ASROCK ALTRAD8UD-1L Quick Installation Manual

*15G065291001AR*
P/N: 15G065291001AR V1.1
Quick Installation Guide
ALTRAD8UD-1L | ALTRAD8UD-1L2T
The server board User's Manual is available for download from the ASRock Rack's official website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board's components due to static electricity, NEVER place the
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever uninstall any component, place it on a grounded anti-static pad or in the bag that
comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
2 Motherboard Layout
1 2 3
FRNT_VGA1
OCU1 OCU2
LAN2
(ALTRAD8UD-1L2T only)
X550-AT2
(ALTRAD8UD-1L2T only)
LAN1
(ALTRAD8UD-1L2T only)
42
USB 3.2
Gen1 Ports
LAN3
T:USB3_2
B:USB3_1
41
USB 3.2
Gen1 Ports
IPMI
T:USB3_4
B:USB3_3
BIOS
ROM
UID1
40
39
ASPEED
AST2500
38
37
36
LED_LAN3 COM1
3 I/O Panel
1 2
No. Description
1 VGA Port (VGA1)
10G LAN RJ-45 Port (LAN2)
2
(ALTRAD8UD-1L2T only)
10G LAN RJ-45 Port
3 (LAN1, shared NIC)
(ALTRAD8UD-1L2T only)
4 USB 3.2 Gen1 Ports (USB3_1_2)
5
4
26.7 cm (10.5 in)
DDR4_D1
DDR4_C1
DDR4_B1
DDR4_A1
CPU1
DDR4_E1
DDR4_F1
DDR4_G1
DDR4_H1
PCIE7
ALTRAD8UD-1L
ALTRAD8UD-1L2T
PCIE6
PCIE5
PCIE4
USB3_3_1 HSBP1
IPMB1 BMC_SMB_1
TR1
34 33 32
35 31
5 7
3 4 6 8
No. Description
5 1G LAN RJ-45 Port (LAN3)
6 USB 3.2 Gen1 Ports (USB3_3_4)
7 LAN RJ-45 Port (IPMI)
8 UID Switch (UID1)
1 Install the Server Board
1
Insert the server board into the chassis.
2
A f f i x t he screws clock w ise into t he
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
6 7
ATX4PIN1
ATX12V1
SLIMLINE3
SLIMLINE4
BMC_DIS
TPM_BIOS_PH1
AUX_PANEL1 PANEL1
SPEAKER1
30 28 27 26 24
29 25
4 Install the Memory
1
Unlock a DIMM slot by
pressing the module clips
outward.
2
Insert the memory module.
3
Lock the clips.
www.asrockrack.com
8
No. Description
1 Front VGA Header (FRNT_VGA1)
2 OCuLink Connector (PCIe4.0 x4) (OCU1)
3 OCuLink Connector (PCIe4.0 x4) (OCU2)
PSU_SMB1
2 x 288-pin DDR4 DIMM Slots
9
4
(DDR4_A1, DDR4_C1)
SLIMLINE1
2 x 288-pin DDR4 DIMM Slots
10
5
(DDR4_B1, DDR4_D1)
SLIMLINE2
Micro-Fit ATX 4Pin Power Connector
6
(ATX4PIN1)
7 ATX 12V Power Connector (ATX12V1)
8 PSU SMBus Header (PSU_SMB1)
9 Slimline x8 Connector (SLIMLINE1)
11
PWM_CFG1
10 Slimline x8 Connector (SLIMLINE2)
PWM Configuration Header
12
11
(PWM_CFG1)
12 LGA 4926 CPU Socket (CPU1)
ATX12V2
13 ATX 12V Power Connector (ATX12V2)
13
14 Slimline x8 Connector (SLIMLINE3)
14
ATX12V3
15 ATX 12V Power Connector (ATX12V3)
15
16 16 Slimline x8 Connector (SLIMLINE4)
FAN1
17
17 System Fan Connector (FAN1)
FAN2
18 System Fan Connector (FAN2)
18
FAN3
19 System Fan Connector (FAN3)
19
FAN4 20 System Fan Connector (FAN4)
20
21 System Fan Connector (FAN5)
FAN5
21
22 BMC Disabled Jumper (BMC_DIS)
22
23 Clear CMOS Pad (CLRMOS1)
23
CLRMOS1
24 Speaker Header (SPEAKER1)
BAT1
25 System Panel Header (PANEL1)
26 Auxiliary Panel Header (AUX_PANEL1)
27 SPI TPM Header (TPM_BIOS_PH1)
M-key M.2 Socket (M2_1)
28
(Type 2260/2280)
M-key M.2 Socket (M2_2)
29
(Type 2260/2280)
Backplane PCI Express Hot-Plug Connector
30
(HSBP1)
31 USB 3.2 Gen1 Header (USB3_3_1)
32 BMC SMBus Header (BMC_SMB_1)
33 Thermal Sensor Header (TR1)
Intelligent Platform Management Bus Header
34
(IPMB1)
35 Serial Port Header (COM1)
36 Front LAN LED Connector (LED_LAN3)
37 PCI Express 4.0 x16 Slot (PCIE4)
38 PCI Express 4.0 x16 Slot (PCIE5)
39 PCI Express 4.0 x16 Slot (PCIE6)
40 PCI Express 4.0 x16 Slot (PCIE7)
2 x 288-pin DDR4 DIMM Slots
41
(DDR4_F1, DDR4_H1)
2 x 288-pin DDR4 DIMM Slots
42
(DDR4_E1, DDR4_G1)
ALTRAD8UD-1L ALTRAD8UD-1L2T