2.11 Installing the foot stands
You need to install the foot stands to place the system vertically on your
desktop.To install the foot stands:
1.
Lay the system on its side on a
flat, stable, and elevated surface,
then locate two screw holes on
the left side of the system.
2.
Extend the left side of the
system at least 3 cm from the
edge of the surface to facilitate
installation.
3.
Align the foot stand and chassis
screw holes.
4.
Drive in a screw to secure the
footstand to the chassis.
5.
Follow the same procedures when
installing the second foot stand.
The photo on the right shows
the system in a vertical desktop
placement.
2-22
Chapter 2: Basic installation