600A. NV-700L is a LAN extender that uses the extraordinary bandwidth promise of VDSL2 technology (max. 100Mbps Symmetric) (Figure 2.2)
  • Page 13  2.5.1 Connect the NV-700L(Master) and the NV-600A(Slave) to the Line The goal for LAN extender is to pass high speed data over a twisted pair cable. In the setup, connect NV-700L(Master) to NV-600A (Slave) through phone wire (24~26 AWG) or line simulator or any other hardware representation of a cable network, with or without noise injection and crosstalk simulations.

  • Page 14: Chapter 3. Hardware Description

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Chapter 3. Hardware Description This section describes the important parts of the NV-700L. It features the front panel and rear panel.

  • Page 15: Front Panel

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 NV-700L Outward 3.1 Front Panel The figure shows the front panel. (Figure 3.1) Figure 3.1 Front Panel (NV-700L) 3.2 Front Indicators The Modem has Seven LED indicators. The following Table shows the description.
  • Page 16 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Color Status Descriptions On (Steady) The device has a good Ethernet connection. E1 ~ E4 Green Blinking The device is sending or receiving data. (Ethernet LED) The LAN is not connected or has malfunctioned.

  • Page 17: Rear Panel

    3-2) Table 3-2 Description of the modem rear connectors Type Connector Description The reset buttons allow users to reboot the LAN NV-700L or load the default settings. Reset Tact Switch Button Press and hold for 1-5 seconds: Reboot the NV-700L Press over 5 seconds: Load the default settings External switching Power Adapter: Input: AC 85~240Volts/50~60Hz.
  • Page 18 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Line RJ-11 For connecting to a Master/Slave device. Type Connector Description phone RJ-11 For connecting to the POTS equipment or ISDN. Ethernet RJ-45 For connecting to an Ethernet equipped device.

  • Page 19: Chapter 4. Configure The Nv-700L Via Web Management Menu

    Chapter 4. Configure the NV-700L via Web management menu The NV-700L provides a built-in HTML based management interface that allows configuration of the NV-700L via Internet Browser. Best viewed using Chrome or Firefox browsers. In order to use the web browser to configure the device, the user may need to allow: ...

  • Page 20: Basic Setup

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.1 BASIC Setup 4.1.1 Login Webpage The default username and password are “admin”. Figure 4.1.1 Login Webpage...

  • Page 21: Display Status

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.1.2 Display status When the device is running, the status page will display the device information (Hardware/Software Version, MAC Address, and System Up Time), as shown in Figure 4.1.2.

  • Page 22: Select The Menu Level

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.2 Select the Menu Level There is an easy Setup for end users at the setup of NV-700L with System, Status, xDSL, LAN, Qos, Applications, USB, Home, Logout for more detail configurations...

  • Page 23: System

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3 System Select “System”. The menu below will be used frequently. It includes the sub-menus of Configuration Backup、 Configuration Restore、 Update Software、 Account Managemant、 Log level 、 Logs、...

  • Page 24: Configuration Backup

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.1 Configuration Backup To backup the configuration setting value, click on the “Configuration Backup” link in the left navigation bar. A screen is displayed as shown in Figure 4.3.1.

  • Page 25: Configuration Restore

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.2 Configuration Restore To restore user’s configuration setting value, click on the “Configuration Restore” link in the left navigation bar. A screen is displayed as shown in Figure 4.3.2.

  • Page 26: Update Software

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.3 Update Software To update software, click on the “Update Software” link in the left navigation bar and follow the steps for updating. A screen is displayed as shown in Figure 4.3.3.

  • Page 27: Account Management

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.4 Account Management To change or create passwords, click on the “Account Management” link in the left navigation bar. A screen is displayed as shown in Figure 4.3.4.

  • Page 28: Log Level

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.5 Log Level Click on the “Log level” link in the left navigation bar, on the right page user will see how to enable Log or Log Server.

  • Page 29: Service Control

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.6 Service Control Click on “Service Control” link in the left navigation bar, on the right page user will see how to enable ACL. Click “add” to config Protocol / IP Protocol Type / Enable / Action and basic information. A screen is displayed as shown in...
  • Page 30 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Figure 4.3.6 Service Control – IP Address Configuration...

  • Page 31: Cwnp (Tr-069 Settings)

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.7 CWNP (TR-069 Settings) Click on “CWMP” link in the left navigation bar to create TR-069 connection, and setup ACS URL/ ACS Username/ACS Password and basic information. A screen is displayed as shown in Figure 4.3.7.

