Supported Software - Compaq BL10e - HP ProLiant - 512 MB RAM Supported Configurations

Integrating microsoft windows server 2003 r2 on hp proliant servers
Hide thumbs Also See for BL10e - HP ProLiant - 512 MB RAM:
Table of Contents

Advertisement

NOTE
At this time, WS-Management Out of Band in iLO 2 is not
supported on HP ProLiant 300 and 500 Series Servers. Future
firmware versions may support this feature.

Supported software

Table 4 lists supported ProLiant utilities, drivers, and other value-add software and their corresponding
version needed for Windows Server 2003 R2.
Table 4. Supported ProLiant value-add software
Utility
ProLiant Support Pack (PSP) for
Microsoft Windows Server 2003
System Configuration Utility
Note 3:
For IPMI and WS-Management to work correctly on systems using the HP ProLiant Advanced or
Advanced and Enhanced System Management Controller Driver, the HP IPMI Provider, which is included in PSP
7.50 (or later), must be installed. The ProLiant 100 Series Servers and some newer systems that use the HP
ProLiant iLO2 Management Controller Driver do not need this provider because they have the necessary IPMI
hardware. For ProLiant servers without an IPMI BMC device, the HP IPMI Provider emulates the Microsoft IPMI
Provider by collecting IPMI data from the HP System Management Controller Driver and making it available
through the "root\hardware" WMI namespace.
Minimum version
7.50
3
2.58
Location
http://h18023.www1.hp.com/support/files/serve
r/us/locate/3376.html
http://h18023.www1.hp.com/support/files/serve
r/us/locate/1950.html
8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BL10e - HP ProLiant - 512 MB RAM and is the answer not in the manual?

Questions and answers

Table of Contents