Sata Settings Screen - Dell PowerEdge T110 Hardware Owner's Manual

Option
Logical Processor
(Enabled default)
Virtualization Technology
(Disabled default)
Execute Disable
(Enabled default)
Number of Cores per
Processor
(All default)
C States
(Enabled default)
Turbo Mode
(Enabled default)
Processor 1 Family -
Model-Stepping
Level 2 Cache
Number of Cores

SATA Settings Screen

Option
SATA Controller
(AHCI default)
40
Using the System Setup Program and UEFI Boot Manager
Description
On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled, the BIOS reports both logical processors. If set
to Disabled, only one logical processor is monitored by
the BIOS.
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE:
Disable this feature if your system will not be
running virtualization software.
Enables or disables Execute Disable Memory Protection
Technology.
If set to All, the maximum number of cores in each
processor is enabled.
When set to Enabled, the processor can operate in all
available power states.
If Turbo Boost Technology is supported by the processor,
enables or disables Turbo Mode.
Displays the family, model, level 2 cache size, level 3,
cache size, and number of cores of the processor.
Displays the amount of cache memory for the processor.
This option does not have user-selectable settings.
Displays the number of cores in the processor. This
option does not have user-selectable settings.
Description
Allows the embedded SATA to be set to Off, ATA, AHCI,
or RAID modes.
NOTE:
The UEFI support is disabled if SATA is set to the
RAID mode.