Pre-Installation Tasks - Compaq BL10e - HP ProLiant - 512 MB RAM Supported Configurations

Pre-installation tasks

To prepare for installation, gather the supported software detailed below.
• Obtain ProLiant Support Pack (PSP) for Microsoft Windows Server 2003 Version 7.50A (or later) at
http://h18023.www1.hp.com/support/files/server/us/locate/3376.html
7.50 CD. This PSP contains device drivers, management agents, and utilities supported under
Windows Server 2003 R2.
NOTE
Once the ProLiant Support Pack for Microsoft Windows Server
2003 Version 7.50A (or later) is installed, you can use HP
Systems Insight Manager available at
to manage your Windows Server 2003 R2 servers.
• For the ProLiant servers listed in Table 5, obtain System Configuration Utility Version 2.58 (or later)
at http://h18023.www1.hp.com/support/files/server/us/locate/1950.html
associated bootable diskette set. Run the utility and verify that all system configuration options
conform to those listed for the chosen platform.
IMPORTANT
Create the bootable diskette set if you plan to use the SmartStart
Assisted Installation Path.
Table 5. ProLiant servers with System Configuration Utility support
Compaq ProLiant HP ProLiant DL
servers servers
ProLiant CL380 ProLiant DL360
ProLiant 3000 ProLiant DL380
ProLiant 5500
ProLiant 6000
ProLiant 6400R
ProLiant 6500
ProLiant 7000
ProLiant 8000
ProLiant 8500
Other ProLiant servers use the ROM-Based Setup Utility (RBSU). This utility can be used in place of
the System Configuration Utility and must be used to specify the operating system on the server if
you are using the SmartStart Assisted Installation Path.
www.hp.com/go/hpsim
HP ProLiant ML
servers
ProLiant ML150
ProLiant ML150 G2
ProLiant ML330
ProLiant ML350
ProLiant ML370
ProLiant ML530
ProLiant ML570
or from the SmartStart
and create the
10