Apm Configuration - Asus S1-AT5NM10E User Manual

4.5.5

APM Configuration

Restore on AC Power Loss
Resume On RTC Alarm
Power On By Ring
Power On By PME
Power On By Remote Control
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On]
[Last State]
Resume On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]
Power On By Ring [Disabled]
Allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On By PME [Disabled]
Enables or disables PME wake from sleep states. Configuration options: [Disabled]
[Enabled]
Power On By Remote Control [Disabled]
Enables or disables a remote control to power up the system or wake up the
system from S3, S4, and S5 sleep states. Configuration options: [Enabled]
[Disabled]
ASUS S1-AT5NM10E
S1-AT5NM10E BIOS Setup
Power
[Power off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Version 0103
Options
Power Off
Power On
Last State
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4-21