4.
CONNECTIONS
4.1. Connection to a TV
HDMI Connection (Supports up to 1080i
VIDEO OUT
AUDIO OUT
LAN
HDMI OUT
No analog audio connection required.
Outputs video data with a frame rate of 30 frames per second.
(*1)
1080i:
Outputs video data with a frame rate of 60 frames per second.
(*2)
1080p:
1080p/24: Outputs video data with a frame rate of 24 frames per second.
(*3)
•
Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector
are matched.
•
When connected to an HDCP incompatible display device, the picture will not be displayed properly.
•
Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable (also
known as HDMI category 2 cable) is recommended for better compatibility.
D Note
•
If the TV receives no Audio / Video signal after properly connecting the unit and the TV with an HDMI cable, it may be
the TV. Please refer to the TV's user's manual.
•
If the TV receives no Audio signal after properly connecting the unit and the TV with an HDMI cable, make sure the TV
input is not an HDMI-DVI Input terminal.
Standard Composite Video + Standard Audio Connection (Supports only 480i resolution.)
LAN
VIDEO OUT
AUDIO OUT
•
Connect this unit directly to the TV. If the audio / video cables are connected to a VCR then the pictures may be
distorted due to the copyright protection system.
EN - 10
L
R
HDMI OUT
HDMI cable
(not supplied)
L
R
HDMI OUT
L
R
Video cable (not supplied)
VIDEO OUT
AUDIO OUT
(*1)
(*2)
, 1080p
, 1080p/24
Your TV
HDMI IN
Audio cable
(not supplied)
(*3)
resolution.)
VIDEO IN
L
AUDIO IN
R
Your TV