BAIC Senova X3 2019 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. BAIC Manuals
  4. Automobile
  5. Senova X3 2019
  6. Operating instructions manual
BAIC Senova X3 2019 Operating Instructions Manual

BAIC Senova X3 2019 Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Foreword
Thank you for selecting the model.
These Operating Instructions are applicable to Senova X3 vehicle. Before using the model for the first time, please carefully read these Operation
Instructions, and understand the structure, functions and use method of the vehicle as well as the relevant instructions given by the Company as
soon as possible. As for the losses caused by use of vehicle in violation of the instructions given in these Operating Instructions or caused by
retrofitting carried out without the consent from the Company, the user will be deprive of the right to lodge claim. The contents of these Operation
Instructions will help you master the correct methods to drive and maintain the vehicle, so that you can fully enjoy the driving pleasure.
These Operation Instructions aim to provide the user with the instructions on use and maintenance of vehicle. As for the configuration of your
vehicle, please refer to the purchase contract. If you have any question on the model and these Operation Instructions, please consult with the
authorized dealer of BAIC. The pictures, data and instructions given in these Operating Instructions meet the definition of product when these
Instructions are prepared. In consideration of the fact that the Company will continuously modifies and improves the vehicle, the pictures, data
and instructions given in these Operating Instructions are used to introduce the using method only, rather than serve as basis for acceptance
inspection for goods purchased.
The Company will continuously improve all vehicle models. Therefore, we reserve the right to modify any part of vehicle, equipment or technical
specification at any time. Please understand. All the data relating to delivery scope, appearance, performance, dimension, weight, fuel
consumption, specification and function of vehicle are correct as of the date on which these Operation Instructions are printed. It is likely that
some equipment/functions described herein are not mounted on your vehicle (For details, please consult with the authorized dealer of BAIC). No
information, figure or description in these Operation Instructions shall be deemed as legal commitment.
The Company declares in earnest that, it is fully responsible for amending these Operation Instructions, and reserves all rights and interests as
specified in the copyright law as well as the right to amend these Operation Instructions.
Without the written consent from the Company, any part of these Operation Instructions may not be reproduced, copied or translated, may not be
copied and stored in public searching system, and may not be distributed electronically, mechanically or as any other form.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Senova X3 2019 and is the answer not in the manual?

Questions and answers

Related Manuals for BAIC Senova X3 2019

Summary of Contents for BAIC Senova X3 2019

  • Page 1 If you have any question on the model and these Operation Instructions, please consult with the authorized dealer of BAIC. The pictures, data and instructions given in these Operating Instructions meet the definition of product when these Instructions are prepared.
  • Page 2 “Please carry out this operation” or “This operation is practicable”. And similar symbols, which are used to indicate a certain item in figure. And similar symbols, which indicate the moving or rotating direction. BAIC May 2019...
  • Page 3 Notices to Users 1. Before using the vehicle, please carefully 4. Check before driving: 7. Brake: ● Working of lamps on vehicle; ● When the engine is shut down, the read these Operating Instructions. When using vehicle, please follow ● Cleanliness of windshield and rear-view vacuum boosting device will not work, the operation methods given in these Operating force required to depress the brake pedal...
  • Page 4 11. Safety notices: coolant temperature) on instrument cluster of BAIC. The authorized dealer of BAIC has Please observe the following important lights up, please safely stop the vehicle as the necessary tools, diagnostic equipment,...
  • Page 5 General contents Instructions on safe operation Control systems and equipment Driving guide Maintenance and service Emergency treatment Technical data Maintenance information...

  • Page 6: Table Of Contents

    1. Instructions on safe operation Driving safety ............................7 Seat belt ..............................10 Correctly fasten the seat belt........................13 Seat belt inspection and maintenance ....................15 Maintenance and disposal of seat belt ..................... 15 Airbag system ............................16 Situations for airbag may not deploying ....................22 The collision at bottom of the vehicle ......................

  • Page 7: Driving Safety

    Operation Instructions. your reaction ability reduces, for example, dealer of BAIC by reference to the Be sure not to drive the vehicle under after taking medicine which will make provisions of the Information Table for...
  • Page 8 Correct sitting posture of driver and ● Adjust the backrest to the appropriate headrest as much as possible. ● Correctly fasten the seat belt. passengers angle, so that the back can fully match with Correct sitting posture of driver ● Two feet shall be placed in the foot the backrest.

  • Page 9: Pedal Area

    ● When the vehicle is running, be sure not Pedal area Vehicle model equipped with to place your feet on instrument board or automatic transmission* Vehicle model equipped with manual window or hunker on seat, but please transmission* always put your feet in the foot space; otherwise you may get injured easily in case of emergency braking or accident.

  • Page 10: Seat Belt

    Driver-side foot pad Seat Belt In order to reduce the injury/death risk in The foot pad shall be fixed in the footwell. All seats in the vehicle are equipped with case of accident, be sure to strictly comply After installation, please make sure that the three point type seat belt.
  • Page 11 1.Hold the lower sides of adjuster guiding replaced by the authorized dealer of BAIC, certain level, force limiter will block ①.
  • Page 12 passenger. As the speed and weight Consequence of driver and passengers The seat belt with pretensioning increase, the energy released in case of not fastening seat belt function can be used for once only. After the collision will increase. Many persons believe that in case of minor pretensioner is triggered, please replace the The vehicle speed plays the decisive role.

  • Page 13: Correctly Fasten The Seat Belt

    Even if the vehicle speed is very low, in case Locking of seat belt Correctly fasten the seat belt of frontal collision, the force applied to the Fasten the front seat belt human body will be very high, and it will be impossible for a passenger to support his body with hands.
  • Page 14 Adjustment of seat belt Unlocking of seat belt Fasten the rear seat belt The occupant can gently pull the seat belt The method to fasten rear seat belt is as You can unlock the seat belt by pressing and properly adjust the length of seat belt, same as that for front seat belt.

  • Page 15: Seat Belt Inspection And Maintenance

    The operation of pretensioning-type seat replace the whole seat belt assembly. belt retractor shall be carried out by the authorized dealer of BAIC; otherwise the pretensioner may not work normally in case of accident.

  • Page 16: Airbag System

    If the seat belt retractor is required by shall also be protected by appropriate child seat. any dealer which is not authorized by BAIC or any unprofessional personnel, or the seat The dust generated in the course of belt retractor is not used incorrectly in...
  • Page 17 Please get the system surface material of such components may inspected by the authorized dealer of BAIC get embrittled, and once the airbag is in time: triggered, the broken plastics may seriously ●...
  • Page 18 Under any of the following circumstances, please contact the authorized dealer of BAIC as soon as possible: ● The front airbag has been deployed. ● The front portion of vehicle is collided, but the front airbags are not deployed.
  • Page 19 BAIC as soon as possible: and collision point. In some lateral collisions, ● The any side airbag has been deployed.
  • Page 20 Side curtain airbag* The side curtain airbags ④ are located in longitudinal beam on both sides of vehicle roof. The pillar B and pillar C are marked with “AIRBAG”. When the vehicle is involved in lateral collision, the system may trigger the side curtain airbag on the side where the collision occurs.
  • Page 21 The side curtain airbag only provides please contact the authorized dealer of lateral collision, the inflated side curtain addition protection in case of serious lateral BAIC as soon as possible: airbag can effectively reduce the risk of collision, and can’t substitute the protection ●...

  • Page 22: Situations For Airbag May Not Deploying

    Seating position The rear end of vehicle is collided by Situations for airbag may not be In order to provide the optimal protection in following vehicle deployed case of serious collision, the side curtain The airbag provides the protection on airbag shall be deployed in very short time.
  • Page 23 Lateral collision Off-angle collision (angularity collision) When the side other than the passenger In case of lateral collision, the occupant will compartment is hit, the vehicle body is In case of off-angle collision, the impact be laterally displaced, so that the airbag weakly collided, and the forward airbag, energy received by airbag system may not inflated in front of the occupant could not...
  • Page 24 Rear-end collision Rollover accident Special collision In case of rear-end collision with large-sized In case the vehicle is collided with slender In case of rollover accident, the front airbag truck, the driver will carry out emergency object such as electrical post or tree, the may not be deployed.

  • Page 25: The Collision At Bottom Of The Vehicle

    Vehicle crossing the pit The collision at bottom of the vehicle If the vehicle is subjected to severe impact such as flying over a step, impacting a shoulder or a hard object, or crossing a deep pit, even if the deformation of the vehicle is slight, the vehicle component is affected by the rigidity, and the detected deceleration reaches the airbag deployment...

