Table of Contents
Advertisement
5.1.4 Using ASUS EZ Flash to update the BIOS
The ASUS EZ Flash feature allows you to easily update the BIOS without
having to go through the long process of booting from a floppy disk and
using a DOS-based utility. The EZ Flash is built-in the BIOS LPC chip so it is
accessible by simply pressing <Alt> + <F2> during the Power-On Self Tests
(POST).
To update the BIOS using ASUS EZ Flash:
1.
Visit the ASUS website (www.asus.com) to download the latest BIOS
file for your motherboard and rename it to P4P8T.ROM. Save the BIOS
file to a floppy disk.
2.
Reboot the system.
3.
To launch EZ Flash, press <Alt> + <F2> during POST to display the
following.
User recovery requested. Starting BIOS recovery...
Checking for floppy...
If there is no floppy disk found in the drive, the error message
"Floppy not found!" appears.
If the correct BIOS file is not found in the floppy disk, the error message
"P4P8T.ROM not found!"
4.
Insert the floppy disk that contains the BIOS file. If the P4P8T.ROM file
is found in the floppy disk, EZ Flash performs the BIOS update process
and automatically reboots the system when done.
DO NOT shutdown or reset the system while updating the BIOS! Doing
so may cause system boot failure!
User recovery requested. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file "p4p8t.rom". Completed.
Start flashing...
Flashed successfully. Rebooting.
92
Chapter 5: BIOS setup
Hide quick links:
Advertisement
Table of Contents
