Download Print this page

Advertisement

Quick Links

Foreword
Thank you for purchasing this car.
Please read this manual carefully before using this vehicle for the first time and keep it properly after reading. This manual is applicable to BJ60 series light off-road
vehicles and their derivatives. This Manual will help you to familiarize yourself as quickly as possible with the structure, various functions and methods of using the car,
as well as the relevant provisions of the Company. The user will lose the right to make a claim for any losses which may result from failure to the use the car in accordance
with the guidance of these Instructions or make alterations without the approval of the Company. Any application for warranty will be rejected by our authorized service
providers. The contents of the Manual will help you understand the correct ways in which the vehicle can be driven and maintained, allowing you to enjoy your driving to
the full.
The purpose of this manual is to provide the user with instructions and guidance on the use and maintenance of BJ60 series light off-road vehicles and their derivatives. If
you have any questions about this vehicle or this manual, please contact our authorized dealership of BAIC Group Off-road Vehicle Sales Service Co., Ltd.
Given that this Company will continue to develop new models and improve the car, the equipment and performance of subsequent models will change. However, no
separate notice will be made of such changes. Please do not use another edition of the instructions to make comparisons with the equipment or performance of the car you
have purchased, or use discrepancies between the two to request supplementary equipment. If you have any questions about the vehicle you have purchased and this manual,
please consult authorized dealership of BAIC Group Off-road Vehicle Sales Service Co., Ltd.
The driver must strictly abide by all auto-related laws and regulations. When this Manual was compiled, the relevant laws and regulations were fully taken into account
and complied with. However, some of the entries of the Manual may not accord with the latest revised laws or regulations at the time of your purchase.

Advertisement

loading
Need help?

Need help?

Do you have a question about the BJ60 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for BAIC BJ60 Series

  • Page 1 The purpose of this manual is to provide the user with instructions and guidance on the use and maintenance of BJ60 series light off-road vehicles and their derivatives. If you have any questions about this vehicle or this manual, please contact our authorized dealership of BAIC Group Off-road Vehicle Sales Service Co., Ltd.
  • Page 2 Some of the equipment described in this article may not have been fitted to the vehicle (please contact the authorized dealership of BAIC ORV for details). Without the written consent of the Company, no one shall reproduce, photocopy or translate any part of this manual, or reproduce or store this publication in a public retrieval system, or record it electrically or mechanically or disseminate it in any other form.
  • Page 3 Contents 1 Instructions for Safe Operation ........5 3 Driving guideline ............149 Safe Driving ..................... 6 Start and Driving ..................150 Seat belt ......................11 Drive mode ....................162 SRS ......................... 22 Transmission system ..................164 Car Safety for Children .................. 32 Differential lock * ..................
  • Page 4 Contents ACC ......................205 Urea system ....................281 Vehicle active security ................. 225 Battery ......................283 ......................236 Windshield Washing Liquid and Wiper Blade ..........286 Software upgrade (OTA) ................237 Tire ........................ 290 Idle start-stop system * ................239 Recovery and environmental protection ............
  • Page 5 Contents 6 Technical data ............325 Identification Number .................. 326 Vehicle Parameters ..................330 7 Rescue services ............336 Rescue service ....................337 8 Maintenance information ........338 Maintenance Specifications ................. 339...
  • Page 7 1 Instructions for Safe Operation Safe Driving ................................6 Seat belt ..................................11 SRS ................................... 22 Car Safety for Children ............................32 Safety label ................................40...
  • Page 8 Safe Driving Safe Driving Adjust the seat correctly Be cautious of the dangers of airbag While the vehicle is running, all passengers should While airbags can play a protective role, sitting to General Instructions put their seat back upright, appropriately adjust the close to them or failing to properly protect passengers This section mainly introduces the important seat position, and wear a seat belt.
  • Page 9 Safe Driving Keep Vehicle in a Safe Driving State The correct sitting posture of driver and passengers Punctures or mechanical faults are all extremely dangerous. To reduce the possibility of such Correct Sitting Posture of Driver problems, be sure to regularly check tires and vehicle The sitting posture of the driver relates directly to condition, and complete various types of regular driving safety and the degree of driver fatigue.
  • Page 10 Safe Driving ● Adjust the backrest to a suitable angle so that ● Keep your feet in the foot space in front of the Warning the back is fully attached to the backrest. front seats. ● Wear seat belt correctly. ●...
  • Page 11 Safe Driving Adjust the headrest so that the top of the headrest is Correct sitting posture of the rear passengers Adjust the headrest correctly at the same level as the top of your head and the back To ensure safety and reduce the risk of injuries during of your head is as close to the headrest as possible.
  • Page 12 Safe Driving When the brake system fails, the brake pedal may Driver-side floor mat Note require greater pedal travel and force to stop the The foot mat should be fixed inside the foot well and vehicle. ● The lowest position of the rear seat headrest should not obstruct pedal movement.
  • Page 13 Seat belt Seat belt Warning Warning General Instructions ● Pregnant women or the disabled must also ● Do not loosen the fastened seat belt during Your life is precious. Please make sure that you wear seat belt. Otherwise, these drivers or vehicle driving.
  • Page 14 BAIC ORV, even if there is no obvious deformation. In addition, also be sure to check the fastening device of the seat...
  • Page 15 Seat belt Physical principle frontal Consequences driver collision passengers not wearing seat belts Many people think that during a light vehicle collision, they can use their hands to protect their body thus prevent injury. This misunderstanding! During a vehicle collision, inertia will continue to propel all vehicle occupants not using seat belts, forward at the pre-collision speed.
  • Page 16 Seat belt Warning ● Do not use your hands to control your body during a collision, as it may cause serious harm to yourself. ● Airbag can never replace seat belt. Whether equipped with airbag or not, it is necessary to wear seat belt correctly.
  • Page 17 Seat belt Seat belt unfastened indicator light Warning ● The seat belt must be worn in the correct position. ● It is prohibited for two people to share seat belt, even for children. ● Always keep the correct sitting posture and wear seat belt during driving.
  • Page 18 Warning If the seat belt cannot be pulled out, please send it to the authorized dealership of BAIC ORV for inspection and repair as soon as possible while driving safely. Correctly adjust the front seat and its headrest, pull out the seat belt from the retractor, insert the latch of the seat belt into the buckle, and tighten the seat belt.
  • Page 19 Seat belt Wear rear seat belt Seat belt wearing position Warning Failure to wear seat belt properly may result in poor protection and serious injuries passengers on board. ● The correct sitting posture of passengers and the correct wearing of seat belts are necessary to fully utilize the role of seat belts.
  • Page 20 Seat belt To adjust the seat belt upwards, simply move the seat Adjust the seat belt height Warning belt height adjuster directly upwards until it is in place. The method to adjust the seat belt downwards The protective role of the seat belt can only come is as follows: into full play when the back rest is in an upright 1.
  • Page 21 Seat belt Pregnant women wear seat belt Unfastening the seat belt If you are a pregnant woman, the best way to protect 1. Press the red button next to the seat belt buckle yourself and your baby is to always wear your seat and the tongue will pop up automatically.
  • Page 22 Note hand to prevent occupant injury caused by the metal tongue on the seat belt during Please contact the authorized dealership of BAIC ● When the seat belt retractor is triggered, it rapid retraction. ORV as soon as possible in the following cases: will release a small amount of smoke and ●...
  • Page 23 ● Do not repair, remove or install seat belt or dealership of BAIC ORV. Otherwise, the seat belt may be damaged and the seat belt retractor may not seat belt retractor parts by yourself.
  • Page 24 In case of severe collision of the vehicle, the airbag Note will expand rapidly in a very short time, then deflate Description of SRS and contract to relieve the inertial impact of the ● After airbag deployment, human body. Therefore, the driver and passengers components and parts will become hot.
  • Page 25 ● The airbag can only be triggered once, after pretensioner may not work normally in case of which the whole SRS components and parts collision. Please go to the authorized dealership of must be replaced. BAIC ORV for inspection in time:...
  • Page 26 Please contact the authorized dealership of BAIC ORV as soon as possible in the following cases: ● The frontal airbag has been deployed. ● A collision accident occurred at the front of the vehicle, but the frontal airbag did not deploy.
  • Page 27 Please contact the authorized dealership of BAIC side airbags is unfolded. ORV as soon as possible in the event of: In a lateral collision, the side airbags determine ●...
