Table of Contents
Advertisement
3.
Align the metal clips to the side rail of
the CPU fan and heatsink assembly,
with the locking levers in the reverse
orientation.
4.
Snap the hook of each metal clip into
the hold of the retention module.
5.
Carefully press down the locking lever
and hook its end into the retention
module.
6.
Position the blower on top of the CPU
fan and heatsink assembly.
7.
Secure the blower to the CPU fan and
heatsink assembly with the screws
you removed earlier.
Do not forget to connect the CPU fan connector! Hardware monitoring errors
can occur if you fail to plug this connector.
ASUS P2-M2A690G
metal clips
3
4
hook
6
7
7
2-9
Advertisement
Table of Contents
