4.5
Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM). Select an item then press <Enter> to display the
configuration options.
Main
Advanced
Suspend Mode
ACPI 2.0 Support
ACPI APIC Support
Control Eup
A PM Configuration
Hardware Monitor
4.5.1
Suspend Mode [S3 only]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state
to be used for system suspend. Configuration options: [S3 Only]
4.5.2
ACPI 2.0 Support [Enabled]
Allows you to add more tables for Advanced Configuration and Power Interface
(ACPI) 2.0 specifications. Configuration options: [Disabled] [Enabled]
4.5.3
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set
to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
4.5.4
Control Eup [Disabled]
Allows you enable or disable Control Eup. Configuration options: [Enabled]
[Disabled]
4-20
S1-AT5NM10E BIOS Setup
Power
Boot
[S3 only]
[Enabled]
[Enabled]
[Disabled]
Tools
Exit
Hardware Monitor
Functions
+-
F1
F10
ESC
Version 0103
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
Chapter 4: BIOS setup