  • Page 28 In the event of a severe side collision on the vehicle, Side curtain airbags Warning the gas-filled side curtain airbags can effectively reduce the risk of injury to the head and upper body ● The side curtain airbags provide additional of the driver and passengers.
  • Page 29 In many types of collision accident, such as rear-end In the following cases, please contact the authorized collision, side collision, oblique collision, rollover, dealership of BAIC ORV as soon as possible: frontal collision with thin column, the airbag may not ● Either side curtain airbag has been deployed.
  • Page 30 Rear-end collision or collision Side collision When the side outside the passenger compartment is impacted, the body suffers a weak impact, and the In the event of a rear-end collision or collision, the In case of side collision, the driver and passengers frontal airbag, side airbags and side curtain airbags driver and passengers moves towards the backrest will be moved to side, so the airbag deployed from...
  • Page 31 Oblique collision (angular collision) Rear-end collision Rollover accident In case of oblique collision, the impact energy When a rear end collision accident occurs with a large In a rollover accident, the forward airbag may not received by the SRS may not be enough to trigger the truck, the driver instinctively performs emergency deploy, and at this time, the frontal airbag deployment of the frontal airbag.
  • Page 32 Special collision Collision at the bottom of the vehicle If the vehicle is subjected to severe impacts such as falling or jumping steps, hitting road shoulders or hard objects, crossing deep pits, etc., even if the deformation of the vehicle is slight, due to the influence of rigid vehicle components, the airbag can still be deployed when the detected deceleration reaches the airbag deployment condition.
  • Page 33 The vehicle crosses the pit Vehicle falling or leaping steps...
  • Page 34 Car Safety for Children Car Safety for Children When multiple child occupants Safety instructions for child safety must be carried seat General Instructions There are three rear seats in your car and you can use Accident statistics verify that it is safer for children to them to properly place child passengers.
  • Page 35 Car Safety for Children ● Do not distract your attention from children while Warning driving. ● Take a rest after long-term driving, at least once ● If there is no child protective system, every two hours. children under 1.5m in height are not allowed to use conventional seat belt in the Warning vehicle.
  • Page 36 Car Safety for Children Class 1 child safety seat Class 2 child safety seat Child safety seat Child Seat Grade Classification (for reference use only): Class 0/0+ child seats Babies or infants who are under four years old and Children who are under seven years old and have a have a body weight of 9-18Kg should use a child seat body weight of 15-25Kg should use a three-point seat with a safety belt.
  • Page 37 Car Safety for Children Class 3 child safety seat Warning Warning ● The upper part of the seat belt must pass ● The upper part of the seat belt must pass through the middle of the shoulder, not through the middle of the shoulder, not through the neck in any case, and should be through the neck in any case, and should be firmly attached to the body.
  • Page 38 Car Safety for Children Install the child safety seat correctly Install child safety seat with ISOFIX system and top tether Before installing the child safety seat on the rear seat, the front seats must be adjusted to a proper position Be absolutely sure to mount and dismantle the child according to the size of the child safety seat and the seat in strict accordance with the use instructions of...
  • Page 39 Car Safety for Children 3. Press the ISOFIX child safety seat onto the fixing Warning ring in front of the seat until you hear the engagement sound of the child safety seat. ● The ISOFIX fixing ring on the back of the 4.
  • Page 40 Car Safety for Children Fixed position corresponding to the child safety seat Fixed position Mass group Size category Fixing module Front passenger seat Rear side seats Rear middle seat ★★ ISO/L1 Portable bed ★★ ISO/L2 ★ Group 0: < 10kg ISO/R1 ★...
  • Page 41 Car Safety for Children Applicability of mounting location of child safety seat Table of applicability of airbag status to child safety seat Front seat Rear side seat Applicable group Rear middle seat Airbag on Airbag off Forward mounting Backward installation Group 0: <...
  • Page 42 These safety labels are used to draw your attention to potential hazards that may cause serious injury. Please read these labels carefully. If the label falls off or is illegible, please contact the authorized dealership of BAIC ORV for replacement. Warning labels for A/C refrigerant and fan blades...
  • Page 43 2 Operation system and equipment Cab ................................... 42 Turn on and turn off vehicle ............................ 65 AVM sunroof* ................................. 83 Electric side step * ..............................86 A/C system ................................88 Vehicle Lights and Vision ............................98 Seats and Storage Facilities ........................... 114 Dashcam* ................................
  • Page 44 General Layout of Instruments and Operating Mechanisms 1. Left loudspeaker 2. Left button set of turning wheel 3. Horn 4. Turning wheel 5. Right button set of turning wheel 6. Infotainment screen 7. Side mirror 8. Front passenger handrail 9. Front passenger frontal airbag 10.
  • Page 45 13. Glove box switch 14. Right A/C central vent 15. Start/Stop button screen 16. A/C control panel 17. Wireless phone charger * 18. Gearshift handle 19. Multifunctional button 20. Left A/C central vent 21. Accelerator pedal 22. Brake pedal 23. Multifunctional switch unit 24.
  • Page 46 Instrument cluster 1. Engine tachometer 2. Gear position display area 3. Current drive mode 4. Information display area 5. Speedometer 6. Fuel meter and range display area 7. Outdoor temperature display Sport Mode 8. Distance display 9. Time display 10. Water temperature gauge...
  • Page 47 Speedometer Engine Tachometer Note The engine RPM meter shows the revolutions per engine tachometer must minute (rpm) of the engine. continuously in the red area. Otherwise, it could cause extreme damage to the engine. erat The speedometer shows the real-time speed of the car in km/h.
  • Page 48 When braking, accelerating, turning or driving on a Fuel meter Low fuel indicator light slope, the fuel in the fuel tank may sway, which may affect the accuracy of the fuel meter display. Check the fuel amount by placing the vehicle on a flat road. The fuel gauge can only show the actual fuel volume after the fuel level has stabilized for a certain length of time following refuelling.
  • Page 49 Warning If any of the following conditions occurs, please take When the engine is running, opening the cover the vehicle to the authorized dealership of BAIC of the coolant expansion tank is strictly ORV for inspection immediately: prohibited. This is because hot coolant and ●...
  • Page 50 Information display area Engine Coolant Warning Light Left and right turning indicator The information display area equipped with this lights vehicle defaults to displaying the vehicle image, and the corresponding vehicle is displayed in the menu Information, interface includes: ● Multimedia ●...
  • Page 51 Function button of the instrument Constantly displayed information in the Trip time accumulates from the moment the vehicle information display area is powered on after the most recent short-term/long- term memory reset. When the gear is in P position, the screen will display the picture of the vehicle, and when exiting from the The average speed is calculated since the last short- P position, it will display corresponding content...
  • Page 52 ● Maintenance Vehicle information interface Multimedia interface ● Compass calibration Select "vehicle" from the menu. The vehicle Select "Multimedia" from the menu and press the information interface includes: "OK" button. The multimedia interface includes: ● Fuel economy prompt ● Chassis information ●...
  • Page 53 ● Please move the gearshift handle back to the left ● Please reduce the speed if the differential lock is The prompts and alarm information interface provides prompts for the following: in use ● Please stop and shift to P gear again ●...
  • Page 54 It is recommended to go to the nearest ● Failure of hill descent control system ● The engine oil pressure is low, please stop the authorized dealership of BAIC ORV for ● The blind spot assist system is turned on vehicle and check it immediately. Telephone:...
  • Page 55 ● The engine temperature is high, please stop ● Failure of One-button Start system driving. Telephone: 4008108177! ● No smart key found ● Limp in transmission D gear! ● The key is left in the vehicle ● Limp in transmission P gear! ●...
  • Page 56 Warning Indicator Light 1. Cruise control indicator light* 2. Downhill assist on/ failure indicator light* 3. Low-speed creep indicator light* 4. Rear fog lamp indicator light 5. Front fog indicator lamp 6. Low beam indicator light 7. Position lamp indicator light Off-road mode 8.
  • Page 57 27. Engine emission indicator light will flash and produce a rhythmic prompting sound. indicating a malfunction in the system. Please go to a 28. TCS off indicator light nearby BAIC authorized repair shop for maintenance 9. ABS warning light (yellow) as soon as possible.
  • Page 58 (green) alarm will be triggered after the vehicle has been go to a nearby authorized dealership of BAIC ORV When the right turn signal is switched on via the light driven for a while. The indicator light will turn off for inspection and repair as soon as possible.
