Phillips Connect AssetTrac Troubleshooting Manual page 2

Connector for Optional
Power Harness
1. Quick Overview
a. AssetTrac With Tether Harness
i. Optional cable that connects to Battery or ABS
to supply power to unit. (Figure 1)
1. Pin 2 Ground
2. Pin 3 Power (12 Volts)
ii. Contact Reseller Help Desk or Sales to inquire
about optional cable.
b. AssetTrac Untethered (Most Common use)
i. The unit works on Battery. No External Power Connected.
ii. Designed to hold 5000 reports
iii. Battery designed to last 3+ Years
1. Battery is not a rechargeable battery
c. All units come with a Shipping Plug. This plug keeps the unit in ship mode and will not connect to
GPS or Cell.
i. The Shipping plug needs to be removed prior to installation.
ii. The shipping plug can also be used to do a soft reset of the unit. This will just reboot the
unit and not clear any trip data.
d. LED Indicators
i. LED indicators will not show if the unit is not powered externally.
ii. The LED indicators behaviors are in the table 1. (Not Valid for units untethered)
e. Location of indicator lights
i. Located on top of unit alongside of Solar Panel
f. Meaning of the lights:
i. Red – GPS Locked
ii. Green – Cellular Connected
iii. Orange – Senses vibration
Countersunk Screw Hole
2
Indicator LED's
Shipping Plug
Figure 1