  • Page 26: Children Safety

    When the vehicle carries several children When the vehicle is running, no driver may Children safety There are ISOFIX child safety seat fixing hold an infant in his/her arms; otherwise the Don’t let a child stand or kneel on seat. devices on two rear-side seats, which can infant may be injured or killed in case of be used to fix up to 2 ISOFIX child safety...
  • Page 27 Classification of child seat (for The installation and use of child seat reference only) shall comply with the requirements of traffic 0/0+-group child seat: regulations and the instructions given by child seat manufacturer. There is a warning sign on the sun visor for front passenger, which reminds you to correctly install the child seat.
  • Page 28 I-group child seat: II-group child seat: III-group child seat: As for the infant or child whose age is under As for the child whose age is under 7 and As for the child whose age is over 7, weight 4 and weight is 9kg~18kg, it is advised to weight is 15kg~25kg, it is advised to use is 22kg~36kg, and height is less than 1.50m, use the I-group child seat which is equipped...
  • Page 29 ISOFIX child safety seat fixing device Correct installation of child seat There is 1 ISOFIX child safety seat fixing Before installing the child seat on rear seat, device on every rear side seat, and every please adjust front seat device is composed of 2 lower fixing anchor appropriate position in light of the size of bearers and 1 upper fixing anchor bearer.
  • Page 30 ISOFIX fixing positions for ISOFIX child seat Fixing position Weight group Size category Fixing module Rear seats on both Front passenger seat Rear middle seat side ISO/L1 IL** Portable bed ISO/L2 IL** Group 0:＜ 10kg ISO/R1 ISO/R1 Group 0+： ＜ 13kg ISO/R2 ISO/R3 ISO/R2...

  • Page 31: Safety Label

    These signs are used to remind the potential danger which may lead to serious injury. Please carefully read these signs. In case any sign comes off or is blurred, please get it replaced by the authorized dealer of BAIC in time.
  • Page 32 2. Control systems and equipment Layout of instruments and controllers (for vehicle model equipped with automatic transmission) ..... 34 Layout of instruments and controllers (for vehicle mode equipped with manual transmission) ....36 Instrument cluster（Pointer type） ......................38 Indicator and alarm light of instrument cluster（Pointer type） ..............51 Instrument Cluster (5-inch LCD) .......................
  • Page 33 Air conditioning control panel (not equipped with seat heating model) ............120 Air conditioning control panel (equipped with seat heating model) ............121 Navigation and multimedia sound system ....................126 Intelligent multimedia system* ........................126 Diagnostic interface ..........................127 Accessories, modification, microwave window ..................127...

  • Page 34: Layout Of Instruments And Controllers (For Vehicle Model Equipped With Automatic Transmission)

    Layout of instruments and controllers (for vehicle model equipped with automatic transmission) 1. Tweeter 2. Windshield-side defrosting/defogging air vent 3. A/C vent 4. Combined lighting switch 5. Cruise control setting button* 6. Instrument cluster 7. Audio system control button* 8. Combined wiper & washer switch 9.
  • Page 35 Layout of instruments and controllers (for vehicle model equipped with automatic transmission) 13. Hazard warning lamp switch 14. Multi-media control panel 15. A/C control panel 16.Gearshift handle 17. 12V power outlet 18. USB interface, 19. Accelerator pedal 20. Brake pedal 21.

  • Page 36: Layout Of Instruments And Controllers (For Vehicle Mode Equipped With Manual Transmission)

    Layout of instruments and controllers (for vehicle mode equipped with manual transmission) 1. Tweeter 2. Windshield-side defrosting/defogging air vent 3. A/C vent 4. Combined lighting switch 5. Cruise control setting button* 6. Instrument cluster 7.Audio system control button* 8. Combined wiper & washer switch 9.
  • Page 37 Layout of instruments and controllers (for vehicle mode equipped with manual transmission) 13. Hazard warning lamp switch 14. Multi-media control panel 15. A/C control panel 16. Gearshift handle 17. 12V power outlet 18. USB interface 19. Accelerator pedal 20. Brake pedal 21.

  • Page 38: Instrument Cluster（Pointer Type

    Instrument cluster（Pointer type） 1. Engine coolant temperature gauge 2. Engine tachometer 3. Speedometer 4. Fuel gauge 5. Trip computer display screen 6. "INFO" button 7. “RESET” button 8. Indicator lamps and warning lamps...
  • Page 39 The tachometer indicates the rotating speed conditions as soon as possible, contact with of engine, and the product of value indicated the authorized dealer of BAIC for inspection by indicating needle and 1000r/min is the and repair. engine speed.
  • Page 40 Getting higher gear engaged in time will Trip computer display screen help to save fuel and reduce the operating noise of engine. Fuel gauge When the fuel level is too low, the area “E” on fuel gauge will become red, and the The information displayed on display screen yellow fuel warning lamp will light up.
  • Page 41 Warning information In order to ensure the driving safety, please don’t view and confirm the trip information when the vehicle is running. Instrument operation button If any fault information is confirmed and stored under the menu “Fault Information”, When the ignition switch is turned on, if the ”...
  • Page 42 When the ignition switch is turned to the ② Gear information the downward arrow indicates engagement position “ON”, the logo of BAIC will be 12The current gear and transmission mode of a lower gear) displayed for 3 seconds, and then the trip ③...
  • Page 43 Trip A Trip B Instant fuel consumption Trip A is used to calculate the driving Just like trip A, the trip B is used to calculate instantaneous fuel consumption mileage during a time period, of which the the driving mileage during a time period, of displays the average fuel consumption of range 0.0km~9999.9km.
  • Page 44 Average fuel consumption Maintenance mileage Endurance mileage The displayed value of average fuel The maintenance information displayed is The endurance mileage that the vehicle can consumption is calculated on the basis of the mileage to be covered till next time cover is estimated and displayed on the the fuel used and mileage covered since when the vehicle should be maintained.
  • Page 45 Driving time Tire pressure When the estimated endurance mileage is The driving time shows the total driving time After entering the tire pressure interface, less than 30km, it will show "endurance since the last zero. The display range is you can check the tire pressure status. mileage low ".
  • Page 46 Instrument cluster setting After the battery power off, in addition to the time/ date to reset, the other Settings in the instrument cluster Settings will be automatically saved, do not need to reset. After entering the instrument cluster setting interface, if there is no operation after a certain period of time, the system will automatically return...
  • Page 47 2. Language 3. Time / Date 3.1 Display type After entering the language setting interface, After entering the time/date setting interface, After entering the display type setting press the INFO button to browse "Chinese", press the INFO button to browse through interface, press the INFO button to browse "English"...
  • Page 48 3.2 setting 4. display brightness 5. Fatigue driving reminder After entering the setting interface, press After entering brightness setting After entering the setting interface of fatigue the INFO button to browse "hour", "minute", interface of the display screen, press the driving reminder, press the INFO button to "month", "day", "year"...
  • Page 49 5.1 Normal model 5.2 High speed model When the continuous driving time accumulative to reach the set time of fatigue reminder, the prompt message "you have driven x h, please pay attention to rest" will appear on the driving computer screen, accompanied by sound reminder.
  • Page 50 6. Fault information 7. Restore factory value After entering the Resto factory value After entering the fault information interface, interface, press the RESET button for cyclic press the INFO button to browse the fault browsing. Select the RESET button and information in a loop.