  • Page 59 16. Brake system failure indicator light EBD (red) If this light is lit while driving, it implies a weakened to the authorized dealership of BAIC ORV for braking effect. Park the vehicle in a safe place as soon If both ABS and EBD lights come on at the same inspection as soon as possible.
  • Page 60 The alarm pop-up window displays "EPB system ● If the indicator light goes on during driving, BAIC ORV and ensure that the fuel level is not lower failure" along with five beeps. If this indicator light stop immediately and contact the authorized than 20L;...
  • Page 61 When the ESC indicator light stays on, it indicates that the system is faulty and you must go to a nearby authorized dealership of BAIC ORV for inspection and repair as soon as possible.
  • Page 62 28. TCS off indicator light BAIC ORV. amount or does not go out after the vehicle self-test, please go to the authorized dealership of BAIC ORV When the TCS function is turned off, this light will Note for inspection and repair as soon as possible.
  • Page 63 This indicator light will flash dealership of BAIC ORV if it is safe to do so. (2Hz) when the front axle differential lock does not meet the locking conditions or is abnormal.
  • Page 64 Multifunctional turning wheel Warning ● Failure to use the turning wheel position adjuster and incorrect sitting posture may result in serious injuries. ● To avoid dangerous driving conditions and accidents, adjust the turning wheel only when the vehicle is stopped! ●...
  • Page 65 ● After the cruise control is turned on, move it Left button Group * Right button Set * downward to increase the following distance. 8. Cruise control RES+/SET- button ● In cruise control cancel state, move the button up to restore the current recorded speed; After the cruise control is turned on, move the button upward once to increase the set speed once.
  • Page 66 ● Move down the button once to turn on the photo Turning wheel heating switch * function, and move down for a long time to turn on the video recording. 8. Intelligent driving menu/custom button ● Move up, the infotainment screen will display the intelligent driving setting menu, such as lane departure, lane keeping and other settings.
  • Page 67 Turn on and turn off vehicle Mechanical key: The mechanical key can lock and Turn on and turn off vehicle Note unlock all doors when the vehicle is normally powered. ● Do not expose the smart key to high When carrying the smart key on an airplane, be sure temperatures for extended periods, such as This vehicle is equipped with 2 smart keys, each of not to press any button on the smart key while in the...
  • Page 68 Please contact the authorized you do not need to point the smart key at the dealership of BAIC ORV for details. If the key is vehicle, the key must be within a certain unable to operate the door or is unable to operate range to function when pressing the button.
  • Page 69 Turn on and turn off vehicle Emergency unlock The smart key contains a mechanical key which is used in emergency situations. If the smart key runs out of battery or fails due to other faults, remove the mechanical key and open the door as follows. 3.
  • Page 70 ● When replacing the battery of the key, be careful not to lose any components. ● Only use the same or equivalent battery recommended by BAIC ORV. ● Dispose of used batteries in accordance with local laws. 1. Remove the mechanical key;...
  • Page 71 7. After the battery is replaced, it is necessary to test whether the function of the smart key is normal. If the smart key still does not work properly, please contact the authorized dealership of BAIC ORV.
  • Page 72 If the smart key needs to be re-matched due to the loss of the key, please go to the authorized dealership of BAIC ORV in time, and the related operations will be carried out by professionals in the dealership. Note ●...
  • Page 73 Turn on and turn off vehicle The mobile phone Bluetooth key can be used Mobile phone Bluetooth Note when the mobile phone has been certified as unlocking follows: ● The vehicle cannot be started if the 1. Use the mobile phone to download and install the Bluetooth key start function times out Yueyequan APP.
  • Page 74 Turn on and turn off vehicle Smart key setting anti-theft If the vehicle does not meet the locking conditions, Anti-theft alarm system i.e. one of the door and liftgate is not closed or the Your vehicle is equipped with an anti-theft alarm Start/Stop button is in the "RUN"...
  • Page 75 Turn on and turn off vehicle Smart key anti-theft disarmed Trigger alarm Smart key turn on the lights When the anti-theft system is triggered, the turn signal will flash and the horn will give an alarm sound at the same time. No matter whether the trigger signal is removed or not, the alarm will stop after a cycle of system alarm, and the alarm will sound again when a new trigger occurs.
  • Page 76 Turn on and turn off vehicle Central door lock button Second-Time Anti-Theft Alarm Central locking system Setup Explanatory Notes on Operational Control of the Central Door Lock System When the system is in an anti-theft alert mode, after The central door lock system can be used to clock and the unlocking button is pressed down, the anti-theft open all vehicle doors: alert mode will be cancelled.
  • Page 77 Turn on and turn off vehicle Function of automatic lock Warning Do NOT leave children or the disabled inside the car alone! Because once the locking component Driving assistance Vehicle settings Light setup is operated, the door will be immediately locked, Door lock control making it difficult for children or disabled Driving assistance...
  • Page 78 Turn on and turn off vehicle Unlocking with the inside handle Door Note Locking and unlocking of intelligent access ● To prevent children from opening the rear system * doors with the inside handle of the door, the child restraint system should be turned on. ●...
  • Page 79 Turn on and turn off vehicle When closing the liftgate, be sure to check and Tail Door Warning confirm that the liftgate opening limiter is in the Open the liftgate unlocked state. Do not allow children to open or close the ●...
  • Page 80 Turn on and turn off vehicle Unlocking in emergency conditions Warning Note ● To close the liftgate manually, be sure to ● If the liftgate is frozen or covered by ice or push and press the liftgate outside the snow, do not forcibly open the liftgate. Heat vehicle to close it completely.
  • Page 81 Turn on and turn off vehicle 4. Control the lifting of the right rear doors window Manual up/down (gently pull up/press down to the 1st Window gear position) 5. Passenger-side window locking switch Power window ● Gently pull up/press down any control switch and All the power window can be operated from inside This vehicle is equipped with power window on the hold, the power window will keep lifting.
  • Page 82 Turn on and turn off vehicle Front passenger seat and rear window Passenger-side window locking switch Warning Take care when operating the electric windows, and improper operation may cause accident or injury. ● Make sure that no one is within the lifting range of the door and window when opening or closing the door and window.
  • Page 83 Turn on and turn off vehicle Window anti-pinch After the windows of the four doors manual learning Closing window on rainy days * process is completed, check whether the automatic up For the window equipped with one-touch lift function is restored, if it is restored, the learning is function, the glass will move reversely in case of successful.
  • Page 84 Turn on and turn off vehicle For vehicle equipped with four-door one-touch power Remote control function of window * Hint window, select whether to enable this function through the Infotainment screen> Vehicle settings> ● The window closing function on rainy days >...
  • Page 85 AVM sunroof* Sunroof open AVM sunroof* Warning Keyless Start/Stop button is located at AVM sunroof switch ● In order to ensure safe driving, driver are During "RUN" mode: prohibited from sunroof switch during ● When the Sunroof switch ① is moved backward, vehicle driving.
  • Page 86 AVM sunroof* Sunroof closed Electric sunshade Self-learning of sunroof initialization When Keyless Start/Stop button is in "RUN" mode: The sunshade can be opened together with the Before the sunroof initialization, ensure that the sunroof. sunroof is in the following state to ensure that the ●...
  • Page 87 AVM sunroof* 2. Long push the sunroof switch forward again until Note Warning the following actions are completed: The sunshade is fully open. ● The sunroof shall be regular service in ● In order to ensure safe driving, driver are Sunroof open→close.
  • Page 88 Electric side step * Electric side step * Powered pedal initialization (learning start and end positions) When the powered pedal system is disconnected and reconnected, the left and right powered pedal need to be initialized. The initialization is as follows: Driving assistance Vehicle settings Light setup...
  • Page 89 Electric side step * Powered pedal fault alarm Note When the powered pedal encounters obstacle or is stuck, if the pedal stops in the wrong position, the Keep the powered pedal clean and care for its buzzer will sound in the combination instrument proper working condition.
  • Page 90 If the pointer approaches the red area of The air conditioning filter must be replaced at the authorized dealership of BAIC ORV for the thermometer, you should switch off the air time of regular maintenance.
  • Page 91 A/C system Hint ● When the outside temperature and humidity are very high, the moisture will condense on the evaporator of the refrigeration system and form water droplets. This is a normal situation and there is no need to panic. ●...
  • Page 92 A/C system Infotainment screen A/C control interface 1. AUTO mode switch 2. A/C switch 3. Internal and external circulation switch 4. Zoning switch 5. System shutdown switch 6. Rear defroster switch 7. Negative ion switch 8. Unlock the fresh air switch 9.
