5.
Connect the CPU fan cable to the CPU_FAN connector on the
motherboard.
CPU Fan connector
Do not forget to connect the CPU fan connector! Hardware monitoring
errors can occur if you fail to plug this connector.
2.5
Installing a DIMM
The system motherboard comes with two Double Data Rate 2 (DDR2) Dual
Inline Memory Module (DIMM) sockets.
The following figure illustrates the location of the sockets:
2.5.1
Memory configurations
You may install 256 MB, 512 MB, and 1 GB unbuffered ECC/non-ECC DDR2
DIMMs into the DIMM sockets.
For optimum compatibility, we recommend that you obtain memory
modules from the same vendor. Visit the ASUS website (www.asus.com)
for the latest Qualified Vendors List..
2-8
240-pin DDR2 DIMM Sockets
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
Chapter 2: Basic installation