Boot Device Priority; Boot Settings Configuration - Asus P6-M4A3000E User Manual

4.6.1. Boot.Device.Priority

Boot Device Priority

1st Boot Device
2nd Boot Device
3rd Boot Device
1st.~.xxth.Boot.Device.[Removable]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
Configuration options: [Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled]
• To select the boot device during system startup, press <F8> when ASUS
Logo appears.
• To access Windows
•
•
4.6.2 Boot Settings Configuration

Boot Settings Configuration

Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For 'F1' If Error
Hit 'DEL' Message Display
Quick.Boot.[Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to.[Enabled].to use the ASUS MyLogo 2™ feature.
ASUS P6-M4A3000E
BIOS SETUP UTILITY
Boot
[Hard Drive]
[ATAPI CD-ROM]
[Removable Dev.]
OS in Safe Mode, do any of the following:
®
Press <F5> when ASUS Logo appears
Press <F8> after POST.
BIOS SETUP UTILITY
Boot
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Enabled]
[Enabled]
Specifies the boot
sequence from the
available devices.
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
4-21