Security Dialog Box - Dell Console Switch User Manual

Dell console switch installer/user's guide
Hide thumbs Also See for Console Switch:
Table of Contents

Advertisement

Type the new password in the New text box and press <Enter>.
2
Passwords must contain both alpha and numeric characters, are case sensitive and may be up to
12 characters long. Legal characters are: A to Z, a to z, 0 to 9, space and hyphen.
In the Repeat box, type the password again and press <Enter>.
3
Click OK to change only your password, and then close the dialog box.
4
NOTE:
If you should lose or forget your password, you must return your switch for service or technical
support.
To password protect your console:
Set your password as described in the previous procedure
1
Select Enable Screen Saver
2
Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of
3
password protection and the screen saver feature.
For Mode, select Energy if your monitor is E
4
Screen.
CAUTION:
Monitor damage can result from the use of Energy mode with monitors not compliant with
E
S
®.
NERGY
TAR
(Optional) Click Test to activate the screen saver test, which lasts 10 seconds then returns you
5
to the Security dialog box.
Click OK.
6
To log in to your console:
Press any key or move the mouse.
1
The Password dialog box appears. Type your password, then click OK.
2
The Main dialog box appears if the password was entered properly.
3
To remove password protection from your console:
From the Main dialog box, click Setup - Security; the Authorize dialog box appears. Type
1
your password, then click OK.
In the Security dialog box, single-click and press <Enter> or double-click in the New box.
2
Leave the box blank. Press <Enter>.
Single-click and press <Enter> or double-click in the Repeat box. Leave the box blank. Press
3
<Enter>.
Click OK to eliminate your password.
4
To enable the screen saver mode with no password protection:
If your console does not require a password to gain access to the Security dialog box, proceed
1
to step 2.
-or-
If your console is password protected, see the previous procedure, then go to step 2.
.
NERGY
.
TAR ®
S
compliant; otherwise select
33
Basic Operation

Advertisement

Table of Contents
loading

Table of Contents