Scan Dialog Box - Dell Console Switch User Manual

Figure 3-16. Scan Dialog Box
The dialog box contains a listing of all servers attached to your appliance. Click the check box
3
next to the servers you wish to scan.
-or-
Double-click on a server's name or port.
-or-
Press <Alt > and the number of the server you wish to scan. You can select up to 16 servers from
the entire list.
In the Scan Time box, type the number of seconds (from 3 to 99) of desired time before the
4
scan moves to the next server in the sequence.
Click OK.
5
To remove a server from the scan list:
In the Scan dialog box, deselect the check box next to the server to be removed.
1
-or-
Double-click on the server's name or port.
-or-
Click the Clear button to remove all servers from the scan list.
Click OK.
2
To set the Scan duration:
Type a value in the Scan Time box. The duration you type must be a minimum of 3 seconds
1
and a maximum of 255 seconds.
To start the scan mode:
If the OSCAR interface is not open, press
1
Click Commands. The Commands dialog box appears.
2
The Main dialog box will appear.
Print Screen
< >.
39
Basic Operation