  • Page 93 A/C system A/C control panel 1. Left temperature control switch 2. AUTO mode switch 3. Internal and external circulation switch 4. Zoning switch 5. Rear A/C switch 6. Right adjustable temperature switch 7. Rear defrosting mode switch 8. Front defrost mode switch 9.
  • Page 94 A/C system Infotainment screen rear A/C control interface 1. Second row temperature control switch 2. Rear A/C vent mode switch 3. AUTO mode switch 4. A/C off switch 5. Air volume adjustment switch Front A/C Rear A/C Seat temperature control Seat massage...
  • Page 95 A/C system Rear A/C Panel * 1. AUTO mode switch 2. Rear A/C panel display screen 3. Rear A/C vent mode switch 4. Air volume adjustment/shutdown switch 5. Second row right seat heating switch 6. Second row right seat ventilation switch 7.
  • Page 96 A/C system excess moisture generated during Interior Heating Rapid refrigeration dehumidification process is drained by the system 1. Adjust the temperature on the left and right sides For maximum cooling, close all windows, press the through a drain at the bottom of the vehicle. This may above 24°...
  • Page 97 A/C system Rear A/C vent A/C vent Note There are 6 vents in the rear A/C system: Front A/C vent ● Keep the vehicle in a cool place if possible. 1. Head blowing air vent The front A/C system has four types of vents: Parking in the hot sun can heat up the air Four, located on the roof, near the second and third- 1.
  • Page 98 A/C system Central vent Driver-side vent Front passenger seat vent To adjust the flow direction of each vent, simply The driver-side air outlet is adjusted in the same way The driver-side air outlet is adjusted in the same way push/toggle the knob in the middle of the vent in the as the central air outlet.
  • Page 99 A/C system Rear vent 2nd and 3rd row * Head blowing vent Vent outlet switch Turn the vent air outlet switch clockwise to the limit The picture above shows the rear A/C head blowing To adjust the vent flow, simply push/toggle the knob position to open, and turn it counterclockwise to the vent.
  • Page 100 (except the hazard headlamp, authorized warning light). dealership of BAIC ORV to inspection and When the knob is turned to position ①, i.e. position repair. 1. Vehicle light switch knob lamp, the parking lamps, tail lamps, front and rear outline marker lamps, license plate lamps and 2.
  • Page 101 Vehicle Lights and Vision Low/High Beam Light Switchover Turn signal When the headlamp low beam is turned on, push the left multifunctional control handle in the opposite Driving assistance Vehicle settings Light setup direction to the turning wheel, and the headlamp will change from low beam to high beam, and the blue Light control indicator light on the instrument cluster will...
  • Page 102 Vehicle Lights and Vision Adjust the light height of the headlamp by turning the Headlight height manual knob up and down using the following road adjustment conditions as reference: ● Position "0" Only use this to adjust the headlights when the driver, or only the driver and front passenger are in the car (when there is no luggage).
  • Page 103 Vehicle Lights and Vision Follow me home. Reminder of light open Interactive light source * After the START/STOP button is turned off, if the lights are not turned off, a buzzer will sound when the driver door is turned on. Welcome light Driving assistance Vehicle settings...
  • Page 104 When the camera detects a vehicle in front or the ● Using non-original windshield window off- ambient illumination becomes bright, this function road BAIC ORV will adversely affect the will automatically release the high beam, and the high IHBC. beam indicator light on instrument cluster will go out.
  • Page 105 Vehicle Lights and Vision 3. In case of emergency. Hazard warning light Note 4. When towing another vehicle or being towed. ● There are limitations to IHBC's ability to After the hazard warning light is switched on, all the identify road conditions through camera. In turn signal lights will flash at the same time.
  • Page 106 Vehicle Lights and Vision ③ front passenger seat side dome lamp switch Rear light Interior Lights Touch this switch, the front passenger seat dome Reading Light lamp will light up; Touch this switch again and the dome lamp turns off. ④...
  • Page 107 Vehicle Lights and Vision Ambient lamp * Backlight Brightness Adjustment Hint If the Start/ Stop button is at "OFF" position, the anti-leakage function will be turned on: the fog lamp, headlamps and dome lamp will be Driving assistance Vehicle settings Light setup turned off after about 8 minutes, if any one or Ambient lamp...
  • Page 108 Vehicle Lights and Vision AUTO position (intermittent wiping) and Windshield cleaning Windshield wiper continuous wiping Toggle the right multi-function control handle along The control part of the front windshield wipers is a Press the right multi-function control handle down to the direction of -arrow C (towards the driver's arms) function contained in the rear right multi-functional 1 gear in the "OFF"...
  • Page 109 Vehicle Lights and Vision Back windshield wiper Note ● It is prohibited to use the wiper when the windshield is dry. ● In cold or hot conditions, ensure that the wiper blade is not frozen/bonded or fixed to the windshield before operation. ●...
  • Page 110 Vehicle Lights and Vision 2. ON automatic anti-glare side mirror Side mirror automatically adjust the color depth of the interior In this position, the back window wiper opens and This vehicle is equipped with an interior side mirror side mirror surface according to the light intensity of performs a continuous low-speed wiping action.
  • Page 111 Vehicle Lights and Vision ● Right button ②: Press the corresponding switch Side mirror Warning to adjust the right side mirror. This vehicle is equipped with electric side mirrors, ● To ensure the normal function of the and the side mirrors have the function of side mirror electric adjustment and electric folding.
  • Page 112 Vehicle Lights and Vision Side Mirror Electric Folding * When the vehicle power mode is set to "RUN" Note position, press the back window defrosting/defogging button on the A/C panel, the indicator light on the ● The view displayed in the side mirror may button goes on and the side mirrors and back window affect the driver's ability to master the exact will be heated for defrosting and defogging.
  • Page 113 Vehicle Lights and Vision The memorial function of angular position for Call the memory location: the side mirror lens * The seat and side mirror will move to the memory position if the corresponding memory position button (1, 2, 3) is pressed. Driving assistance Vehicle settings Light setup...
  • Page 114 Vehicle Lights and Vision Automatic Folding/Open Side Mirror Hint ● If the electric adjustment function of the side mirror fails, it can be adjusted by pushing the outer edge of the mirror gently by hand. Driving assistance Vehicle settings Light setup ●...
  • Page 115 Vehicle Lights and Vision The sun visor is equipped with a Vehicle Electronic Identification vanity mirror Microwave Window The sun visor protects the occupants from impact of The microwave window is used to install the the dazzling sunlight in driving of the vehicle, which electronic identification of the vehicle, the position of can be used by opening it.
  • Page 116 Seats and Storage Facilities Seats and Storage Facilities Warning Warning Importance of Correctly Adjusting ● The seat can only be adjusted when the An incorrect sitting posture may cause serious Seats harm to the driver and passengers. vehicle is stationary. If the seat is adjusted while the vehicle is running, it can easily lead ●...
  • Page 117 Seats and Storage Facilities Adjust the headrest of the front seats (4 Headrest Warning directions) * Correctly adjusting the headrest is vitally important ● It is prohibited to adjust the headrest when for protecting passengers and reducing accidental the vehicle is running. injury rates.
  • Page 118 Seats and Storage Facilities 3. Forward adjustment of headrest: grasp both sides The second row headrest adjustment/third row Fold the headrest (suitable for the outboard headrest of the headrest and pull forward the headrest to headrest adjustment of the 7-seat model) adjust it to the proper position;...
  • Page 119 Seats and Storage Facilities If you are sitting at a distance of less than 25 cm, you Front seats heating* Seat can adjust the driver's seat position in the following Front seats ways: ● Move the seat backwards as much as possible, Warning while still comfortably pressing the pedal and ●...
  • Page 120 Seats and Storage Facilities Front seats ventilation * Hint Hint ● The front seat heating function can be set by ● The front seats ventilation function can be the switch; This function can also be set set by the switch. This function can also be through the radio navigation entertainment through radio...
  • Page 121 Seats and Storage Facilities Front seats massage * Front seats electric adjustment * Both the driver’s seat and the front passenger seat The driver's seat of this vehicle has an adjustable have the backrest massage function, which can be electric function in 8 directions, and that for the front done on adjustment interface of the infotainment passenger seat is in 6 directions.
  • Page 122 Seats and Storage Facilities Electric lumbar support *: Leg support *: Easy adjustment of front passenger seat *: The electric lumbar support control button ① is The driver's seat has leg support adjustment function. The convenient control switch is located on the inside Pull up the handle under the front of the seat and located on the outside of the driver cushion.
