Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showgear VIBE FX Pulse Bar UVW ● 12V DC power adapter (1,1 m) ●...
Page 4
● If your Showgear device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showgear dealer for service.
VIBE FX Pulse Bar UVW Operating Determinations ● This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. ● The minimum distance between light output and the illuminated surface must be bigger than 1 meter.
VIBE FX Pulse Bar UVW The VIBE FX Pulse Bar UVW can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug.
VIBE FX Pulse Bar UVW Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
VIBE FX Pulse Bar UVW Description of the device Features The VIBE FX Pulse Bar UVW is a UV lightbar and strobe with high output and great effects. ● Input voltage: 100-240V AC 50/60Hz, via the supplied 12V DC adapter ●...
VIBE FX Pulse Bar UVW Backside Fig. 02 06) 12V DC power connector IN 07) Built-in microphone 08) LED indicator 09) Sound sensitivity control 10) Strobe mode (8 modes) control button, press repeatedly to choose between: Mode 1: Black out Mode 2-6: Strobe speed (from slow to fast) Mode 7: Full on Mode 8: Sound mode...
VIBE FX Pulse Bar UVW Control Modes There are 3 modes: ● Auto ● Sound-controlled ● Strobe One Pulse Bar UVW (Auto and Strobe) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141).
VIBE FX Pulse Bar UVW 1. Auto Mode 01) Press the button to activate Auto mode. 02) The device will now run the built-in auto show. 2. Sound-controlled Mode 01) Press the button to activate Sound-controlled mode. 02) Turn the sound sensitivity control (09) to the left or right, in order to decrease/increase the sound sensitivity.
01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Pulse Bar UVW to your Showgear dealer. 03) If all of the above appears to be O.K., plug the unit in again.
Need help?
Do you have a question about the VIBE FX Pulse Bar UVW V1 and is the answer not in the manual?
Questions and answers