Table of Contents
Advertisement
2
Computer Setup (F10) Utility
The computer setup utility differs for the different models.
Compaq 315eu MT Model – Computer Setup (F10)
Utilities
Use Computer Setup (F10) Utility to do the following:
●
Change factory default settings.
●
Set the system date and time.
●
Set, view, change, or verify the system configuration, including settings for graphics, audio,
storage, communications, and input devices.
●
View settings for processor and memory.
●
Modify the boot order of bootable devices such as hard drives, optical drives, or USB flash
media devices.
●
Run hard drive self-tests.
●
Establish a supervisor password that controls access to Computer Setup (F10) Utility and the
settings described in this section.
Using Computer Setup (F10) Utilities
Computer Setup can be accessed only by turning the computer on or restarting the system.
To access the Computer Setup Utilities menu, complete the following steps:
1.
Turn on or restart the computer.
2.
As soon as the computer is turned on, press
system to enter Computer Setup.
NOTE:
again press
3.
The Computer Setup Utility screen is divided into menu headings and actions.
4
Chapter 2 Computer Setup (F10) Utility
If you do not press
F10
F10
before the computer boots to the operating system to access the utility.
F10
before the computer boots to the operating
at the appropriate time, you must restart the computer and
Advertisement
Table of Contents
