VIBE FX Strike Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Laser Safety For a Class 2 Laser Product ........................5 Rigging .................................... 7 Connection with the mains............................7 Return Procedure ................................8 Claims ....................................8 Description of the device ..............................
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showgear VIBE FX Strike ● 1 x mounting bracket ●...
Page 4
VIBE FX Strike IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device. ● Never let the power cord come into contact with other cables! Handle the power cord and all connections with the mains with particular caution! ●...
● If your Showgear device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showgear dealer for service.
VIBE FX Strike Laser Safety For a Class 2 Laser Product Laser Light is different from any other light source with which you may be familiar with. The light from this product can potentially cause instant eye injury if not set up and used properly.
Page 7
VIBE FX Strike The legal requirements for using laser entertainment products vary from country to country. The user is responsible for the legal requirements at the location/country of use. Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of Lasers”, available from www.laserinstitute.org.
The VIBE FX Strike can be placed on a flat stage floor or be mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug.
VIBE FX Strike Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
VIBE FX Strike Description of the device Features The VIBE FX Strike is a laser effect with high output and great effects. ● Power supply: 100-240V AC 50/60Hz; 5V/1A DC via the included power adapter ● Laser class: 2 ●...
08) 5V DC power adapter connector IN 09) Cooling fan Installation Remove all packing materials from the VIBE FX Strike. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly.
VIBE FX Strike Control Modes There are 3 modes: ● Auto ● Sound-controlled ● Intelligent One Strike (Auto, Intelligent) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141).
04) The electric power supply cables must not show any damages or material fatigue. The VIBE FX Strike requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth.
Suspect two potential problem areas as: the power supply and the laser. 01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The laser. Return the Strike to your Showgear dealer. 03) If all of the above appears to be O.K., plug the unit in again.
VIBE FX Strike Product Specifications Model: Showgear VIBE FX Strike Power supply: 100-240V AC 50/60Hz; 5V/1A DC via the included power adapter Dimensions: 107 x 105 x 90 mm (LxWxH) Weight: 0,2 kg Electro-mechanical effects Laser class: Laser color: Red, Green...
Need help?
Do you have a question about the VIBE FX Strike and is the answer not in the manual?
Questions and answers