Table of Contents
Advertisement
4.1.2.
ASUS.EZ.Flash.2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
Before you start using this utility, download the latest BIOS file from the ASUS
website at www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port,
then launch EZ Flash 2 in any of these two ways:
Press <Alt>.+.<F2> during POST.
•
Enter the BIOS setup program. Go to the Tools menu to select EZ.Flash. .
•
.
2 and press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is
found.
FLASH TYPE:
BOARD:M4A3000E
VER:
DATE:
PATH:
A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
2.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
This function supports USB flash disks with FAT.32/16 format and single
•
partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
ASUS P6-M4A3000E
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
MXIC 25L8005
Current ROM
0305
(H:00 B:01)
01/21/2010
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[Tab] Switch
[V] Drive Info
[B] Backup
[ESC] Exit
4-5
Hide quick links:
Advertisement
Table of Contents
