Page 1
Installation Guide Bath and Shower Faucet Trim K-T6900 K-T6902 K-T6904 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page“ Français-1” Español, página“ Español-1” 114495-2-BC...
If you do not understand any of the installation or temperature adjustment instructions in this document, in the United States please contact our Customer Service Department at 1-800-4-KOHLER. Outside the U.S., please contact your distributor. IMPORTANT NOTICE TO INSTALLERS! Please fill in the blanks in the information box in the Homeowners Guide and on the valve label.
To turn the valve off, gently turn it to the ″Off″ position. Shut off the main water supply. Kohler Co. reserves the right to make revisions in the design of products without notice, as specified in the Price Book. Kohler Co.
Page 4
Apply a bead of plumbers putty or other sealant around the inlet end of the spout according to the manufacturer’s instructions. Apply thread sealant to the nipple and thread the spout onto the nipple. Carefully tighten with a clean strap wrench. Remove all excess putty. 114495-2-BC Kohler Co.
Page 5
Press the escutcheon against the finished wall and secure with the setscrew. Remove all excess putty. With the showerhead off, flush out the system. Apply thread sealant tape to the shower arm and thread the showerhead to the shower arm. Kohler Co. 114495-2-BC...
Reinstall the O-ring, rotate the valve stem counterclockwise to shut the water off. Recheck the water temperature to ensure desired maximum water temperature. NOTE: After adjustment, complete the required information on the valve label (if supplied). 114495-2-BC Kohler Co.
Page 7
Press the handle body onto the valve stem. Secure with the screw. Snap the insert in place on the handle body. Thread the shell onto the handle body. Kohler Co. 114495-2-BC...
Need help?
Do you have a question about the K-T6900 and is the answer not in the manual?
Questions and answers