  • Page 32: Internet Time

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.8 Internet Time If SNTP server could not be connected to allow the device to synchronize the system clock to the global Internet. Please setup “Internet Time”. A screen is displayed as shown in Figure 4.3.8.

  • Page 33: Restore Default

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.3.9 Restore Default Setting to the factory defaults, click on the “Restore Default” link in the left navigation bar, and press “Restore Default Settings”, the device will reboot in 10 seconds. A screen is displayed as shown in Figure 4.3.9.

  • Page 34: Status Setup

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.4 Status Setup Select “Status”. It includes the sub-menus of Device Infomation、LAN Network、Ethernet、WAN Statistics、LAN Statistics、 ARP. A screen is displayed as shown in Figure 4.4 Figure 4.4 Device information...

  • Page 35: Lan Network

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.4.1 LAN Network Click on the “LAN Network” link in the left navigation bar, user will see the status of IPv4/IPv6 Address for this device. A screen is displayed as shown in Figure 4.4.1.

  • Page 36: Ethernet

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.4.2 Ethernet Click on the “Ethernet” link in the left navigation bar, user will see the Ethernet Status, Speed, and Duplex of LAN1, LAN2, LAN3, LAN4 for this device. A screen is displayed as shown in Figure 4.4.2.

  • Page 37: Wan(Line) Statistics

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.4.3 WAN(Line) Statistics Click on the “WAN Statistics” link in the left navigation bar, user will see the Received and Transmitted status for this device. A screen is displayed as shown in Figure 4.4.3.

  • Page 38: Lan Statistics

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.4.4 LAN Statistics Click on the “LAN Statistics” link in the left navigation bar, user will see the Received and Transmitted status for LAN1~4. A screen is displayed as shown in Figure 4.4.4.

  • Page 39: Arp

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.4.5 ARP Click on the “ARP” link in the left navigation bar, user will see the records of Flags, HW Address, and Device status for different IP addresses. A screen is displayed as shown in Figure 4.4.5.

  • Page 40: Xdsl Setup

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.5 xDSL Setup Select “xDSL”. It includes the sub-menus of Dsl Status、Dsl Config. Click on the “Dsl Status” link in the left navigation bar, user will see VDSL Information for this device. A screen is displayed as shown in Figure 4.5.

  • Page 41: Mode & Profile Config

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.5.1 Mode & profile Config Click on the “Dsl Config” link in the left navigation bar, there are 9 VDSL modes selectable, the default setting is “3. Master Mode, Sy-Auto 1_8/2 (SNRM 6/6 )”.

  • Page 42: Vdsl Config Overview

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.5.1.1 VDSL Config Overview Below table clarify the settings of 9 different VDSL modes. Config. Note Symmetric Auto, Max. Interleave=8, Min.Inp=2, Sy-Auto I_8/2 (SNRM 8/8) SNRM=8 non symmetric Auto, Max. Interleave=8, Min.Inp=2,...

  • Page 43: Lan Setup

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Web config for Slave mode is available. Slave Mode Note：This device is available to select Master (Config 1~8) / Slave (Config 9) mode through web config. 4.6 LAN Setup Select “LAN”.

  • Page 44: Ipv4 Configuration

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.6.1 IPv4 Configuration Click on the “IPv4 Configuration” link in the left navigation bar. Click “Apply” at any time during configuration to save the information that user has entered. A screen is displayed as shown in Figure 4.6.1...

  • Page 45: Ipv6 Configuration

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.6.2 IPv6 Configuration: Click on the “IPv6 Configuration” link in the left navigation bar. Click “Apply” at any time during configuration to save the information that user has entered. A screen is displayed as shown in Figure 4.6.2...

  • Page 46: Ipv6Static Route

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.6.3 IPv6Static Route Click on the “IPv6Static Route” link in the left navigation bar. Click “add” to a new page and setup Static Route. A screen is displayed as shown in...
  • Page 47 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Figure 4.6.3 IPv6Static Route...

  • Page 48: Ethernet Mode

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.6.4 Ethernet Mode Click on the “Ethernet Mode” link in the left navigation bar. Choose the speed (Auto, 10Mb/s, 100Mb/s) of LAN1~4, and click “Apply” to setup. Figure 4.6.4 LAN-Ethernet Mode Configuration...

  • Page 49: Qos Setup

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.7 Qos Setup Select “Qos”. It includes the sub-menus of Qos Queue、Qos Classification. A screen is displayed as shown in Figure 4.7. Figure 4.7 Qos...

  • Page 50: Qos Queue

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.7.1 Qos Queue Click on “Qos Queue” link in the left navigation bar, on the right page user will see how to enable Qos, and Upstream Queue Settings. There are four models of Qos profiles.