  • Page 51: Indicator And Alarm Light Of Instrument Cluster（Pointer Type

    Indicator and alarm light of instrument cluster（Pointer type） 1 High beam indicator on 2 Parking brake indicator 3 Position lamp on indicator 4 Low beam on indicator 5 Left turn indicator 6 Oil pressure alarm lamp 7 ABS fault alarm lamp 8 Engine system fault warning light 9 Battery charging fault alarm lamp 10 Brake system fault/low brake level alarm...
  • Page 52 Indicator and alarm light of instrument cluster（Pointer type） 15 Fuel level alarm lamp 16 Engine immo indicator 17 Front passenger seat belt unfasten alarm light * 18 Anti-theft indicator 19 Tire pressure monitoring alarm lamp 20 Airbag system fault alarm light 21cruise open indicator light * 22 Door opening indicator 23 Transmission fault alarm light *...
  • Page 53 Indicator and alarm light description And contact Beijing auto dealership for 5. Left turn indicator (green) maintenance as soon as possible. If no 1. High beam open indicator (blue) Indicates that the left turn signal is in the action is taken, serious engine damage may Indicates that the high beam is on when the open state.
  • Page 54 Contact Beijing auto dealership ● 8. Engine system fault alarm light Should stop immediately under the maintenance as soon as possible. (yellow) safety of the conditions , and contact Beijing When the ignition switch is in the "ON" car dealership. If the warning light is on in the process position, the engine system fault warning 11.
  • Page 55 Operating the steering wheel at this time If the alarm light flashes, the fuel sensor is 14.ESP indicator (yellow) needs to use a lot of force, especially in the out of order and the indicator light on the When the ignition switch is in the "ON" sharp turn and low speed driving, should be fuel gauge is off.At this time, the display position, the alarm light will be ON for about...
  • Page 56 If the safety belt is not fastened, the alarm 19.Tire pressure monitoring and alarm light Indicates a faulty airbag system. The light will flash and be accompanied by a computer screen says "please check (yellow) beeping reminder. airbags". When the ignition switch is in the "ON" After 120s of beeping reminder, the beeping position, the alarm light will be ON for about If the alarm light on the fault of the...
  • Page 57 The door opening indicator will remain on If the speed is greater than 25km/h or the High temperature steam or other leaking until all doors are closed. driving time is more than 60 seconds or the working fluid may be a risk of scald. driving distance is more than 500m, the 23.

  • Page 58: Instrument Cluster (5-Inch Lcd)

    Instrument Cluster (5-inch LCD) 1 The vehicle speed gauge 2 Fuel gauge 3 IP display screen 4 Engine coolant thermometer 5 Engine tachometer 6 Indicator and alarm light...
  • Page 59 Vehicle speed gauge Fuel gauge The screen displays the message "please add fuel", at which time the vehicle can travel about 50km ~ 80km. Do not drive until the fuel tank is completely empty. Irregular fuel supply can lead to poor engine ignition and unburned fuel entering the exhaust, which can damage the catalytic converter! Engine speed gauge...
  • Page 60 Stop and shut down the engine as soon as IP display screen Do not let the engine speed stay long or possible in safe conditions and check the near the red area, otherwise easy to coolant level. If the coolant is sufficient or damage the engine.
  • Page 61 Instrument Cluster operation key The information of driving Trip A Menu recall, confirm, clear key ： When the ignition switch is in the "ON" Trip A can accumulate the mileage within a certain range, ranging from 0.0km to position, short press button under Interface switch and return key 9999.9km.
  • Page 62 TRIP B The average fuel consumption The instantaneous fuel consumption Average fuel consumption shows Instantaneous fuel consumption shows the Trip B can accumulate the mileage within a amount of fuel consumed per vehicle average fuel consumption of a vehicle at a certain range, ranging from 0.0km to mileage, which is L/100km.Displays the certain...
  • Page 63 Maintenance mileage Duration mileage Driving time Maintenance information shows Based on the current driving pattern and The driving time shows the total driving time distance from the next vehicle maintenance. fuel stock in the tank, the vehicle can be since the last zero. The display range is The first guaranteed mileage of the vehicle estimated and shown how far it can 0-99:59 hours.
  • Page 64 Tire pressure Setting 1. The language After entering the tire pressure interface, When the ignition switch is in the "ON" After entering the language setting interface, you can check the tire pressure status. position, Long press the menu button to press button to browse "Chinese"...
  • Page 65 2. Time/date 2.1 Display type 2.2 SETTING After entering the display type setting After entering setting interface, After entering the time date setting interface, press the button . press/button to browse "hour", interface, press the button to browse cycle through "time" and "date". Press "minute", "month", "day"...
  • Page 66 3. Display brightness 4. Fatigue driving reminder 4.1 Normal mode After entering setting interface of fatigue After entering brightness setting After entering the setting interface of normal driving reminder, press button interface of the display screen, short mode, short press button press the button to browse to browse "normal mode", "advanced mode",...
  • Page 67 4.2 Advanced mode 5. Tire pressure system After selecting initialization, the meter will After entering the setting interface of tire display "initialization in" for about 4 seconds, After entering the advanced mode setting pressure system, press ENTER button to and the meter will display "initialization interface, press button select.
  • Page 68 6. Restore factory value After entering the restore factory value interface, short press button for cyclic browsing, short press ENTER button for selection and return to menu interface.

  • Page 69: Instrument Cluster Indicator And Alarm Light (5-Inch Lcd)

    Instrument cluster indicator and alarm light (5-inch LCD) 1 EPS fault alarm lamp 2 ESP off indicator 3 ABS fault alarm lamp 4 ESP indicator 5 Left turn indicator 6 Parking brake indicator 7 Low Beam on indicator 8 High beam on indicator 9 Rear fog light on indicator 10 Position light on indicator 11 Battery charging fault alarm lamp...
  • Page 70 Instrument cluster indicator and alarm light (5-inch LCD) 16 Anti-theft indicator 17 Tires pressure monitoring and alarm lamp 18 Airbag system fault alarm light 19 Engine IMMO alarm lamp 20 Door opening indicator 21 Engine coolant high temperature alarm lamp 22 Lane departure indicator/fault light * 23 EPB fault alarm lamp 24 Front passenger seatbelt unfasten...
  • Page 71 Indicator and alarm light description ESP off indicator light is on. Press this If brake system failure/low brake level 1. Electric power steering fault alarm switch again, ESP function is on, ESP off alarm light is lit at the same time, stop the light (yellow) indicator light is off.
  • Page 72 If the indicator is flashing faster than normal, If no action is taken, the battery may lead to 8. High beam opening indicator (blue) the left turn signal is faulty or the bulb is serious loss of power, the engine will not Indicates that the high beam is in the open damaged.
  • Page 73 When the key is transferred to the "ON" 15. Transmission fault warning light If the warning light is on in the process position, the on-train computer screen will (yellow, automatic transmission only) of driving, stop the car immediately under prompt "illegal intrusion has been detected". When the ignition switch is in the "ON"...
  • Page 74 If the alarm light is not turned off after the 22. Lane departure indicator/fault light When the speed is greater than 5km/h, self-test or lit up during driving, the airbag (green/ red) * if the door is not closed, there will be a system is faulty.
  • Page 75 If the speed is greater than 25km/h or the Represents the fault of the braking system; 26. Fuel alarm light (yellow) driving time is more than 60 seconds or the If "please add brake fluid" is displayed, it When the ignition switch is in the "ON" driving distance is more than 500m, the means the brake liquid level is low.

  • Page 76: Steering Wheel

    The locking handle must be tightly pressed Steering wheel to prevent the position of the steering Adjust steering wheel position column from changing while the vehicle is moving. Multi-function steering wheel Release the adjustment locking handle of the steering wheel, adjust the position of the steering wheel up and down, so as to The driver can adjust the height of the facilitate the comfort and safety of people of...
  • Page 77 Constant speed cruise and instrument Sound system control buttons The horn cluster setting buttons * ：radio /bluetooth function switch key; Press the horn on the steering wheel ：cruise on or off to mark the area nearby, the horn will sound, ：mute button, hang up the phone;...

  • Page 78: Remote Key

    Remote key function Remote key Do not attach objects (such as metal The vehicle is equipped with a remote key film) that interfere with electromagnetic and a spare mechanical key. waves to the remote key)o It is normal that the effective range of Do not tap other objects with remote remote keys may be reduced due to the keys.
  • Page 79 Locking the door Here are some examples of locking when Unlock the door the door is not closed: ● when all doors are closed, but the engine hatch or trunk are not closed, press the lock button, all turn signals flash 3 times, the horn honks 3 times, all doors will still be locked.
  • Page 80 Open trunk Car seeking function * Replace the battery Press the button on the remote key, the indicator light of the remote key is not on, indicating that the key is low in power, and the battery should be replaced. The key may be damaged when replacing the battery.
  • Page 81 Waste batteries must be disposed of Mechanical keys according to local regulations. Replace remote key battery method 2.Remove the battery and wipe the battery 1 remote key (include folding machine key) installation tank clean; 2 Spare machine key 3.Replace the battery with a new one and When the remote key runs out of power or 1.
  • Page 82 Eject key Mechanical key locks and unlocks doors Anti-theft alarm system Your vehicle is equipped with a body Anti-theft system and an electronic engine Anti-theft system. For the safety and ease of operation of the vehicle, we strongly recommend that you read this instruction carefully in order to fully understand its features and usage.
  • Page 83 It is suggested that the vehicle has not The phenomenon triggered by alarm state ●all the turn signals flash and the horn entered the state of security alarm. At this time, you should check whether the engine goes off. cabin cover and trunk cover have been Anti - theft alarm state after the trigger to closed reliably.

