Return To Default - Compaq 8000 - Elite Convertible Minitower PC Configuration

Return to Default

Return to Default is also know as Unprovisioning. An AMT Setup and Configured system can be unprovi-
sioned. It is done through the AMT Configuration Screen and the Un-Provision option.
Figure 12 Intel AMT Unprovisioning Screen
Depending on how the system was previously provisioned, one or both unprovisioning options may
appear.
Select Un-Provision, and then select the appropriate unprovision mode.
1.
Full unprovisioning is available for SMB and Enterprise mode provisioned systems. It will return all
AMT Configuration settings to factory defaults. All certificate hashes will be deleted and the default
hash will be made active. It does not reset ME Configuration settings or passwords.
Partial unprovisioning is available for Enterprise mode provisioned systems. Partial unprovisioning will
return all AMT Configuration setting to factory defaults with the exception of the PID, PPS, and PKI-
CH. It does not reset ME Configuration settings or passwords.
Select Return to previous menu.
2.
Select Exit, and then select Y.
3.
The system reboots.
A partial unprovisioning will re-open the network interface for six hours of Hello message broadcasts.
31