  • Page 123 Seats and Storage Facilities Manual adjustment of front seats * Seat Backrest Adjustment: Seat Height Adjustment (only for the driver’s seat): Back & Forth Adjustment of Seat: The backrests of two front seats can also be adjusted. Here, the driver’s seat is taken as an example. If the Press the height handle ③...
  • Page 124 Seats and Storage Facilities Note Note Note ● After adjusting the seat position, you may ● The seat position set by the manufacturer: ● Five seats in two rows: the designed backrest try to slide the seat back and forth and the front and rear adjustment stroke for the angle is 25°...
  • Page 125 Seats and Storage Facilities Driver's seat welcome* Seat adjustment position memory Note function * ● Seven seats and three rows: the backrest angle is 20° , it can be unlocked by the backrest unlocking strap handle, and the Driving assistance Vehicle settings Light setup backrest can be folded forward.
  • Page 126 Seats and Storage Facilities Call the memory location: Second row seat ventilation Second-row Seat Press the corresponding memory position button (1, Second-row Seat Heating * 2, 3) for about 1 s, and the seat and side mirror will be move to the memory position. Note ●...
  • Page 127 Seats and Storage Facilities Second-row Seat Massage * Warning Note ● In order to prevent battery loss, it is When seat heating is in use, the following passengers must be especially careful: prohibited to use the seat heating for a long time without starting the vehicle.
  • Page 128 Seats and Storage Facilities The second row seats (5 seats) adjustment Hint Backrest folding ● Before folding, please headrest adjustment to a proper position to avoid interference with the seat cushion or front seats. ● Put the seat belt back to its original position to avoid interference when folding the backrest.
  • Page 129 Seats and Storage Facilities Return of backrest Adjust the seats in the second row (7 seats) Backrest folding 1. Adjust the seat belt so that the backrest does not Forward and backward sliding adjustment of seat get stuck in the seat during recovery. 1.
  • Page 130 Seats and Storage Facilities Return of backrest Backrest angle adjustment Hint 1. Adjust the seat belt so that the backrest does not ● For vehicle with seat belt retaining clips, get stuck in the seat during recovery. attach the seat belt to the retaining clips when not in use, so as not to affect the folding of the backrest.
  • Page 131 Seats and Storage Facilities Access to the Third-row Seat Seat folding Third-row Seat Hint ● For vehicle equipped with seat belt retaining clips, attach the seat belt to the retaining clips when not in use, so as not to affect the seat adjustment and backrest folding.
  • Page 132 Seats and Storage Facilities Return of seat Seat temperature control * Warning 1. Adjust the seat belt so that the backrest does not get stuck in the seat during recovery. ● It is very dangerous to sit in the luggage area. In a collision accident, a passenger sitting in 2.
  • Page 133 Seats and Storage Facilities ● The seat ventilation is divided into four gear Seat massage * Storage facilities positions: high, medium, low and off. When the Open/close the glove box Start/Stop button is in the "RUN" mode, press the seat "Ventilation" button, and the three indicator lights of the button go on successively.
  • Page 134 Seats and Storage Facilities Turn on/off the front cup holder Open/close the front storage box Note ● Store liquids in the glove box only in tightly closed or unopened containers. Splashed liquids will damage the decorative items and electrical components inside the glove box and the dashboard.
  • Page 135 Seats and Storage Facilities Open/close the front armrest box Front storage box Door storage box ● Open: Press the left and right front armrest box The storage box is located next to the cigarette lighter Storage boxes are arranged under the door, the middle switches respectively to open the armrest box.
  • Page 136 Seats and Storage Facilities Driver side storage box Auxiliary dashboard rear storage box Rear Upper Storage Box of Auxiliary Dashboard ● Open: Press the rear storage box on auxiliary The storage box is located at the bottom left of the dashboard to open.
  • Page 137 Seats and Storage Facilities Open/close the rear center armrest * Open/close the rear center armrest storage box* Open/close the rear cup holder * ● Open: Press the top of the rear center armrest, the ● Open: Pull the strap on the upper part of the ●...
  • Page 138 Seats and Storage Facilities Map pocket Liftgate trim panel luggage hook Note ● When the map pocket opens, the mobile phone will slide to the bottom of the pocket. Front passenger seat luggage hook ● Open: Pull back the back pan map pocket; Similar luggage hook can be found on liftgate interior ●...
  • Page 139 Seats and Storage Facilities Coat hook Liftgate storage box Securing hook of luggage There is a coat hook on two sides of the rear for This storage box is located in the liftgate interior The securing hooks of luggage are installed in the hanging hats and thin coats.
  • Page 140 Seats and Storage Facilities Rear 12V power supply 12V power supply of the trunk Power outlet Front 12V power supply The 12V power supply of trunk is located on the left The rear 12V power supply is located below the rear side of the trunk.
  • Page 141 ● Do not use equipment with a maximum rated power exceeding 120W. Please consult with authorized dealership of BAIC ORV after- sales service center before adding electrical devices. There are USB ports and Type C power outlets at the On the lower left side of the front passenger seat there lower right of the driver's side.
  • Page 142 Seats and Storage Facilities Rear USB and Type C power outlet on the Storage box USB of the rear central armrest and 220V power supply interface * auxiliary instrument console Type C power outlet Below the rear air vent USB and Type C power outlet are located at the rear USB and Type C power outlet are installed in the rear of the console to charge mobile devices.
  • Page 143 Seats and Storage Facilities 4. When the LED indicator light green light is on, Wireless charging of mobile phone the 220V power supply is in normal working state; When the LED indicator light red light is flashing, the 220V power supply is in abnormal state.
  • Page 144 Seats and Storage Facilities Turn on / off wireless charging Hint ● This function can be used only if your mobile phone has wireless charging. ● The charging efficiency may be affected or Driving assistance Vehicle settings Light setup even failure may occur if the position or Side mirror reverse tilt angle setting Please complete the automatic within 2 minutes.
  • Page 145 Dashcam* ● Format via dashcam: Insert the SD card into the Dashcam* Hint dashcam (located on the left side of the side Dash-cam SD card mirror cover). After inserting the SD card, open ● All functions of the dashcam are realized the dashcam APP, enter the settings menu, and with the correct SD card.
  • Page 146 Dashcam* Recording resolution: the dashcam video resolution is View the live screen Hint available in 720p and 1080p, and the default resolution is 1080p. ● Due to the transmission rate limitation, it is normal for the real-time picture to be Hint delayed by 1~2 seconds, which will not affect Video...
  • Page 147 Dashcam* Photographing emergency View the file Hint recording ● The dashcam does not support continuous shooting, and the shooting interval shall be more than 1 second. The "click" sound is emitted only when the audio/video system Ordinary video volume is not 0. Ordinary video Emergency video ●...
  • Page 148 Dashcam* Hint ● The move operation allows you to move selected loops to the emergency recording folder so that they are not automatically overwritten by the system, while files in the emergency recording can only be deleted manually. ● When the dashcam camera is obscured by rain, sleet, mud, or other debris, real-time images, video recordings, and photos may be obscured or blurred.
  • Page 149 Warning authorized dealership of BAIC ORV before installing Make sure that accessories will not dim the vehicle ● Retrofitting of the front and engine accessories or replacing components and parts.
  • Page 150 Accessories and Refitting It is forbidden to install high-power electrical Warning appliances other than the ones which are originally configured in the vehicle. ● Improper retrofitting of this vehicle or Retrofitting high-power electrical appliances beyond installation of inappropriate accessories can the rated power may cause heating and short circuit easily lead to malfunctions and accidents.
  • Page 151 3 Driving guideline Start and Driving ..............................150 Drive mode ................................162 Transmission system .............................. 164 Differential lock * ..............................165 Crawl control (CCO) .............................. 168 Brake system ................................170 Parking sensor * ..............................185 Backup camera ............................... 188 AVM ..................................189 APA system * .................................
  • Page 152 Start and Driving ● When the button is pressed for the second time: Start and Driving "ACC" mode is enabled, and the circuits of radio, cigarette lighter and other accessories are Start/Stop button connected. Driving assistance Vehicle settings Light setup ●...
  • Page 153 Please contact the authorized dealership of and then go out, which is the EPS self-test turning, and reduce the disturbance to the turning BAIC ORV to check the EPS. process and a normal phenomenon. system caused by rough road. It can not only reduce...
