Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ACTi R71CF-39
Summary of Contents for ACTi R71CF-39
- Page 1 Face Recognition Reader & Controller User’s Manual R71CF-39 2025/02/27...
-
Page 2: Regulatory Information
2. This device must accept any interference received, including interference that may cause undesired operation. Now that the camera and the PC are both having their unique IP addresses and are under the same network segment, it is possible to use the Web browser of the PC to access the camera. www.acti.com... - Page 3 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. www.acti.com...
-
Page 4: Safety Information
Dispose of used batteries according to the instructions • If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) www.acti.com... - Page 5 Indoor use. The device should be at least 2 meters away from the light, and at least 3 meters away from the window. • Outdoor use or use in environment exceeding the device temperature measurement will affect the temperature measurement accuracy. www.acti.com...
-
Page 6: Table Of Contents
Menu Page .................... 17 Menu Tree ..................... 17 User ......................19 Manage User ..................19 Add Face Picture .................. 20 Add Card ....................21 Access Control Settings (ACS) ..............21 Time & Attendance (T & A) ..............22 Communication Settings ............... 22 www.acti.com... - Page 7 Set Wiegand Parameters ..............23 Set ISUP Parameters ................23 Basic Settings ..................24 Biometric Parameters ................24 Data ....................... 26 Maintenance ..................27 Preference ..................... 27 Tips in Picture Taking ..........27 Positions When Taking or Authenticating Face ........28 www.acti.com...
-
Page 8: Introduction
USER’S MANUAL Introduction Package Content Micro-USB to USB Reader & Controller Wall Mount Wire Cable Converter Cable Quick Start Guide & Screw Pack Mounting Screws Wrench Mounting Template Mounting Template www.acti.com... -
Page 9: Physical Description
USER’S MANUAL Physical Description Item Item Cameras Ethernet Port Speaker Micro SIM Card Slot Touch Screen Tamper Key Card Sensor Cable Connector Debugging Port Micro USB Port (for service only) www.acti.com... -
Page 10: Wiring
Ground Yellow/Orange Alarm Input 2 Yellow/Purple Alarm Output Yellow/Brown Alarm Output Wiring Yellow/Red Yellow 485+ RS-485 Wiring RS-485 Blue 485- Black Ground Green Wiegand Wiring 0 Wiegand White Wiegand Wiring 1 Black Ground Door Lock White/Purple Lock Wiring (NC) www.acti.com... -
Page 11: Wiring Normal Device
USER’S MANUAL Group Color Label Description White/Yellow Common White/Red Lock Wiring (NO) Yellow/Green SEN (Sensor) Door Contact Black Ground Yellow/Gray BTN (Button) Exit Door Wiring Wiring Normal Device You can connec the terminal with normal peripherals. www.acti.com... -
Page 12: Installation
Wall Mounting 1. Based on the DATUM LINE of the supplied mounting template, attach the template to a flat surface or wall which is 1.4 meters off the ground. Drill the holes on the surface according to the template. www.acti.com... - Page 13 3. Route the cable through the cable hole of the mounting plate, and connect the corresponding external device cables. Align the device with the mounting plate and hang the device on the mounting plate. 4. Use the two (2) supplied screws to secure the device and the mounting plate. www.acti.com...
-
Page 14: Initial Setup
7. When prompted for access to a third-party platform, retain it as disabled and tap Next to continue. 8. Select the privacy settings according to your actual needs, then cilick Next. • Upload Pic. When Auth.: This function uploads the pictures captured when authetication to the platform automatically. www.acti.com... - Page 15 11. You can configure the face recognition or card access or both. Once either face or card has been configured, the system will go back to Add an Administrator first page. Repeat step 9 to add another access type or when all access has been configured, tap OK to complete setup. www.acti.com...
-
Page 16: Main Screen
1. Long tap the screen for 3 seconds and slide your finger left / right. 2. Authenticate the administrator’s face or swipe the card to enter the Main Menu page. 3. Once logged in, the Main Menu page appears. www.acti.com... -
Page 17: Menu Settings
Access Control Settings The Access Control Settings (ACS) menu allows you to (ACS) configure the authentication mode and card encryption to use, door access, etc. www.acti.com... - Page 18 It is not recommended to restore to default factory settings. Instead, contact your sales agents or the customer help desk for assistance. Preference The Preference menu allows you to customize the user interface by setting shortcut keys and selecting the interface theme. www.acti.com...
-
Page 19: User
2. Tap a username on the screen to enter the User Information page. 3. Tap an item to edit its content. 4. Tap to complete. Delete User 1. On the main menu page, tap User. 2. Tap a username on the screen to enter the User Information page. www.acti.com... -
Page 20: Add Face Picture
Add Person page, or tap an existing employee record. Fill in or edit the employee ID and credentials as needed. See Add User on page 19 for details. Tap Face, then position your face towards the circular recognition area. www.acti.com... -
Page 21: Add Card
Enable NFC Card: Enable to use NFC card for authentication. • Door Contact: Select “Open (Remain Open)” or “Close (Remain Closed)” according to your actual needs. By default, it si Close (Remain Closed)”. • Open Duration: Set the door unlocking duration. If the door is not opened for www.acti.com... -
Page 22: Time & Attendance (T & A)
Disabled DHCP to manually set the IP address, subnet mask, and gateway. NOTE: The device must be in the same network segment with the computer. 3. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server. www.acti.com... -
Page 23: Set Rs-485 Parameters
Set the ISUP server port number (ranging from 0 to 65535). Device ID Set the device serial number. ISUP Key Used this key for the device to communicate with other platforms via ISUP protocol. Set the ISUP key between 8 to 32 characters. www.acti.com... -
Page 24: Basic Settings
Set the matching security level when performing live face Level authentication. Recognition Set the valid distance between the user and the camera when Distance authenticating. Face Recognition The interval time between two continuous face rcognitions when Inteval (sec) authenticating. Allowable range from 1 to 10 seconds. www.acti.com... - Page 25 Hard Hat When enabled, the system will detect if the person is wearing a Detection hard hat and trigger notifications. Set the strategy as follows: • Reminder of Wearing: If the person does not wear a hard www.acti.com...
-
Page 26: Data
Data The Data menu allows you to import, export and delete user data on the device. For importing and exporting data, an external USB flash drive is required. On the main menu page, tap to access the Data page. www.acti.com... -
Page 27: Maintenance
On the main menu page, tap to access the Maintenance page. Preference The Preference menu allows you to customize shortcut keys and the device interface theme. On the main menu page, tap to access the Preference page. www.acti.com... -
Page 28: Tips In Picture Taking
• Do not wear hat, sunglasses and other accessories. • Do not allow hair to cover your eyes, ears, etc. • Do not use heavy makeup. Posture Face should be facing the camera. Size Positions When Taking or Authenticating Face www.acti.com... - Page 29 Copyright © 2021, ACTi Corporation All Rights Reserved 7F, No. 1, Alley 20, Lane 407, Sec. 2, Ti-Ding Blvd., Neihu District, Taipei, Taiwan 114, R.O.C. TEL : +886-2-2656-2588 FAX : +886-2-2656-2599 Email: sales@acti.com...
Need help?
Do you have a question about the R71CF-39 and is the answer not in the manual?
Questions and answers