Wireless Connection; Finding The Video Channel On Your Tv - Magnavox MBP5130 Owner's Manual

Wireless Connection

Make the following connection if you are using a wireless router.
Networking equipment
(modem,etc.)
Internet
Note
• After you made the wireless connection, set up necessary network settings.
(For network setting of wireless connection, refer to "Wireless" on page 41.)
• For a wireless router, use a router which supports IEEE 802.11 b/g/n.
(n is recommended for stable operation of the wireless network.)
• Set the wireless router to Infrastructure mode. This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to the wireless network connection.

Finding the Video Channel on Your TV

After you have completed all the connections, you must find the correct video channel (external input
channel) on your TV.
1 After you have made all the necessary connections, press [STANDBY/ON y ] to turn on the unit.
2 Turn on your TV.
3 Press the button on the TV's remote control that accesses the external input channel. It may be
labeled "SOURCE", "AV" or "SELECT" (refer to your TV's user manual).
Watch HD movies
Note
• If the TV is connected by an HDMI cable, it may take a while for the opening picture to come up.
LAN
LAN WAN
LAN cable(not supplied)
COAXIAL
L
Wireless LAN
HDMIOUT
R
AUDIO VIDEO
OUT OUT
Hub or wireless broadband router
13