  • Page 84: Central Door Lock System

    Even if the ignition switch is in the "LOCK" Open the door in the car Central door lock system position, the central door LOCK control Central door lock system description button remains in effect. The central door lock system locks and Unlock the door unlocks all doors: Press the left side of the button to unlock all...
  • Page 85 Automatic lockout function Thermal protection function of door lock Four doors and two covers left open When all doors are locked, after unlocking motor the door with the remote key, none of the If the door lock motor is driven to lock and four doors and two covers are opened within unlock the door for 7 consecutive times 30 seconds, and the central door lock will be...
  • Page 86 Four doors and two covers left open reminder (5-inch color instrument) The engine cabin cover and trunk cover are The engine cabin cover and trunk cover are not closed properly. not closed properly. The door is not closed, the computer screen Before driving, make sure that all the Before driving, please make sure that all shows the corresponding open door.

  • Page 87: Engine Hood

    Child safety lock After the child safety lock is locked, the door cannot be opened from the vehicle. When the rear door cannot be opened with the inside handle, the child safety lock may be working. Do not force the inside handle to avoid damage. Engine hood Open engine compartment bonnet 2.

  • Page 88: Trunk

    Close engine cabin cover Trunk 1. Check to make sure there is no other Points for attention foreign body in the engine compartment to Keep the trunk lid closed while driving. If prevent the damage of vehicle parts. the lid is opened, the luggage in the 2.
  • Page 89 Use the trunk control switch to unlock Close trunk When the whole car is unlocked, the trunk 1 .Grab the handle on the lid and pull it lid can be unlocked by pressing the trunk close to the rear bumper. control switch, and can be opened by pulling 2.

  • Page 90: Fuel Filler

    Do not add diesel fuel to the vehicle. If you add diesel fuel by mistake, do not start the engine. You should contact BAIC dealership to thoroughly clean the fuel system. When refueling fuel, slowly loosen the Fuel steam is easy to burn and cause refueling cap counterclockwise.

  • Page 91: Power Window

    poor engine ignition causes unburned fuel 4 Rear left window glass lift switch Power Windows to enter the exhaust, which causes the 5 Driver's window glass lift switch When closing the electric window, be Driver side window glass lifting control catalytic converter to overheat and damage.
  • Page 92 touch this switch and the window glass will Passenger side window glass lift When closing the window glass should remain in its current position. prohibited switch pay attention to prevent the window glass Driver to passenger side window glass from hurting others. lifting control In the car with children, when driving, should press the window lift ban switch, to...

  • Page 93: Panoramic Sunroof

    Panoramic sliding open/close sunroof glass slides forward Panoramic sunroof * automatically to close. During operation, Panoramic switch press the sunroof switch again and the sunroof glass will stop sliding. In the case that scuttle and scuttle shade close, press scuttle switch backward, can priority opens scuttle shade.
  • Page 94 temperature environment, Panoramic sunroof warps open/close shade switch forward, can close anti-clamping function of the sunroof may sunroof glass preferentially. not be activated, which may easily lead to Gently press the switch forward, accidents. same time, the sunroof glass does not have the function temperature will also cause damage to the of clamping during closing.
  • Page 95 Press shading curtain switch After hearing the "click" sound, the shading Panoramic skylight manual slightly and slightly short backward, curtain will perform the following operations initialization and self learning In some cases and the shade will slide back automatically successively: full open - full close; After this (such as sudden power failure of the battery to open.

  • Page 96: Headlight Position (Front)

    Headlight position (front) 1 low beam/high beam 2 Turning indicator 3 Side Turning indicator 4 Front position lamp/daytime running lights...

  • Page 97: Position Of Headlights (Rear)

    1 brake lamp(high) Position of headlights (rear) 2 Rear position light/brake light 3 Turning indicator 4 License plate lamp 5 Rear fog light/rear recovery reflector 6 Reverse light /rear recovery reflector When the rear fog light, brake light, turning indicator, position light and fault occur, when tine daytime driving light fails, the driving computer will display the prompt message of "light system failure".

  • Page 98: Light Combination Switch

    Equipped with automatic lighting Light combination switch Light control headlight model Not equipped to automatically light the Position light (small light) headlight model 1 Lighting control knob Turn the light control knob so that when the 2 Fog lamps control knob 1 Lighting control knob mark above the light control knob is aligned 3 Lighting control lever...
  • Page 99 The position light is not off Headlamps When the low beam is on, push the light When the ignition switch is in the "LOCK" When the ignition switch is in the "ON" control joystick outwards to light the high position, open the driver's side door. If the position, turn the light control knob so that beam, and pull the light control joystick position light or low beam is in the open...
  • Page 100 ● When the ignition is in the "ON" position, Turning Indicator when the vehicle parked in a dry Turn the light control knob to make the mark environment, turn off the engine, turn on the on the light control knob towards to position, lamp vapor will gradually volatilize, fog will When the light is low (such as at night or disappear on the...
  • Page 101 Change lane flashing turning indicator Fog lamps control Manual headlight height adjustment Gently move the light control joystick down When the position light or low beam light Headlight height is affected by the weight or up without crossing the limit point, and light is on: distribution of passengers and luggage the joystick will automatically return to its...
  • Page 102 Refer to the following example to select the Light delay shut off Back light brightness adjustment knob position Light delay off function also known as Number of accompany me home function, this function Position can provide users with delayed lighting drivers and Trunk load knob...

  • Page 103: Interior Lighting Lamps

    Danger warning lamp 3.In case of emergency. Interior lighting lamps 4.When towing another vehicle or being Front reading lamp * towed. Equipped with panoramic sunroof model When the danger alarm light switch is pressed down, all the turning indicator lights will flash at the same time, and the two lights in the combination instrument will also flash at the same time.
  • Page 104 Not equipped with panoramic sunroof model Door open light function Rear reading light * Press the switch to open the door and light up When the ignition switch is in the "ON" position, open any door and the front reading light will come ON. After all doors are closed, the front reading light will turn off gradually.

  • Page 105: Wiper Combination Switch

    Trunk light Wiper/scrubber can only work when ignition Wiper combination switch switch is in "ON" position. If you want to Rain sensor not equipped choose the block, push up or push down the control lever can: 1 MIST: when the wiper lever is moved to "MIST "release ,the...
  • Page 106 In winter, remove snow and ice from wiper arms and wiper blades, including areas where wipers work. Equipped with rain sensor model Turn the intermittent time adjustment knob 7 Rear wiper knob switch: when the rear to adjust the system intermittent brush time. wiper knob switch is turned upward to the The intermission time is divided into four "ON"...
  • Page 107 7 Rear wiper and washing control knob Rain/light sensor * When the system senses rain, the ignition switch is in the "ON" position and the wiper switch hits "AUTO", wiper will automatically open the windshield wiper and change the wiper speed according to the amount of rain.

  • Page 108: Interior Rearview Mirror

    Wash the front windshield Wash the rear window Release, wiper control knob automatically turn back When the scrubber stops spraying the rear wiper will continue to scrape few times When the trunk lid is open, the rear wiper will not work. Close the trunk cover for 5 seconds after performing the current action of the rear wiper.

  • Page 109: External Rearview Mirror

    Select the rearview mirror to be adjusted External rearview mirror （ Left and turn the adjusting knob to The rearview mirror outside the car has the （right rear-view rearview mirror）or function of electric regulation. mirror）position。 The rear-view mirror outside the car Operate the adjusting knob forward or reflects a smaller image of the object than it backward to adjust the upturn or downturn...

  • Page 110: Sun Visor

    The rear-view mirror outside the car is Flip the visor sideways Sun visor folded manually Flip the visor down Turn down the visor, then release the hinge Pull the outside rear-view mirror back by on the right side of the visor from the clasp, The driver side visor and the front hand to fold it over the side of the vehicle.

  • Page 111: Seats

    Seat front and rear adjustment Seats Do not place objects under the manually Proper seat adjustment ensures full adjusted seat, or these objects may protection of the seat belt and airbag accidentally push the seat adjustment lever system. upward, and the seat will suddenly move After the seat position has been and cause the vehicle to lose control in driving.
  • Page 112 Front seat heating function * Backrest inclination adjustment: Seat cushion up and down adjustment * : Pull up the adjusting handle and shake the Driver's seat heating button Lift the seat cushion by lifting the adjusting back of the seat to an appropriate inclination Front passenger seat heating button handle upward;...
  • Page 113 The front passenger seat heating operation Folding method The rear seat is the same as the driver side seat heating Back seat folding operation. If you need to place large items in the car, Seat heating gear display you can fold the back of the back seat to Gears information instructions increase the luggage storage space.
  • Page 114 Fold back Pull up the outer lock button of the left seat When the backrest of the rear seat is all back and turn the back forward to fold the folded, the storage space in the car can be First move the seat belt to the outside and seat back for two.