  • Page 154 Start and Driving The factory state turning effort mode and ATS mode Electronic anti-theft function Hint are preset correspondingly. When the user switches The electric anti-theft function is used to prevent the turning mode via the infotainment screen To switch to turning effort mode, the following others from stealing the vehicle.
  • Page 155 10 to 15 s, and then repeat the normal startup procedure. ● If multiple startups fail, please go to the authorized dealership of BAIC ORV to check the vehicle for troubleshooting. Set the gear to "P/N" position, step on the brake pedal,...
  • Page 156 Start and Driving Start of vehicle Hint Warning Idle speed is related to engine coolant temperature. ● The start-up time of the engine may increase ● Do not start or operate the engine in a poorly As the coolant temperature rises, the idle speed of the at the temperature of -10°...
  • Page 157 Start and Driving Description of gear position: Turn off the engine Driving instructions Location and state of gearshift handle: 1. Stop the vehicle, press the brake pedal and place Automatic transmission model ● The gearshift handle has two steady-state the gearshift handle in "P" position. positions respectively, the central position and the 2.
  • Page 158 Start and Driving ● For the first-order and second-order gear shifting ● The button at the front of the gearshift handle is ● After the vehicle is completely stopped, press the by pushing forward or backward, when it is the UNLOCK button, which should be pressed brake pedal to the bottom or pull up the parking pushed to the first order and the gear shifting when the handle is moved out of the "P"...
  • Page 159 Start and Driving "R" position (reverse gear): "M" position (manual): Driving operation: ● When shifting into "R" position, make sure that ● Only when the current gear position is "D" ● Press the brake pedal to the bottom and the the vehicle has stopped completely.
  • Page 160 Start and Driving Note Note Note ● The vehicle will start the corresponding gear ● The transmission will switch to the "P" Automatically switch to "P" position when: shifting according to the change in resistance position automatically when the engine is ●...
  • Page 161 Start and Driving ● Do not allow the engine to run at a high speed Display transmission gear Warning when "D" or "R" position is selected and the position * vehicle is stationary. ● The driver must be sure to carry the smart On models equipped with automatic transmission, the ●...
  • Page 162 ● In case of this fault, it is recommended to 2. Depress the brake pedal, press the unlock button of the gearshift handle, and shift to “R” position. contact the authorized dealership of BAIC ORV for professional operation to eliminate 3. After engaging the "R" position, slowly release the fault.
  • Page 163 Start and Driving Note ● Avoid long-term forced de-"P" position. ● When the "P" position is released forcibly, the transmission is not locked. Be sure to use the parking brake or press the brake pedal to stop the vehicle. 5. Turn the transmission emergency unlock handle counterclockwise to get it into the chute;...
  • Page 164 Drive mode The operation of the differential lock requires manual Drive mode Electronic control 4 WD transfer operation by the driver, and there will be case corresponding prompts on the instrument. Driver assistance system and APA system are only available in move, economy, comfort mode, and the transfer case is in 2H gear position.
  • Page 165 Drive mode 4L: four-wheel drive low gear and four-wheel drive Note Warning can be used for a short period of time on off-road surfaces that require high traction at low speed, and it ● In order to avoid the failure of transfer case ●...
  • Page 166 Transmission system Transmission system Note General Instructions ● When vehicle into the off-road area, remember to drive slowly and the speed shall When the vehicle is off-road, improper operation of not exceed 25 km/h. the driver will cause abnormal damage to the transmission system.
  • Page 167 Differential lock * Operation instructions for rear axle differential Toggle the button (more than 1.8 seconds), when Differential lock * lock * indicator light on the instrument is always on General Instructions state, it indicates that the rear axle electric control differential lock is locked successfully, at this time, When one side of the drive wheel slips, the locking the LCD display on the instrument will pop up and...
  • Page 168 Differential lock * Overspeed alarm Manual unlocking Instructions for front axle electric control differential lock * After the rear axle differential lock is locked, the After the rear axle differential lock is locked, push the indicator light on the instrument will continue to flash button again, and the indicator light on the slowly (1 Hz) when the speed is within the range of...
  • Page 169 Differential lock * Forced unlocking Note Warning After the front axle differential lock is locked, it will ● The speed difference between the left and ● After the differential lock is locked, try as be forcibly unlocked under the following conditions. indicator light on the instrument goes out, right wheels is less than 50 rpm.
  • Page 170 Crawl control (CCO) Daily maintenance electronic control Crawl control (CCO) Warning differential lock system * Introduction to system Electronically controlled differential lock system ● Incorrect use of the crawl control may cause consists of mechatronics components. It is highly collisions and damages to the vehicle. The crawl control focuses on low-speed off-road reliable and usually does not require regular driving.
  • Page 171 Crawl control (CCO) ③ Press the accelerator pedal to raise the vehicle 4. The four-wheel drive is in 4L mode. Use method speed to the desired speed. The crawl control will set 5. EPB is in the release state. the vehicle speed to the speed at which the accelerator 6.
  • Page 172 Go to the authorized dealership of reaction time. other vehicles. This is a wrong way of driving. In the BAIC ORV for inspection and repair as soon as short period between these periods of braking, there possible.
  • Page 173 In such a case, you need to special attention to controlling the speed, and necessary to go to the authorized dealership of BAIC lightly depress the brake several times so that the maintaining a large safe distance with the vehicles at ORV to check the thickness of the brake friction plate braking parts are kept dry.
  • Page 174 If you hear this sound, wear. go to the authorized dealership of BAIC ORV as soon as possible to replace the brake friction plate. Installation of the spoiler, wheel trim panel, etc. must...
  • Page 175 Brake system When the vehicle is in any gear state and the The Braking System State & Start/Stop button is placed in "OFF" mode, the Braking System Fault Warning vehicle will automatically park, and the red parking Light light on the instrument cluster will go on.
  • Page 176 EPB system is faulty. Please contact the is used in D/R position. Please be careful. gearshift handle to the "P" gear position. authorized dealership of BAIC ORV for When the transfer case is 4L, minimize the ● In some special cases, if the EPB is not repair.
  • Page 177 Brake system Automatic release EPB: ABS anti-lock braking system Working mode of ABS anti-lock First make sure the door is closed and the driver's seat braking system The anti-lock braking system (ABS) can prevent belt is fastened. In AT driving gear position (i.e., not wheels from becoming locked when the brakes are When the speed reaches about 20 km/h, an automatic P or N position), step on the accelerator pedal, for...
  • Page 178 If the warning light does not go off, or is lit again operations as necessary. while driving. Please go to the authorized dealership of BAIC ORV for inspection and repair as soon as possible.
  • Page 179 Brake system ● Excessive moisture content of brake fluid will not Routine Maintenance of ABS electric brake force only cause poor brake due to vaporization, but distribution system ABS consists of integrated electromechanical also corrode the brake system and reduce the components.
  • Page 180 ● When the vehicle is stuck somewhere (e.g. on a at low speed to the nearest authorized dealership of movement intervention (RMI), autohold muddy road) and needs to move back and forth. BAIC ORV for inspection and repairing. (AUTOHOLD). If not, turn on the ESC system.
  • Page 181 Brake system ESC shutdown function Press the ESC OFF button again to activate the ESC Note function, and the TCS OFF and ESC OFF indicator light on the instrument cluster will go out. ● When the ESC function is turned off by pressing the ESC OFF button, the ESC Note function will be automatically restored after...
  • Page 182 Brake system TCS tow control system * HBA hydraulic brake assist * Warning TCS can prevent the driving wheel from slipping The brake assist system is for purpose of brake force The Electronic Stability System (ESC) has a during acceleration. optimization.
  • Page 183 2H/4H, and in the range of 1 km/h to 8 km/h fails. Please go to the authorized dealership of when the transfer case is at 4L) BAIC ORV for inspection and repair as soon as possible. RMI Anti-rollover function *...
  • Page 184 AUTOHOLD AUTOHOLD Forced Exit function fails. Please go to the authorized dealership of BAIC ORV for inspection and 1. When the seat belt is released or the driver side repair as soon as possible. door or shut down the engine is opened, the When the engine is running, close the driver's side AUTOHOLD function exits automatically.
  • Page 185 Brake system Use method Intelligent brake mode selection Hint Switch of brake modes (IBC) ● The brake mode has been associated with the Introduction to system two keys of the vehicle. The brake mode will The intelligent select function of the brake mode be different according to different key (IBC) provides three brake modes: comfort, normal carried.
