Related Manuals for Ametek SURGEX AXESS+ SX-AP-129
Summary of Contents for Ametek SURGEX AXESS+ SX-AP-129
- Page 1 Quick Start Guide Switched IP Controllable Surge Protected PDU SX-AP-129 | SX-AP-169 | SX-AP-109i | SX-AP-169i © 2024 AMETEK SurgeX | Technical Support: 800-645-9721 | surgex.com | B01-00007...
- Page 2 The web server will always be accessible at https://169.254.10.100 through this USB port. The web server on this interface cannot be changed and will always be unsecured HTTP at port 80. © 2024 AMETEK SurgeX | Technical Support: 800-645-9721 | surgex.com...
- Page 3 If the button is held for less than 10 seconds, the unit will perform a software reset that will not reset any data, or power cycle the connected equipment. © 2024 AMETEK SurgeX | Technical Support: 800-645-9721 | surgex.com...
-
Page 4: Rack Installation
Axess+ is designed to be installed in the equipment rack. The supplied nuts, bolts, and washers must be used to mount the Axess+ to the rack through the mounting holes (A), (B), (C), or (D) following the appropriate local regulations and requirements. © 2024 AMETEK SurgeX | Technical Support: 800-645-9721 | surgex.com... - Page 5 Quick Start Guide © 2024 AMETEK SurgeX | Technical Support: 800-645-9721 | surgex.com...
- Page 6 IP table built into the network’s router. Using any web browser, type in the unit’s IP address to access the login page. The default login credentials are: Username: admin Password: Adm1nXXXXXX © 2024 AMETEK SurgeX | Technical Support: 800-645-9721 | surgex.com...
- Page 7 Username: admin Password: Adm1nXXXXXX Where XXXXXX are the last 6 characters of the unit’s MAC address. Change your password after logging in for the first time to minimize security issues. © 2024 AMETEK SurgeX | Technical Support: 800-645-9721 | surgex.com...
Need help?
Do you have a question about the SURGEX AXESS+ SX-AP-129 and is the answer not in the manual?
Questions and answers