  • Page 51: Applications

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8 Applications Select “Applications”. It includes the sub-menus of Telnet Service、SSH Service、Printer Share、Multimedia Share、UPnP、 Multicast IGMP、Multicast MLD、SNMP. A screen is displayed as shown in Figure 4.8. Figure 4.8 Applications...

  • Page 52: Telnet Service Setup (For Security)

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8.1 Telnet Service Setup (for Security) Click on “Telnet Service” link in the left navigation bar, on the right page user will see how to enable Telnet Service. A screen is displayed as shown in Figure 4.8.1...

  • Page 53: Ssh Service (Telnet Encryption)

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8.2 SSH Service (Telnet Encryption) Click on “SSH Service” link in the left navigation bar, on the right page user will see how to enable SSH Service. A screen is displayed as shown in Figure 4.8.2...

  • Page 54: Printer Sharing

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8.3 Printer Sharing Click on “Printer Share” link in the left navigation bar, on the right page user will see how to enable Printer Service, and type Queue Name. A screen is displayed as shown in Figure 4.8.3.

  • Page 55: Multimedia Sharing

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8.4 Multimedia Sharing Click on “Multimedia Share” link in the left navigation bar, on the right page user will see how to enable DMS and select Share Folders. A screen is displayed as shown in Figure 4.8.4.

  • Page 56: Upnp

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8.5 UPnP Click on “UPnP” link in the left navigation bar, on the right page user will see how to enable UPnP and add Blacklist. A screen is displayed as shown in Figure 4.8.5.

  • Page 57: Multicast Igmp

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8.6 Multicast IGMP Click on “Multicast IGMP” link in the left navigation bar. According to the setting, if user wants to test the IGMP function, user only needs to enable IGMP function basic on the Application setup.

  • Page 58: Multicast Mld (Ipv6)

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8.7 Multicast MLD (IPv6) Click on “Multicast MLD” link in the left navigation bar. According to the setting, if users want to test MLD function, users only need to enable MLD function to be basic on the Application setup.

  • Page 59: Snmp

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.8.8 SNMP Click on “SNMP” link in the left navigation bar, on the right page user will see how to enable SNMP function. NV-700L supports SNMP V1/V2. Figure 4.8.8 SNMP Settings...
  • Page 60 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Download “MG-SOFT MIB Browser”. Below picture indicate how to use the software and connect remote SNMP agent.
  • Page 61 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Select OID:1.3.6.1.2.1.1.3 SysUp Time...

  • Page 62: Usb Setup

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.9 USB setup Select “USB”. It includes the sub-menus of Storage Device Info、Samba Server、FTP Server、FTP Client、TFTP Server. A screen is displayed as shown in Figure 4.9. Figure 4.9 USB...

  • Page 63: Storage Device Info

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.9.1 Storage Device Info Insert a U disk into the USB interface, then login 192.168.16.249, click on “Storage Device Info” link in the left navigation bar. Confirm the system has mounted the U disk. A screen is displayed as shown in Figure 4.9.1...

  • Page 64: Samba Service

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.9.2 Samba Service Click on “Samba Service” link in the left navigation bar, on the right page user will see how to enable Samba Service. A screen is displayed as shown in Figure 4.9.2.

  • Page 65: Ftp Server

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.9.3 FTP Server Click on “FTP Server” link in the left navigation bar, on the right page user will see how to enable FTP Service function. A screen is displayed as shown in Figure 4.9.3.

  • Page 66: Ftp Client

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.9.4 FTP Client Click on “FTP Client” link in the left navigation bar, on the right page user can input FTP Client Settings, and click “Download”. A screen is displayed as shown in...
  • Page 67 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Figure 4.9.4 FTP Client Settings...
  • Page 68 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Click “Refresh”, and make sure the status is complete. Figure 4.9.4 FTP Client Settings...

  • Page 69: Tftp Server

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 4.9.5 TFTP Server Click on “TFTP Server” link in the left navigation bar, on the right page user will see how to enable TFTP Server function. A screen is displayed as shown in Figure 4.9.5.

  • Page 70: Appendix A: Cable Requirements

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Appendix A: Cable Requirements A.1 Ethernet Cable A CAT 3~7 UTP (unshielded twisted pair) cable is typically used to connect the Ethernet device to the Modem. A 10Base-T cable often consists of four pairs of wires, two of which are used for transmission.
  • Page 71 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Figure A-2 Pin Assignments and Wiring for an RJ-45 Straight-Through Cable Figure A-3 Pin Assignments and Wiring for an RJ-45 Crossover Cable...
  • Page 72 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 A.2 Telephone wire Standard telephone wire of any gauge or type-flat, twisted or quad is used to connect the Modem to the telephone network. A telephone cable typically consists of three pairs of wires, one of which is used for transmission. The connector at the end of the telephone cable is called an RJ-11 connector and it consists of six pins.