  • Page 115: Storage Device

    Seat headrest adjustment Storage device It is strictly forbidden to tear down the To ensure safety and comfort, please adjust headrest and drive, otherwise serious It is forbidden to put inflammable and the headrest to the proper position before injuries will be caused when an accident explosive articles in the car.
  • Page 116 A storage box on the interior panel of the Glove box Storage driver's side door Pull the handle to open the glove box and There is a storage under the control panel of The storage box on the interior panel of the push the glove box cover up to close the the air conditioner, which can be used for driver's side door can be used to store items...
  • Page 117 Front central handrail storage box Luggage storage tank There is a storage tank at the rear of the shift handle, which can be used for storing Lift the front part of the central armrest goods. upward to open the cover of the storage box. Press down to close the lid.
  • Page 118 Store content chamfer to set in suitcase left 12V power outlet, USB interface Cigarette lighters can only be used to light and right sides, can put some light, soft cigarettes, cigars or similar items. article. ! Never leave children alone in a car. With Roof rack the ignition switch on, children may misuse the lighter and cause burns or fire accidents.

  • Page 119: Vehicle Air Conditioning System

    Vehicle air conditioning system Do not leave children alone in the car. The air inlet of the air conditioner should Vehicle air conditioning system is the Children may misuse sockets and connect be kept clean and unimpeded under the air realization of the interior air cooling, electrical equipment to them when the start/ window to ensure the normal air intake of...

  • Page 120: Air Conditioning Control Panel (Not Equipped With Seat Heating Model)

    Air conditioning control panel (not equipped with seat heating model) 1 Air conditioning menu button 2 AC on/off button 3 Maximum AC key 4 Blowing mode button 5 Foot defrosting mode button 6 Face and foot mode 7 Air conditioning internal and external circulation switch button 8 Air conditioner outer circulation switch button...

  • Page 121: Air Conditioning Control Panel (Equipped With Seat Heating Model)

    Air conditioning control panel (equipped with seat heating model) 1 Driver seat heating button * 2 AC on/off button 3 Maximum AC key 4 Blowing mode button 5 Foot defrosting mode button 6 Face and foot mode 7 Air conditioning internal and external circulation switch button 8 Passenger seat heating button * 9 Rear wind window defrost/mist button...
  • Page 122 Air conditioning interface display 7. Switch the circulation button in the air 2. AC ON/OFF button When the air conditioning system is on, conditioner Press AC ON/OFF button information about the air conditioning will be Press the switch button of air conditioner indicator light on the key is on, the displayed on the multimedia display screen.
  • Page 123 Only when the engine is running can the Different flow patterns Press the foot mode button rear wind window defrosting/mist removal The air blows towards the feet function work. 14. The wind temperature and buttons This feature is designed to reduce moisture, Press the air temperature and the key to fog, and frost on the rear wind panes to increase the temperature.
  • Page 124 ：Airflow blows to the lower part of the The air blows to the upper and lower Air blowing wind window glass and the parts of the body. body. lower part of the body forward. In this mode, other air outlets have a In this mode, other air outlets have a In this mode, other air outlets have a small...
  • Page 125 Air conditioning air filter Central air outlet The A / C air filter is installed in the A / C filter element housing under the ventilation trim panel on the right side of the instrument panel, which can be seen after removing the glove box.

  • Page 126: Navigation And Multimedia Sound System

    Air outlets on both sides Navigation multimedia Intelligent multimedia system* sound system Adjust the air outlets on both sides of the Some models are equipped with intelligent instrument panel up, down, left and right to multimedia system. Please refer to the The vehicle is equipped with navigation change the wind direction.

  • Page 127: Diagnostic Interface

    Before installing accessories or replacing Modifications to the front of the vehicle spare parts, please contact BAIC special dealer. It is recommended that you always may Impact the pedestrian protection of the use accessories and parts approved by our vehicle.
  • Page 128 It will cause heating and short circuit of Microwave window Model 2 * harness due to excessive load, which may Model 1* cause fire. Wiring harness cannot be changed casually when installing dash cam, navigation and DVD player 1 Microwave window 1 Micro wave window 2 electric signal 2 electric signal...
  • Page 129 3. Driving guide New car running in ..........................130 Precautions before driving ........................131 Ignition switch ............................131 Transmission ............................133 Parking safety precautions ........................138 Parking method ............................139 Electric power steering system ......................... 140 Braking System ............................141 Cruise control* ............................

  • Page 130: New Car Running In

    ●avoid high-speed operation of the engine New car running in new tyres and brake friction blocks that and do not exceed 80% of the maximum Running in precautions have not been run in have not reached the speed. In order to improve the service life of the best adhesion and friction, so they must be ●do not tow other vehicles.

  • Page 131: Precautions Before Driving

    Precautions before driving Ignition switch When it is necessary to turn the key Pay attention to the following points before from "ACC" position to "lock" position, press driving: and hold the key slightly inward before ●make sure all windows, exterior mirrors turning the key to "lock"...
  • Page 132 Automatic transmission models When the engine is running, it is When the battery is low enough to start ●press the brake pedal to the bottom and forbidden for the driver to leave the vehicle the engine, try to start the engine through hold it;...

  • Page 133: Transmission

    3. When parking, press the brake pedal, Transmission The cooling fan may still be running for stop the vehicle, pull up the parking brake AT Transmission models * some time after the engine is off. When button, and place the shift handle in the "P" Vehicle start and stop working in the engine compartment at this position.
  • Page 134 When shifting from "P" to "R", the brake This gear is a low speed gear. According to Sports model pedal must be pressed and the locking the vehicle speed and accelerator pedal button in front of the shift handle must be position, the transmission will automatically pressed.
  • Page 135 CVT Model * When shifting from "P" to "R", the brake Do not put the gear in driving gear when Vehicle start and stop pedal must be pressed and the locking the engine is running, but press the brake button in front of the shift handle must be pedal to keep the vehicle stationary for a pressed.
  • Page 136 "M" gear (manual mode) Sports model * "N gear is strictly prohibited to slide When the shift lever is in the "d" position, during driving, otherwise the transmission pull the shift lever to the left to the "s" will be seriously damaged or even cause position, and then the transmission enters accidents.
  • Page 137 Manual transmission models * Gear description (5MT) When downshifting at high speed, do 1-5" gear (forward gear): not cross multiple downshifts, otherwise the In upshift, shift from low gear to high gear in engine speed will rise sharply, causing turn. When downshifting, shift from high damage engine, clutch...

  • Page 138: Parking Safety Precautions

    Shift on reserve gear 1. Stop the vehicle stably. Parking safety precautions 2. Depress the clutch pedal for about 2 Do not park the vehicle near the seconds, and place the shift handle in "R" inflammable and explosive articles to avoid (equipped with 6mt model, when engaging r fire.

  • Page 139: Parking Method

    Parking method 1. Park the vehicle stably, apply the electric parking brake, and confirm that the parking brake is reliable. 2. For the automatic transmission model, place the shift handle in the "P" position; for the manual transmission model, place the shift handle in the appropriate position according to the safety requirements of the parking position (flat: neutral;...

  • Page 140: Electric Power Steering System

    Please contact the authorized speed and speed of steering wheel rotation dealer of BAIC to check the electric power during vehicle steering, so as to reduce the steering system. disturbance to steering system caused by uneven road surface.

  • Page 141: Braking System

    If the EPS self-learning is not the effect, press the brake pedal moderately, 6. Electronic stability system (ESP) can special dealer of BAIC for of EPS corner and feel whether the braking is normal. If improve the driving stability of the vehicle.
  • Page 142 from other vehicles to ensure enough Road for sprinkling salt: when driving on the ensure braking efficiency response time and braking distance in case road for sprinkling salt, if the brake is not controlling the brake pedal force. of emergency braking. used for a long time, there will be salt layer 5.
  • Page 143 At this braking, driving to the nearest special dealer dealer of BAIC for maintenance at a low time, it is necessary to pull over the side of of BAIC at low speed.
  • Page 144 When the vehicle stops stably and the Automatic release of electric park brake: Make sure that the driver's seat belt is ignition switch is in the "on" position, pull up When the vehicle is started, all doors are fastened, otherwise the electric parking the electric parking brake switch to apply the closed and the driver's safety belt is brake will not release automatically.
  • Page 145 At this time, drive to the nearest pedal, otherwise ABS will stop working and When the brake priority function is activated, special dealer of BAIC for maintenance at a may increase the braking distance. the engine will immediately return to the idle low speed.
  • Page 146 Every time the engine is started, the ESP is in fault, and the vehicle shall drive to the function will automatically start. nearest special dealer of BAIC maintenance Press the ESP off button to turn off the ESP at a low speed.

