Removing A Diskette Drive From The Drive Cage - Compaq 141536-002 - Deskpro EN - MT RAMBUS Hardware Reference Manual

Slim desktop models
Hide thumbs Also See for 141536-002 - Deskpro EN - MT RAMBUS:
Table of Contents

Advertisement

Removing a Diskette Drive from the Drive Cage

1.
If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock and disable the Smart Cover Sensor.
2.
Shut down the operating system properly, turn off the computer,
disconnect the power cord from the electrical outlet, and remove
the computer cover.
3.
Rotate the drive cage to its upright position.
4.
Disconnect the drive power cable and signal cable.
5.
Pull the green drive release latch to the right
6.
Slide the drive out of the drive cage
Removing a Diskette Drive from the Drive Cage
7.
Store the drive in antistatic packaging.
.

.

Hardware Reference Guide 2-17

Advertisement

Table of Contents
loading

Table of Contents