1.0 Important Safety Instructions
1.1 Safety Instructions
1.1.1 Read these instructions.
1.1.2 Keep this user manual in a safe and accessible place.
1.1.3 Take note of all warnings to avoid injury or damage.
1.1.4 Follow all instructions.
1.1.5 The safety instructions provided herein are for illustrative purposes that include but are
not limited to those listed in this manual. Actual operation shall comply with all applicable safety
standards.
1.1.6 Always operate or store the equipment in the conditions specified in this manual. The
installation and ambient conditions must comply with the regulations in the relevant national and
local standards.
1.1.7 Avoid unauthorized disassembly, equipment replacement, or modification of software codes.
1.1.8 Natures Generator Inc shall not be liable for the equipment damages, personal injury, property
loss or other damages resulting from the following circumstances:
• Force majeure events such as earthquakes, fires, storms, floods, or mudslides.
• Damages caused by improper handling and installation.
• Damages resulting from inadequate storage conditions as specified in the manual.
• Hardware or data damage caused by customer negligence, improper operation, or intentional
actions.
• System damage caused by third parties or customers.
• Adjustments, changes, or removal of labels in violation of this manual.
1.1.9 This product is not intended for use with devices that have high-performance requirements for
UPS (Uninterruptible Power Supply), including but not limited to data servers, workstations, medical
equipment, and similar devices.
1.2 General Requirements
1.2.1 Do not install, use or maintain this equipment near water.
1.2.2 Do not install, use and maintain this equipment in adverse weather conditions such as lightning,
rain, storm, snow and earthquake.
1.2.3. Keep this equipment away from heat sources or high temperatures or direct sunlight.
1.2.4 Do not insert foreign objects into or block any ventilation openings.
1.2.5 Always turn off the power source before starting any electrical work.
1.2.6 Allow a minimum 12 inch clearance from all sides of the equipment for proper air ventilation to
dissipate heat.
1.2.7 Do not use near flammable gases or fumes or other equipment that produce a large amount of
heat.
1.2.8 Do not store this equipment with flammable or explosive materials.
1.2.9 Do not place the equipment on an unstable or inclined surface.
1.2.10 Use the equipment for its intended purpose and avoid stacking objects on top of it during
storage or use.
1.2.11 Keep the system out of the reach of children and pets.
1.2.12 Only use attachments/accessories approved by the manufacturer.
1.2.13 Regularly inspect the equipment and its accessories for damage or deterioration.
1.2.14 Refer all servicing to qualified service personnel. Servicing is required when the equipment
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the equipment, the equipment has been exposed to rain or moisture, has
been dropped or does not operate normally.
Visit Naturesgenerator.com for More Information
1
Need help?
Do you have a question about the MyGrid 10K and is the answer not in the manual?