  • Page 147: Cruise Control

    2Control the vehicle speed to the desired Cruise control* The set cruising speed and distance cruise speed (40km/h - 130km/h ) General description from the vehicle in front must adapt to the Vehicle cruise control system is a kind of traffic conditions at that time.
  • Page 148 Reduce cruise speed Increase cruise speed Suspend cruise speed In the constant speed cruise state, push Under the constant speed cruise state, In cruise control mode, if any of the down the cruise speed setting key to reduce move the cruise speed setting key + res following conditions occurs, cruise control the cruise speed.

  • Page 149: Tire Pressure Monitoring System

    Resume cruising Close cruising Tire pressure monitoring system The indirect tire pressure monitoring system is adopted in this vehicle. It uses the wheel speed and other signals received by ESP to indirectly monitor whether the tire pressure is normal, and displays the alarm through driving computer display screen.

  • Page 150: Parking Radar System

    (including but not limited to the above) the second section, the third section and the special dealer of BAIC immediately. Refer to "tire pressure system" for tire fourth section, which correspond to the red, pressure initialization operation.
  • Page 151 Among them, the second, third and fourth Parking radar system fault alarm segments are the early warning areas, and description the combination instrument buzzer will give Radar fault alert intermittent beeps of different frequencies to remind the distance of obstacles; the first segment is the long beep warning, and the combination instrument buzzer will give continuous beeps.
  • Page 152 Rear Park radar system inoperative The sensor may not recognize the following If there are water drops attached to the The park radar system does not normally 1. Thin or slender objects such as cables, surface of the ultrasonic sensor, the chains, thin columns and piles.

  • Page 153: Rear View System

    Rear view system * When backing up, slow down and The car is equipped with a reversing camera observe the surrounding environment. Do on the trunk lid. The rear view system uses not take it lightly because the vehicle has a this camera to take the image of the rear of rear-view the vehicle and transmit it to the multimedia...
  • Page 154 Reversing camera Reverse image system fault description When backing up, make sure the trunk When the reversing image is turned on, if lid is closed. the system detects the fault information, the Do not cover anything on the rear view multimedia display screen displays the fault prompt interface, which is shown as follows.

  • Page 155: Panoramic Imaging System (Avm)

    Conditions affecting the rear view effect Panoramic imaging system of reversing (AVM)* Panoramic image system is a comfort system, which consists of four wide- angle cameras and a panoramic system controller. Panoramic system can help the driver to know the surrounding environment of the vehicle at a glance when reversing, parking or turning, so as to expand the driver's field of vision and assist the driver in driving.
  • Page 156 ●Perspective switching Panoramic image system switch Opening conditions of panoramic image Press the on key to turn on the panoramic system In the panoramic image view, when clicking image system. Press the on key again to When the ignition switch is in the "on" the button around the panoramic car, the turn off the panoramic image system when position, it can be turned on if any of the...
  • Page 157 When entering through open condition 2 or 3, it cannot be closed through close condition 1 Panoramic image system interface switching operation When you click the setting button, the When the system is started, the default panoramic image interface will display the screen of the system is front view + setting menu.

  • Page 158: Mod Moving Object Recognition

    MOD moving object recognition When it is in the night, rain, snow, fog, shadow other environments, this When vehicle stationary, function will give false and missed reports. panoramic image system can recognize the Please drive carefully. moving objects in the camera image. When LDW Lane Departure Warning the system detects the moving objects in the System *...
  • Page 159 Open and close Alarm model ●Lane lines are red when lane lines are The system can provide icon visual alarm identified and vehicles deviate. and continuous audible alarm. Lane departure warning settings T he user can configure the alarm mode and alarm sensitivity of LDW in the host interface.

  • Page 160: Driving Skills

    Make sure that no nuts are missing or loose. Brake pedal: When the camera is covered by rain, Automotive lighting: Check that the pedal has enough free travel. snow, mud, ice and snow, there will be false After engine start Before driving Fluid Make sure that the headlights, brake lights, alarms and false alarms.
  • Page 161 Driving essentials in different situation Please pay attention to the following items if When driving on a slippery road, Drive in the rain you need to pass the road section with emergency braking, acceleration ponding: steering may cause tire skidding, reduce ●before wading, the wading depth and the vehicle handling, and cause accidents.
  • Page 162 2. Do not forcibly open the frozen windows When winter comes, please go to the or move the frozen windshield wipers. Use special dealer of BAIC for winter protection warm water to melt the frozen parts. Wipe off the water immediately to prevent and maintenance freezing.
  • Page 163 when parking on steep slopes, the parking Keep a proper distance from other vehicles Efficient use of vehicles brake button must be pulled up to apply the when driving to avoid emergency braking, ●maintain correct tire pressure. Insufficient parking brake which will also reduce brake wear.
  • Page 164 ● start smoothly and try to avoid rapid BAIC for help. acceleration and deceleration. Make sure the parking brake is released ●drive slowly for a few minutes after the before driving.
  • Page 165 4. Maintenance and Service Maintenance overview ..........................166 Regular maintenance ..........................166 Routine maintenance ..........................166 Engine compartment layout（China V) ....................169 Engine compartment layout（China VI) ....................170 Safety instructions for working in engine compartment ................171 Engine coolant ............................172 Engine oil ..............................

  • Page 166: Maintenance Overview

    BAIC, and the routine people flow, inflammable and explosive This is necessary if the vehicle is to be able maintenance shall be mainly carried out by danger or on the ramp.
  • Page 167 (see "tires and wheels") Under the condition that the engine is shut down, the pressure in fuel pipeline is still very high. Be sure not to dismantle fuel pipeline, please get the fuel system repaired by the authorized dealer of BAIC.
  • Page 168 Clutch pedal* Windscreen defroster/mist remover Engine oil Check whether the pedal is normal, ensure When operating the air conditioning system, Park on a flat, solid ground, turn off the engine, and after 10 minutes, check the oil that the pedal operation is not stuck and check that air can be properly and uneven force, ensure that the floor mat do adequately blown out of the outlet of the...

  • Page 169: Engine Compartment Layout（China V)

    Engine compartment layout（China V) 1 Windshield washing liquid tank cap 2 Engine oil dipstick 3 Engine oil filling cap 4 Battery maintenance cover 5 Brake liquid tank filling cap 6 Fuse box 7 Air filter 8 Engine coolant tank filling cap...

  • Page 170: Engine Compartment Layout（China Vi)

    Engine compartment layout（China VI) 1 Windshield washing liquid tank cap 2 Engine oil dipstick 3 Engine oil filling cap 4 Battery maintenance cover 5 Brake liquid tank filling cap 6 Fuse box 7 Air filter 8 Engine coolant tank filling cap...

  • Page 171: Safety Instructions For Working In Engine Compartment

    Please transfer all vehicle with the jack assembly only, beware may turn on automatically when the engine operations to BAIC dealership. Improper of causing injury to the operator under the is out. work can lead to injury.

  • Page 172: Engine Coolant

    Coolant level check Equip A151R1 engine model Engine coolant Equip A151 engine model The cooling fluid can prevent corrosion, cavitation corrosion and leakage, radiator boiling, scale and freezing, etc., which can make the cooling system always in the best working state and ensure the normal working temperature of the engine.

  • Page 173: Engine Oil

    Refer to the provisions in the 《maintenance is found missing, open the filling cap of the of engine coolant, please go to BAIC information table 》 to replace engine oil coolant tank and add the coolant between dealership for replacement.
  • Page 174 Recommended SAE viscosity for engine oil 3. Turn off the engine and wait for at least Oil pressure indicator (red) 10 minutes to let the engine oil flow back If the engine oil pressure alarm lamp into the oil pan. continues to light up after the engine starts, 4.
  • Page 175 When long distance driving in summer or (it takes several minutes for the oil to flow Please go to BAIC dealership to change the driving in mountain zone, in this harsh from the filling port to the oil pan).