  • Page 186 Brake system Comfort stop function (CST) Dynamic adaptation function (DAF) Brake disc outlet wiping function (BDW) Comfort stop function (CST) allows the vehicle to The Dynamic Adaptive Function (DAF) is used to properly reduce the brake pressure before stopping on keep still for feeling the brake pedal when the vehicle The Brake Disc Outlet Wiping Function (BDW) is a flat vehicle, reduce the pitching jitter of the vehicle,...
  • Page 187 Parking sensor * Parking sensor * Use of Parking Sensor Introduction to PDC A parking sensor system is a safety aid when parking or reversing. It uses ultrasound to detect the approximate distance between the vehicle and the obstacle, display it on a infotainment screen, and informs the driver (by an intermittent audible signal).
  • Page 188 Parking sensor * Sensor detection range Alert If there is an obstacle within the detection range, the Target level 1 (red) relevant warning indication will light up and an (Green) (Yellow) Alarm area audible alarm will sound. As the distance gets closer, the interval between audible alarm gets shorten;...
  • Page 189 Parking sensor * Front sensor Note Note The front sensor will operate only when the speed is less than about 15 km/h. It checks the approximate The following conditions may cause false alarms Inability to detect obstacles: distance from the front of the vehicle to the obstacle or no alarm: ●...
  • Page 190 Backup camera* Backup camera* Use of backup camera Note When the vehicle is in R position, the rear view Introduction to Backup Camera Other important precautions: camera starts working and the infotainment screen ● Do not spray the surface of the sensor This vehicle is equipped with a reverse camera on the will display a real-time backup camera.
  • Page 191 AVM* When the backup camera is started, if the system AVM* Hint detects fault information, the infotainment screen will Introduction to AVM display the prompt interface indicating a fault. ● The AVM may deform the outline of objects Conditions affecting the rear view of reverse on the screen, and relying on AVM to The AVM is a kind of comfort system, which consists ●...
  • Page 192 ● Driving into a garage with a heating system winter experiencing rapid temperature changes. ● If the components of the mounting camera is damaged, please check the position and calibration of the camera at the authorized dealership of BAIC ORV.
  • Page 193 AVM* Turn On/Off AVM Method Use of AVM Hint ● Shift the gear to the "R" position, the AVM is AVM switch automatically turned on; After exiting the R ● The AVM will not function properly until position, if there is no other operation, the AVM the Start/Stop button is in the "RUN"...
  • Page 194 AVM* ● Sensor display: sensor display style, 2D sensor or Switching operation of AVM interface AVM setting 3D sensor can be selected. ● Brightness adjustment: adjust the brightness of Please be aware of the perimeter of the vehicle Color of body Cangshi green Misty blue Snow white...
  • Page 195 APA system * APA system * Warning Warning Introduction to APA ● This system is a PAS and cannot completely ● The vehicle will brake only when it The fully automatic parking system uses 4 AVM replace the driver's operation. When using encounters obstacle continuously...
  • Page 196 APA system * Warning Note Note ● This system does not apply to parking ● The system may not be able to detect The system may not recognize obstacle that: scenarios where there following obstacles around vehicle (e.g., ● Smaller diameter obstacle, such as barbed obstacles: protrusions that are much higher than the wire fences, etc.
  • Page 197 APA system * Note Note Note ● When cleaning the vehicle, only a small ● The system performs calculation based on ● To ensure the normal operation of the stream of water can be used to wash the the circumference of the wheel and parks the system, the camera must be kept clean (free sensor for a short time, and a distance of at vehicle into the parking space by planning...
  • Page 198 APA system * Use of APA system Note Note ● The user's intention might not be effectively ● It is not recommended to use APA in judged (such as emergency brake of users), complicated circumstances, such resulting in brake by mistake during irregular parking by surrounding vehicle, parking.
  • Page 199 Remote control parking with the mobile phone* During APA, the following conditions can cause the Remote control parking with Note APA to pause: the mobile phone* ● Release the seat belt. ● This system is mainly suitable for parking spaces with standard and clear parking ●...
  • Page 200 Remote control parking with the mobile phone* 4. When the system control vehicle is parked, the 4. Follow the mobile phone prompts to press and Note user shall monitor the parking process in real time hold the button until pulling out is completed. to ensure that the parking can be terminated in Suspend or terminate remote pull-out ●...
  • Page 201 Reverse with track guidance assist * ● The trunk door is open. Reverse with track guidance ● The door is turned on. assist * ● Obstacles are encountered during reverse with Introduction to reverse with track track guidance. The system clears the memory path when the guidance-assisted system Please be aware of the perimeter of the vehicle following conditions are met:...
  • Page 202 System of depth detection System of depth detection Note Note When the all-terrain switch is turned to the wading ● The depth detection is only a kind of driving ● In view of the low underwater visibility in mode, the wading detection function is started. Under assistance function.
  • Page 203 Cruise control * Turn on / off the cruise control Cruise control * Warning The cruise control is a system that controls the throttle ● Never use the cruise control in extreme by means of an electronic program and keeps the weather (such as heavy fog, rain, snow, hail, vehicle moving automatically at a constant speed.
  • Page 204 Cruise control * Increase / Decrease Cruising Speed 3. Toggle down the cruise control RES+/SET- When the cruise control is turned on, toggle the ACC button, so that the vehicle will cruise at the current switch upward to exit the cruise control. At this time, 1.
  • Page 205 Cruise control * ● The transmission will shift the gear to N position. Overtaking ● Toggle the ACC switch downward. Step on the accelerator pedal to accelerate when you need to overtaking. After the accelerator pedal is ● When ESC is working. released, the vehicle will gradually return to the Recovery of Cruise Control previous set cruising speed.
  • Page 206 ● Do not use high-pressure cleaner. The Intelligent Driver Assistance System can actively needs to be replaced, please send the vehicle monitor the road conditions around the vehicle and to the authorized dealership of BAIC ORV. realize assistive driving. This ensures proper handling, installation Note and mmWave sensor sensor of the camera.
  • Page 207 ACC* ACC* Note Warning The function of Adaptive Cruise Control (ACC) is ● The radio observatories are located at ● The trailer degrades dynamic based on conventional fixed speed cruise control, No.1703, Jiujiang Highway, Songjiang performance of the ACC system. using a front camera to detect the vehicle in front and District, Shanghai;...
  • Page 208 ACC* Warning Warning Warning ● Due to the complexity of real-time traffic, ● For safety reasons, ACC system cannot be ● The ACC system only works on vehicle roads, weather, etc., the camera cannot activated when ESC function is not turned travelling in the same direction ahead of the guarantee correct detection in all conditions.
  • Page 209 ACC* Problems of detection Warning Warning The front camera may not be able to detect the target ● The ACC system is limited by the limitations ● When the ACC is activated, the instrument vehicle or detect it later in the following situations: of the camera, and may brake unnecessarily will display the situation of the vehicle in or not when necessary.
  • Page 210 ACC* 2. Narrow vehicles ahead 4. Vehicle equipped with special goods/equipment 3. Slope The front camera may not be able to detect narrow When the vehicle enters the slope, the front camera The front camera cannot detect items or accessories loaded on the front vehicle beyond its body sides, rear vehicles such as motorcycles and bicycles.
  • Page 211 ACC* 5. Stationary vehicle ahead 6. Drive through the tunnel 7. Other vehicles change lanes The front camera cannot reliably identify stationary The front camera sensor may not work properly when When a vehicle in an adjacent lane merges into your vehicles ahead.
  • Page 212 ACC* Turn On/Off ACC Starting interface: Hint Off-road mode ● The system may brake with noises when ACC is working. This phenomenon is normal, please rest assured. Driving assistance Vehicle settings Light setup Intelligent driving Integrated intelligent Cruise control mode cruise control Note Forward collision warning...
  • Page 213 ACC* Turn on/off/exit ACC Activate ACC Hint After the ACC is turned on, it shall normally work only when the following conditions are satisfied: ● Set cruise control mode to ACC in infotainment screen settings. ● The gear position is in D position. ●...
  • Page 214 ACC* Cancel ACC Increase/decrease target speed Hint ● When ACC state is activated, by toggling down the ACC switch with the turning wheel, exit ACC; Toggle the ACC switch upward from the turning wheel to turn it off. Hint ACC will automatically exit if: ●...
  • Page 215 ACC* After ACC is turned on, toggle the cruise control Headway adjustment Restore ACC RES+ button downward to decrease the target speed by 5km/h. Toggle the cruise control RES+ button downward for the first time to decrease the target speed to the nearest multiple of 5 (for example, 43km/h will be decreased to 40km/h);...
