3.6.1 LED indicators
The wireless LAN adapter comes with a
Data Transmission (Green AIR) and
Network Link (Yellow LINK) LED
indicators. Refer to the table below for
LED indications.
AIR
LINK
Fast Blink
ON
OFF
Blink
3.6.2 Antenna installation
Connect the dipolar antenna to the antenna connector (male) of the
wireless LAN adapter before installing the device drivers and utilities.
Place the antenna at an elevated location to receive or transmit better
signal. Do not place the antenna under your table or in a closed
compartment.
62
ON
The wireless LAN adapter is on and is transmitting/receiving data.
ON
The wireless LAN adapter is on but no data activity.
OFF
The wireless LAN adapter is off or disabled.
OFF
The wireless LAN adapter is not connected to a wireless network.
LINK LED
Indications
Chapter 3: Starting up
AIR LED