  • Page 176: Brake Fluid

    It is suggested that medical advice. In winter or cold areas, it should be the car should be recycled by BAIC Be careful not to splash brake fluid on dealership. replaced with a stronger antifreezing ability the hot engine, it may cause a fire.
  • Page 177 If the liquid provisions of the <maintenance information level drops obviously within a short time, it table>.Please go to dealership for brake indicates that the brake system has leakage fluid replacement. phenomenon, please contact BAIC dealership for maintenance as soon as possible.

  • Page 178: Battery

    Before long-distance traveling or after use of produce explosive mixture the battery for more than one year, you of gases! should go to BAIC dealer to check battery Do not allow flames or sparks to near power. the battery. Do not make the battery terminal short circuit, or the high-energy spark generated by short circuit may hurt the operator.
  • Page 179 1 year, you should check at normal temperature. Therefore, before Replace Battery battery power in BAIC dealer. If you need winter, you’d better go to BAIC dealer for Before the operation, be sure to carefully start engine by using the battery of another...

  • Page 180: Windshield Washing Fluid

    It is recommended to using windshield washer, the washer nozzle windshield washing fluid, avoid scraping in go to BAIC dealer for replacement of battery can only spray washing fluid intermittently, dry state. Otherwise, it will damage the...

  • Page 181: Washer Nozzles, Wipers

    If the situation is not improved small or the injection position is not correct, If the weather is cold, you should check please go to BAIC dealer to repair. whether the wiper blades are frozen every time you turn on the front windshield washer.
  • Page 182 ●The positioning angle of the wiper arm is on the window glass, until install wiper blade; back. To avoid damage to the window glass and not correct. In such case, please get the wipers. angle inspected and adjusted by BAIC dealer .
  • Page 183 2. Rotate the wiper , with the wiper arm 90 ° 4. Replace new wiper blade. 6. Pull up the wiper blade along the arrow Angle. 5. Push up the wiper blade and clip into the direction , the ' 'click" sound installed in 3.
  • Page 184 Rear window wiper replacement method 3. Oblique upward pull wiper. 4. Replace new wiper blade. 5. Clip the convex A into the groove B on the 1. Lift up the wiper arm from windshield. After removing the wiper blade, you wiper arm.

  • Page 185: Inspect Tire And Wheels

    You should go to the authorized dealer of BAIC for tire inspection as soon as 6. Clockwise rotation the wiper blade, clip possible at this time.
  • Page 186 You should always check the condition of You should only check the tire pressure Tire pressure inspection with pressure the rim. If the rim distorts, deforms, cracks, when the tire is cold. Cold tire means the You can check tire pressure with a tire severe corrode or scratches, it should be vehicle is not driven at least for three hours gauge when the tire is cold.
  • Page 187 If one tire is worn unevenly or the specified value. After traveling 1000km, Valve cap can prevent dust and moisture check the wheel bolts tightening situation excessively, you should go to the BAIC from entering into he tire valve. again. dealer for wheel alignment.

  • Page 188: Tire Selection And Replacement

    (including the spare tire) operation, thus affecting vehicle stability. is over 6 years. Therefore, you should regularly check the vehicle BAIC dealership for wheel balancing Don’t use any used wheel or used tire of inspection. which the source is unknown, because...

  • Page 189: Accidental Burst Handling

    Accidental burst handling Even if the tire is not used, it will age The vehicle can not run over the The type vehicle equip tubeless tires, tire with the time. No matter how much the tire maximum permissible on the winter tires burst is uncommon in normal driving, if tread remains, the tire should be replaced speed.

  • Page 190: Replacement Of Rim

    Do not install tire chains without the are all toxic and flammable, and can easily those of the original wheels. The new rim approval by BAIC. Improper snow chains lead to fires and explosions! should also be mounted identically as the...
  • Page 191 When clean vehicles Manual clean vehicles In the following cases, you should clean the When cleaning vehicles, pay attention vehicle to protect the body paint: to the following: ● After traveling in rain, acidic rain may ●Do not use hot water, do not in direct cause damage to the paint surface.

  • Page 192: Clean The Inside Of The Vehicle

    Thoroughly clean the vehicle before corrosion may cause leakage or damage to conditions. If necessary, please contact the the tire edge. waxing. BAIC dealer for repairs. ● Timely remove stone tablets Do not use wax containing abrasives,...

  • Page 193: Anti-Corrosion Measures

    ● Check vehicle After cleaning, the seat belt webbing should authorized BAIC dealer . accumulation of sand, dirt, or salt, and wash be completely dry before use. You should Most common...

  • Page 194: Recycling And Environmental Protection

    Plastic and rubber parts according to the Scrap or damaged parts current regulations as marked. In order to Don't throw away, BAIC dealer will take facilitate recovery, the range of materials measures with recycling and protecting used has limitations: most plastics are environment.
  • Page 195 5. Emergency treatment Warning triangle ............................. 196 Tool kit ..............................197 Replacement fuse ............................ 202 Fuse box in engine compartment（Chinese V） ..................205 Instrument panel fuse box（Chinese V） ....................207 Fuse box in engine compartment（Chinese VI） ..................209 Instrument panel fuse box（Chinese VI） ....................211 Replacement of light bulb .........................

  • Page 196: Warning Triangle

    Open and place the warning triangle The distance of warning triangle Warning triangle Warning triangle location Open two flange of warning triangle1 and 2, Road Highway lock the top of the mouth. Pull open four Distance L 50-1 00 m ^ 150m Warning triangle is sticked on the left carpet stents3 at the bottom, placed behind the...

  • Page 197: Tool Kit

    Tool kit Reflective vest The reflective Vest is in the glove box , when the driver or company used at night or low visibility to process the vehicle failure, to enhance the recognition of outside the car. Open the vehicle tool kit, tools that can be used are as follows: The tool kit is in the spare wheel rim, you 1 Wheel dismantling wrench...

  • Page 198: Spare Tire

    ● The jack may only be used for Spare tire replacement of wheel. The jack may not be used to lift up any other heavy article or vehicle. ●Please only use the jack on hard and flat ground. ●When using the jack, don’t start up the engine, otherwise accident may occur.
  • Page 199 Preparatory work ●Shut down the engine, and do not start If the tire burst, puncture, bulge, leakage, the engine during vehicle lifting process. and other phenomena exist, you should ●Do not allow any person to leave in the drive slowly to a flat place where safe vehicle.
  • Page 200 3.Rotate the jack screw so that jack head Do not remove the wheel mounting bolts notch blocks the body supporting point, but before the wheel leaves the ground. do not jack up the vehicle. 4. Place the spare wheel below the wheel on side of the wheel with fault, in order to play a role in safety precautions.
  • Page 201 Do not place a pad above or below the Spare wheel is only used in emergency jack. situations, so you should drive carefully at speed less 80km/h when spare wheel is Do not use any jack not equipped with used, and avoid sharp acceleration and the vehicle.

  • Page 202: Replacement Fuse

    Replacement fuse Tighten the wheel bolts with the wheel Engine compartment fuse box bolt dismantling wrench provided with the vehicle, but you cannot confirm the torque. Reasonably control the traveling speed, avoid sharp acceleration and emergency braking, and go to the authorized dealer of BAlC as soon as possible to check and ensure predetermined...
  • Page 203 Instrument panel fuse box check whether electrical equipments can work properly. If the fault persists, please contact the BAIC dealer for repair. Unplug the fuse corresponding to the The instrument panel fuse box is located in electrical equipment not working and check...
  • Page 204 If you replace the blown fuse with a spare fuse with lower amperage and the fault is eliminated, you should also replace it with fuse of the correct rating as soon as possible. If there is no spare fuse can be replaced with and the vehicle cannot move, you can remove a fuse with equal or lower amperage from other circuit.

  • Page 205: Fuse Box In Engine Compartment（Chinese V

    Specification and function of Fuse box in engine compartment（Chinese V） engine compartment fuse Number Specifications Protective Circuit EF01 150A Generator EF02 Start power supply EF03 High-speed fan EF04 Blower Electrical Park Brake EF07 - right EF08 EF10 20 A Low-speed fan EF11 Horn EF12...
  • Page 206 Number Specifications Protective Circuit Forbidden to use other materials EF31 BREAK switch replace the fuse, in order to avoid damage EF32 Left low beam light the vehicle, even may cause fire or casualty. EF36 Right low beam light An improper fuse may cause a fire or Starting feedback casualties.

