Download Print this page

Mini Advanced Car Eye 3.0 Pro Instructions For Use Manual page 44

Hide thumbs Also See for Advanced Car Eye 3.0 Pro:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 27
Recording settings
Driving mode
Driving mode: Select either Continuous
recording or G-Sensor to be used in Driving
mode.
When changing the Driving mode
recording, the camera will be
formatted automatically. Please back
up all recordings before changing the
channel setting.
G-Sensor sensitivity: Select the desired
sensitivity for driving incidents.
Entry phase: Set the Entry phase time from
one to five minutes.
Exit phase: Set the Exit phase time from
one to five minutes.
Parking mode
Parking mode: Select a desired Parking
mode from Radar + G-Sensor, G-Sensor only
or OFF.
G-Sensor sensitivity: Select the desired
sensitivity for G-Sensor events in Parking
mode.
Radar Sensitivity: Select the desired
sensitivity for motion detection in Parking
mode.
Volume settings
Beep sound: Adjust volume for beep
sounds.
Voice guidance: Adjust volume for voice
guidance.
42
System settings
Language: Select the language of the voice
announcements.
Country/Region: Select the country/region
where the camera is used.
Date and time: Activate "Set date and
time zone automatically" or set time zone
manually.
Voice gender: Select the desired gender for
the voice announcements.
Voice recognition: Turn voice recognition
on or off and select the language.
Security LED: Turn the security LED on or
off (may be mandatory in some countries).
Overlays: Turn on or off. Date, time, speed
and GPS will be displayed in the recordings.
Speed unit: Select the desired unit for
speed.
GPS: Turn GPS on or off.
The GPS feature is not approved in
some countries for legal reasons,
so the feature may be restricted or
unavailable in certain countries.
Reset ACE:
Reset
Erase all recordings
Erase all recordings and settings
Wi-Fi frequency
The Advanced Car Eye 3.0 Pro device
uses a 5 GHz band to connect to the
smartphone, which provides faster
transmission rates than 2.4 GHz bands.
If the used smartphone does not support
5 GHz, the Wi-Fi frequency will change to
2.4 GHz.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Advanced Car Eye 3.0 Pro and is the answer not in the manual?

Subscribe to Our Youtube Channel