Apm Configuration; Hardware Monitor - Asus P6-M4A3000E User Manual

4.5.4 APM Configuration

APM Configuration

Restore on AC Power Loss
Power On From S5 By PME#
Power On From S5 By RTC Alarm
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On]
[Last State]
Power.on.From.S5.By.PME#.[Disabled]
Enables or disables PME wake from sleep states.
Configuration options: [Disabled] [Enabled]
Power.on.From.S5.By.RTC.Alarm.[Disabled]
Enables or disables RTC to generate a wake event.
Configuration options: [Disabled] [Enabled]
4.5.5. Hardware.Monitor

Hardware Monitor

CPU Temperature
MB Temperature
CPU Fan Speed
Chassis Fan Speed
VCORE Voltage
3.3V Voltage
5V Voltage
12V Voltage
Smart Q-Fan Function
CPU.Temperature.[xxxºC/xxxºF].
MB.Temperature.[xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU / MB
temperature. Select Ignored if you do not wish to display the detected temperature.
ASUS P6-M4A3000E
BIOS SETUP UTILITY
Power
[Power Off]
[Disabled]
[Disabled]
BIOS SETUP UTILITY
Power
[43ºC/109ºF]
[31ºC/87.5ºF]
[3515RPM]
[N/A]
[ 1.360V]
[ 3.320V]
[ 5.053V]
[12.251V]
[Enabled]
Options
Power Off
Power On
Last State
CPU Temperature
4-19