  • Page 207: Instrument Panel Fuse Box（Chinese V

    Specification and function of Instrument panel fuse box（Chinese V） instrument panel fuse Number Specifications Protective Circuit Left front/ right rear RF01 window Right front/ left rear RF02 window RF03 Power lock RF05 Horn power RF06 RF07 RF08 EMS start request RF12 RF13 RF14...
  • Page 208 Number Specifications Protective Circuit RF29 7.5A Anti-theft alarm coil RF32 Instrument RF34 Rear window heating Daytime running RF35 7.5A lights RF36 7.5A Rear fog lamp RF38 Rear wiper RF39 Rear washer RF42 A/C feedback RF47 Airbag Rear window heating RRY01 relay RRY03 Rear fog lamp relay...

  • Page 209: Fuse Box In Engine Compartment（Chinese Vi

    Specification and function of Fuse box in engine compartment（Chinese VI） engine compartment fuse Number Specifications Protective Circuit EF01 150A Generator EF02 Start power supply EF03 High-speed fan EF04 Blower Electrical Park Brake EF07 - right EF08 EF10 20 A Low-speed fan EF11 Horn EF12...
  • Page 210 Number Specifications Protective Circuit Forbidden to use other materials EF27 High beam light replace the fuse, in order to avoid damage EF31 BREAK switch the vehicle, even may cause fire or casualty. EF32 Left low beam light An improper fuse may cause a fire or EF36 Right low beam light casualties.

  • Page 211: Instrument Panel Fuse Box（Chinese Vi

    Specification and function of Instrument panel fuse box（Chinese VI） instrument panel fuse Number Specifications Protective Circuit Left front/ right rear RF01 25 A windows right front/ left rear RF02 window RF03 20 A Power lock RF05 Horn power RF06 30 A RF07 20 A RF08...
  • Page 212 Number Specifications Protective Circuit Forbidden to use other materials RF28 7.5A Trunk lamp replace the fuse, in order to avoid damage RF29 7.5A Anti-theft alarm coil the vehicle, even may cause fire or casualty. RF32 Instrument An improper fuse may cause a fire or RF34 Rear window heating casualties.

  • Page 213: Replacement Of Light Bulb

    Daytime running 13W/12V Left right each 1 White recommend you go to the BAIC dealer for lamp replacement of the bulbs. Rear position 3.6W/12V Left right each 1 The bulb may be hot when it just goes...

  • Page 214: Jumper Start

    Jumper start If the engine can’t be started up owing to the fact that the battery has excessively discharged, please start up the engine by connecting the battery on another vehicle with the jumper cable. In such case, please pay attention to the following notices: ●Rated voltage of the battery must be 12V or more, and the capacity (Ah) should not...
  • Page 215 When connecting the jumper cable, firstly 8. Connect the black jumper cable, as ●The engine compartment is a high risk connect the positive terminal, and then shown 3^4. Be careful connection, do not area. Improper maintenance could cause connect the negative terminal. cause short circuit.

  • Page 216: Emergency Towing

    Front towing of the vehicle Emergency towing When you need to tow the vehicle, you must comply with traffic regulations. Improper towing equipment can damage the vehicle. To ensure correct towing method and protect vehicle against accidental damage, it is recommended to find a professional roadside assistance personnel to tow the vehicle.
  • Page 217 The rear towing ring was directly welded in If the vehicle needs to be dragged, we Disassemble front towing ring the middle of the vehicle. suggest that you entrust an authorized BAIC 1. Counterclockwise to loosen and remove The inexperienced driver may not tow dealership...
  • Page 218 Using a flatbed truck to drag the vehicle Dragging from the front Dragging from rear Release the electronic parking brake, lift Release the electronic parking brake, lift The best drag way is to load and fix the fault and fixed front wheels. and fixed rear wheels, and fix the front vehicle on the rescue, the accident vehicle wheels on the small skateboards.
  • Page 219 6. Technical Data Vehicle identification code and product signs ................... 220 Engine And Transmission number（Chinese V）..................221 Engine And Transmission number（Chinese VI） ..................222 Vehicle Parameters ..........................223 General technical characteristics......................224 Main specifications and capacity of oil...................... 227...

  • Page 220: Vehicle Identification Code And Product Signs

    Vehicle identification code and product signs Vehicle identification code (VIN) is a unique identification number of the vehicle, which is marked in the front and rear.（The diagrams is only part of the vehicle VIN）. The product label plate is situated under the B pillar on the front passenger side ，...

  • Page 221: Engine And Transmission Number（Chinese V

    Engine And Transmission number（Chinese V） Engine type and serial number A is on the shell near the starter. MT transmission type B (MF515), C (F15) is on the transmission shell near starter. AT transmission type D is on the surface of the transmission.

  • Page 222: Engine And Transmission Number（Chinese Vi

    Engine And Transmission number（Chinese VI） Engine type and number A is on the shell near the starter. transmission type transmission shell near starter. CVT transmission type C is locate on the surface of the transmission.

  • Page 223: Vehicle Parameters

    Vehicle Parameters Dimension：mm...

  • Page 224: General Technical Characteristics

    General technical characteristics Vehicle type BJ7150U3BMB BJ7150U3BM1B BJ7150U3BAB BJ7151U3BMH BJ7151U3BCH Total length (mm) 4325/4300 Total width (mm) 1830/1815 (without exterior rearview mirror) Total height ( no-load) 1640 Wheelbase (mm) 2570 Front wheel track (mm) 1557 Rear wheel track (mm) 1561 Front suspension (mm) 927/930 Rear suspension (mm)
  • Page 225 Vehicle type BJ7150U3BMB BJ7150U3BM1B BJ7150U3BAB BJ7151U3BMH BJ7151U3BCH Engine displacement (ml) 1499 Cylinder diameter and Piston stroke (mm) 75*84.8 Compression ratio 10.5 Maximum torque/speed (N m/rpm) 148/3800 210/( 2000-4500 ) Maximum net power (kW/rpm) 82/6000 100/5500 The rated power/speed (kW/rpm) 85/6000 110/5500 Idle speed (r/min) 700±30...
  • Page 226 Vehicle type BJ7150U3BMB BJ7150U3BM1B BJ7150U3BAB BJ7151U3BMH BJ7151U3BCH Tire specification 205/60R16, 215/50R17 Driving wheel Rim specification 16*6J,17*7J Tire pressure No-load 230kPa(2.3bar)/ Full load 230kPa(2.3bar) Wheels Tire specification T125/80R15 Spare wheel Rim specification 15*4T Steel rim Tire pressure (kPa) 420kPa brake pedal free stroke (mm) 43692 Use limit brake block (regardless of Front...

  • Page 227: Main Specifications And Capacity Of Oil

    Main specifications and capacity of oil Parts Oil name Specifications units vehicle filling quantity A151 Engine Oil name SN 5W-30 A151R1 MF515-5MT GL-4 75W/90 1.9±0.1 F15-5MT MTF P-ll 75W/85 Transmission F206F-6MT Transmission oil MTF P-ll 75W/85 1.8±0.1 AW-1 CVTF-EX1 4.5±0.05 A151 engine cooling system 4.7±0.5 coolant...

  • Page 228: Maintenance Information

    7. Maintenance Information Maintenance and Service Practice ......................229 Maintenance Information Sheet ....................... 230...
  • Page 229 ● Often traveling in dusty regions or abnormality, you should timely go to the frequently exposed with high BAIC dealer for inspection and maintenance salt-content. and retain the maintenance records at any ●Driving on uneven road, road with water time. or mountain road.
  • Page 230 Maintenance Information Sheet Regular Maintenance Items Initial maintenance time Regular maintenance times Additional information Engine oil/ engine oil filter • • Replace every 2500 km under severe using conditions Replacement first time: 15000 km /1 year (whichever MF515-5MT comes first) Replacement every 30000 km/ 2 year (whichever comes first) Replacement every 4000km/2 year (whichever comes F15-5MT...
  • Page 231 Regular Maintenance Items Initial maintenance time Regular maintenance times Additional information Engine accessory belt Idling speed of the engine Check whether the crankcase ventilation control Inspection every 4000 km/ 2 years — — system is normal. (whichever comes first) Inspection every 4000 km/ 2 years Engine coolant (whichever comes first) Inspection every 4000 km/ 2 years...
  • Page 232 Regular Maintenance Items Initial maintenance time Regular maintenance times Additional information Battery Check the instrument display and the lighting both inside and outside the vehicle Maintenance mileage prompt reset Parking brake Check the dampers of the four wheels and the appearance of its damping spring, check if chassis fasteners are loose, and in case of any looseness, it is necessary to fasten according to required torque...

This manual is also suitable for:

Bj7150u3bmbBj7150u3bm1bBj7150u3babBj7151u3bmhBj7151u3bch

Table of Contents