Figure 2-2. Power Cabling Example With Two Power Supplies in the PowerEdge
Systems and Two SPSs in the AX4-5i Storage Array
primary power supplies
on one AC power strip
(or on one AC PDU [not
shown])
NOTE:
This illustration is intended only to demonstrate the power
distribution of the components.
Cabling Your Cluster for Public and Private
Networks
The network adapters in the cluster nodes provide at least two network
connections for each node, as described in Table 2-1.
NOTE:
To configure Dell blade server modules in a Dell PowerEdge cluster, see the
Using Dell Blade Servers in a Dell PowerEdge High Availability Cluster document
located on the Dell Support website at support.dell.com.
SPS
Cabling Your Cluster Hardware
redundant power supplies
on one AC power strip (or
on one AC PDU [not
shown])
15