Dell PowerEdge 21DXJ Installation Manual page 18

Figure 1-6. Removing the Front-Door Hinges
6
5
4
1 hinge pin
3 bottom hinge
5 retention clip
Remove the hinge spring from the hinge body.
c
Place the hinge pin, retention clip, and spring in a safe location.
d
Using the 4-mm Allen wrench, remove the Allen bolts that secure
e
the hinge body to the rack, and place the bolts with the hinge pin,
retention clip, and body spring.
Rotate the hinge body 180 degrees so that the hinge-pin holes are now
f
on the right side of the hinge body (see Figure 1-7).
16
Installation Guide
2 top hinge body
4 hinge post
6 body spring
1
2
3