Compaq BL10e - HP ProLiant - 512 MB RAM Supported Configurations page 12

Table 6. Smart Array Controllers requiring additional configuration when used as the boot controller
Serial controllers
Smart Array P600
Smart Array P400
Smart Array P400i
NOTE
Alternatively, you may set your array controller as the
secondary controller and install the OS to a SCSI controller.
Once the OS is installed, configure the array through the Array
Configuration Utility (ACU) using the PSP for Microsoft
Windows Server 2003 R2 Version 7.50A.
Insert the Windows Server 2003 R2 CD into CD-ROM drive to begin installation.
5.
After Windows Server 2003 R2 has been installed, install the Simple Network Management
6.
Protocol (SNMP), if you want to use the functionality of the ProLiant Management Agents.
a. Select the Control Panel from the Start menu.
b. Select Add/Remove Programs.
c. Click Add/Remove Windows Components.
d. Select Management and Monitoring Tools from the list of components.
e. Click Details.
f. Select Simple Network Management Protocol so that a checkmark is displayed in the
checkbox.
g. Click OK and then Next.
h. Click Finish.
Parallel SCSI controllers
Smart Array 6404
Smart Array 6402
Smart Array 642
Smart Array 641
Smart Array 6i
Retired controllers
Integrated Smart Array Controller
Smart Array 5i
Smart Array 532
Smart Array 5300
Smart Array 5312
12