Subscribe to Our Youtube Channel
Related Manuals for Showgear VIBE FX Image Spot
Summary of Contents for Showgear VIBE FX Image Spot
- Page 1 MANUAL ENGLISH VIBE FX Image Spot Ordercode: 950105 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
VIBE FX Image Spot Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................5 Return Procedure ................................5 Claims ....................................5 Description of the device ..............................6 Frontside..................................6 Backside .................................. -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showgear VIBE FX Image Spot with a power adapter (2,5 m) ● Mounting screw ●... - Page 4 ● If your Showgear device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showgear dealer for service.
-
Page 5: Operating Determinations
Do not attempt the installation yourself ! Always let the installation be carried out by an authorized dealer ! The VIBE FX Image Spot can be placed on a flat stage floor or installed inground. Improper installation can cause serious injuries and/or damage of property! -
Page 6: Connection With The Mains
VIBE FX Image Spot Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER PHASE... -
Page 7: Description Of The Device
VIBE FX Image Spot Description of the device Features The VIBE FX Image Spot is a high-resolution projection fixture with high output and great effects. ● Input voltage: 100-240V AC 50/60Hz; 12V DC via the supplied adapter (IP-44) ● Power consumption: 11W ●... -
Page 8: Backside
08) Power cable (2,5 m) Installation Remove all packing materials from the VIBE FX Image Spot. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. -
Page 9: Gobo Installation
VIBE FX Image Spot Gobo Installation 01) Open the Image Spot to reveal the gobo holder. Fig. 04 02) Take one of the included 6 gobos and insert it into the gobo holder (04) (fig. 05). 03) Turn the gobo to secure it in position (fig. 06). -
Page 10: Set Up And Operation
04) The electric power supply cables must not show any damages or material fatigue. The VIBE FX Image Spot requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. -
Page 11: Troubleshooting
01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Image Spot to your Showgear dealer. 03) If all of the above appears to be O.K., plug the unit in again. -
Page 12: Dimensions
VIBE FX Image Spot Dimensions Ordercode: 950105... -
Page 13: Notes
VIBE FX Image Spot Notes Ordercode: 950105... - Page 14 VIBE FX Image Spot Ordercode: 950105...
- Page 15 VIBE FX Image Spot Ordercode: 950105...
- Page 16 ©2017 Showgear...
Need help?
Do you have a question about the VIBE FX Image Spot and is the answer not in the manual?
Questions and answers