Compaq 244100-005 - Deskpro 2000 - 16 MB RAM White Paper page 33

Compaq V.90 Integrated Modem Commands
S10 Automatic Disconnect Delay
This register sets the length of time, in tenths of a second, that the modem waits before hanging
up after a loss of carrier. This allows for a temporary carrier loss without causing the local
modem to disconnect.
The actual interval the modem waits before disconnecting is the value in register S10.
Range:
Default:
Units:
S11 DTMF Dialing Speed
This register determines the dialing speed which is prefixed for each country.
Range:
Default:
Units:
S12 Escape Guard Time
This register sets the value (in 20 ms increments) for the required pause after the escape sequence
(default 1 s).
Range:
Default:
Units:
S14 General Bit Mapped Options Status
Indicates the status of command options. Only bit 3 and bit 6 are used, read-only.
Bit 3
Bit 6
Default:
ECG021/1298
1-254
20
.1 seconds
50-150
95
.001 seconds
0-255
50
.02 seconds
Result codes (Vn)
0 = Numeric (V0)
1 = Verbose (V1) (Default)
Pulse dial PPS selection (&Pn)
0 = 10 PPS (&p0, &p1) (Default)
1 = 20 PPS (&p2)
8 (00001000b)
33