  • Page 73: Appendix B: Product Specification

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Appendix B: Product Specification Key Features & Benefits  Adopts ARM Cortex A9 dual-core processor  Supports Master/Slave Mode selectable by Web config menu  Supports G.998.4 G.INP ...
  • Page 74 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7  Supports bridge mode only  Supports Dual Firmware Image Backup  Supports SNMP v1/v2  On board POTS/ISDN splitter  Supports TR-069  Supports Jumbo frame (MTU) up to 2k bytes Note: 1.
  • Page 75 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Product Specification IEEE802.3/802.3u standards Standard: ITU-T G993.2/G998.4 standards Regulatory Compliance: RoHS Compliance 4 x RJ-45 10/100 Mbps Ethernet port 1 x RJ-11 / Terminal combo for line port...
  • Page 76 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 0°C ~ 50°C (32°F ~ 122°F) Operating Temperature: Fanless, free air cooling Storage Temperature: -20°C ~ 70°C (-4°F ~158°F) Humidity: 10% to 90% (non-condensing) Dimensions: 184 x 146 x 40 mm (7.2" x 5.74" x 1.57”)

  • Page 77: Appendix C: Troubleshooting

    Solution: 2.4 Check the modem on the attached device and cable connections for possible defects. 2.5 Make sure that the phone wire must be connecting NV-700L first, when powered on. 2.6 Replace the defective modem or cable if necessary. 2.7 Or try to change band profile as 17a for getting long reach...
  • Page 78 Cause: NV-700L and NV-600A setting failure or phone cable length is over the specification limit. 3.1 Please make sure that the phone wire must be connected between NV-700L (Master side) NV-600A (Slave side) when both are power on. NV-700L Master side will do link speed function depending on phone wire length, therefore if NV-700L Master side can’t detect...
  • Page 79 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 The protocol was standardized in the International Telecommunication Union telecommunications sector (ITU-T) as Recommendation G.993.2. It was announced as finalized on 27 May 2005,[1] and first published on 17 February 2006. Several corrections and amendments were published in 2007 through 2011.
  • Page 80 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 I just bought an NV-700L to replace my Quest DSL modem for my home. I was told any VDSL2 modem would replace and give me higher communication speeds. It doesn’t get users on the internet 5.
  • Page 81 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 If user forgot user password, user must reset user modem. Unfortunately, this process will change all user settings back to the factory defaults. To reset the modem, locate the reset on the rear panel of Answer: the unit.

  • Page 82: System Diagnostics

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 System Diagnostics Power and Cooling Problems If the POWER indicator does not turn on when the power cord is plugged in, user may have a problem with the power outlet, power cord, or internal power supply as explained in the previous section.
  • Page 83 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Physical Configuration If problems occur after altering the network configuration, restore the original connections, and try to track the problem down by implementing the new changes, one step at a time. Ensure that cable distances and other physical aspects of the installation do not exceed recommendations.

  • Page 84: Appendix E: Compliance Information

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Appendix E: Compliance Information FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a computing device, pursuant to Part 15 of FCC rules.
  • Page 85 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 The telephone company may make changes to its facilities, equipment, operations or procedures that could affect the proper functioning of user equipment. If they do, the user will be notified in advance in order for user to make necessary modifications to maintain uninterrupted service.
  • Page 86 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 RoHS Mark Warning RoHS stands for Restriction of Hazardous Substances and impacts the entire electronics industry and many electrical products as well. The original RoHS, also known as Directive 2002/95/EC, originated in the European Union in 2002 and restricts the use of six hazardous materials found in electrical and electronic products.
  • Page 87 NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 ErP Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA). If it is not needed during certain periods of time, it can be unplugged to save energy.

  • Page 88: Warranty

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Warranty The original product that the owner delivered in this package will be free from defects in material and workmanship for one-year parts after purchase. There will be a minimal charge to replace consumable components, such as fuses, power transformers, and mechanical cooling devices.

  • Page 89: Chinese Sj/T 11364-2024

    NV-700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.7 Chinese SJ/T 11364-2024 有 毒 有 害 物 质 或 元 素 邻苯二甲 邻苯二甲 邻苯二甲 酸二(2- 邻苯二甲 部件名称 酸丁酯苯 酸二異丁 六 价 铬 多 溴 联 苯 多 溴 二 苯...