Compaq V.90 Integrated Modem Commands
AT FAX Command Set
Class 1 FAX Commands
The Lucent Technologies HSM Data/FAX Complete Chip Set supports FAX commands
conforming to EIA standard 578. These commands are given here with short descriptions;
complete explanations are given in the standard, available from the Electronic Industry
Association.
AT FAX Command Set Summary
Command
+FCLASS?
+FCLASS = ?
+FCLASS = n
+FTS = <n>
+FRS = <n>
+FTM = <m>
+FRM = <m>
+FTH = <m>
+FRH = <m>
+FTM = ?
+FRM = ?
+FTH = ?
+FRH = ?
+FMI?
+FMM?
+FMR?
+FPR = <n>
+FPR = ?
+FPR?
+FAA = <n>
+FAA = ?
+FAA?
ECG021/1298
Description
Service class indication
Service class capabilities
Service class selection
Transmission silence
Receive silence
Transmit FAX data with <m> carrier
Receive FAX data with <m> carrier
Transmit HDLC data with <m> carrier
Receive HDLC data with <m> carrier
Transmit FAX modulation
Receive FAX modulation
Transmit HDLC Data modulation
Receive HDLC Data modulation
Manufacturer Identification
Product Identification
Version/Revision Information
Set DTE-DCE Fax port rate
Reports all fax port rate that DCE supports
Reports the current fax port rate of DTE-DCE
Set DCE Adaptive answer mode
Display valid adaptive answer values that DCE supports
Display current set value of adaptive answer mode
39