  • Page 216 Please go to the authorized dealership of BAIC ORV If the vehicle stops within 10 minutes, the driver is Hint to have the ACC system professionally calibrated in...
  • Page 217 ACC* IACC * Warning Note Please read and familiarize yourself with all of this chapter before using IACC. ● The IACC cannot cover all driving IACC may incorrectly detect lane marking or scenarios, traffic, weather road fail to detect lane marking, or may incorrectly IACC (IACC) provides longitudinal and lateral conditions.
  • Page 218 ACC* Note Note Note ● The lane marking is damaged, illegible or ● The driver gets involved when the system is ● During operation, the system may cause the invisible, lane marking working; vehicle to brake when braking is not indistinguishable from the road color, or the required or when you do not intend to brake.
  • Page 219 ● The components and parts related to vehicle auxiliary performance, do not use IACC, control are not original matching parts or and go to the authorized dealership of BAIC The cruise control mode can be selected by the have been retrofitted.
  • Page 220 ACC* ⑤ The preceding vehicle is identified and the Display interface Turn on/off/exit IACC preceding vehicle is highlighted when ACC is Off-road mode activated ⑥ Recognized distance from the front vehicle ⑦ The vehicle ⑧ Lane marking. When the lane marking is visible, the IACC is moving along the lane in the center Total distance 999999 km ①...
  • Page 221 ACC* Activate IACC Recover IACC Take over When the IACC detects that a driver's hands are off the turning wheel, the system will send a prompt, indicating "Hold your turning wheel and drive carefully." If the driver does not respond in time, the system will issue a takeover request "Please take over the turning wheel, drive carefully."...
  • Page 222 ACC* The user can turn on/off the speed limit sign Speed limit sign identification system * Note recognition function through the infotainment screen Speed sign recognition system (TSR) uses camera to and set the alarm method. detect the speed limit on the road or beside the road ●...
  • Page 223 Cruise control mode control traffic and road conditions. ● Please contact the authorized dealership of Forward collision warning Standard High BAIC ORV for inspection when the system Sensitivity is prompted. Automatic emergency braking Hint ● In Traffic sign identification Alarm display only...
  • Page 224 ACC* When the vehicle is started, the LDW switch is in the Display interface LDW sensitivity ON state, and the vehicle speed is higher than 60 The LDW sensitivity is divided into three levels: Off-road mode km/h, the LDW function is activated. Low, standard, high.
  • Page 225 ● Please contact the authorized dealership of cause injury or property damage. BAIC ORV for inspection when the system ● The function does not work when the camera is prompted. is covered by rain, snow, mud and ice. The ●...
  • Page 226 ACC* Display interface When LKA is active, it exits when one of the LKA sensitivity following conditions is met: The LKA sensitivity is divided into three levels: Low, Off-road mode ● The speed is less than 55 km/h or the speed is standard, high.
  • Page 227 Vehicle active security Turn on/off FCW Pre-alarm Vehicle active security During driving, when there is a risk of collision FCW * between the subject vehicle and the preceding vehicle, the system will pre-alarm visually and The FCW detects vehicle and pedestrian targets by audibly, and the instrument cluster will prompt cameras.
  • Page 228 Vehicle active security Warning Warning Warning ● Improperly retrofitted vehicles (such as ● Improper ● If the camera is obscured by bird droppings, maintenance cause reducing the ground clearance, changing the misalignment of the sensor and affect the dirt, ice, insects, etc., the PAB may not work. front license plate, etc.) may degrade normal operation of the system.
  • Page 229 Vehicle active security Warning Warning Hint ● Instrument failure. The FCW is only a driver assistance function, For pedestrians: and there is a risk that the pedestrian cannot be ● When the system detects pedestrians by ● The gear position is not in D. recognized due to limitation of objective identifying following...
  • Page 230 Vehicle active security The AEB works at about 5 to 130 km/h for vehicle AEB * Hint targets and 5 to 80 km/h for pedestrians and two- Turn on/off automatic emergency braking wheelers. ● There is a stationary obstacle ahead (e.g., vehicle at anchor).
  • Page 231 Vehicle active security Warning Warning Warning ● Due to the inherent limitations of the system, ● The AEB cannot guarantee that collision will ● If the camera is obscured by bird droppings, the AEB may misidentify vehicle and be avoided under all circumstances. The dirt, ice, insects, etc., the PAB may not work.
  • Page 232 Vehicle active security Warning Warning Hint ● If the AEB actively brakes to completely ● Pedestrians carry large objects or wear The AEB may not work when: avoid the collision, the system will release the clothes that make their outline unclear. ●...
  • Page 233 Vehicle active security Lane change decision aid * Hint Hint The LCA detects the moving vehicle, motorcycle, ● Manual shutdown of ESC or ESC fails. The AEB must be shut down in the following bicycle and other objects behind the adjacent lane ●...
  • Page 234 Vehicle active security Hint Hint Hint ● Do not rely too much on LCA to reduce ● Damaged bumper or miscalibrated sensor. ● The LCA may issue a warning when there is lateral collision and other related accidents. no risk of collision. Please be alert and keep ●...
  • Page 235 Vehicle active security Turn On/Off the SRPA SRPA* Hint The user can turn the SRPA on/off through the When the vehicle reverses at a low speed (≤ 15 km/h), infotainment screen. ● Road and weather conditions may adversely the SRPA detects that there are risk of collision such affect the sensor detection area.
  • Page 236 Vehicle active security When the system detects approaching vehicle, Open door warning * Note bicycle or other objects in the lanes on both sides, if Brief Introduction of the Open Door Warning there is a risk of collision in the door opening, the ●...
  • Page 237 Vehicle active security Blind spot monitoring * Warning Hint During driving (speed greater than 12 km/h), when ● Road and weather conditions may adversely the system detects a vehicle, bicycle, etc. in the blind The blind spot monitoring system function is spot of the side mirror, the corresponding side mirror affect the sensor detection area.
  • Page 238 HUD* Hint Hint The HUD displays include basic information, ADAS ● The blind spot monitoring system can only ● The light-transmitting area of HUD is the information, 2D navigation information, telephone alert the driver of the blind spot risk through image output port.
  • Page 239 Message Center Unread (1) You can choose the following upgrade methods. It is authorized dealership of BAIC ORV. OTA upgrade recommended to use reservation upgrade to reduce Unauthorized personnel are not allowed to New version found: This version is an OTA upgrade file (VA.B.C_20210221_60H).
  • Page 240 ● The vehicle power supply is in OFF position; ● Unadjustable wiper, etc. ● The vehicle gear position is in P position; Emergency measures: ● Turn off the remote control function. If the software update is abnormal, please contact the authorized BAIC dealership with customer service hotline: 4008108177.
  • Page 241 Idle start-stop system * Press the Idle Start/Stop switch again, so that the idle Idle start-stop system * Idle Start/Stop on/off stop/start function will be turned on again, and the Using Idle Stop/Start function can save fuel. When idle Start/Stop indicator light goes out.
  • Page 242 Idle start-stop system * 10. The vehicle has had a start exceeding 10 km/h; Note 11. There is no abnormality in engine self-learning, emission control and fault diagnosis; When the engine is in an idle stop state, once the following situations occur, the engine will 12.
  • Page 243 Driving Skills Do not use excessively low gear positions when Driving Skills Preparation before driving driving on icy or wet and slippery roads, because the It is best to carry out safety checks before driving. Driving hint brake function of the engine may cause the wheel to Spending just a few minutes checking will help you slip or get out of control.
  • Page 244 Driving Skills Move the front passenger’s seat backwards as much Before Starting the Engine While driving as possible. Tire: check tire pressure, and whether there are nicks, Instrument: Confirm that the instrument is working Ensure that infants and children are properly placed damage, or excessive wear.
  • Page 245 Driving Skills During the running-in period, the following items Running-in tires and brake pad Driving During Run-In Period shall be observed: Within the first 500 km, drive at a moderate speed and To ensure the service life of the vehicle, a run-in ●...
  • Page 246 Meanwhile, lightly depress the long, and the brake fluid must be replaced brake pedal. Drive your vehicle carefully. If the according to the specified period. brake still fails to operate safely, pull over and contact the authorized dealership of BAIC ORV for assistance.
  • Page 247 Driving Skills Driving in the rain Warning Warning When driving on slippery roads ● Before driving, make sure that the parking ● When driving on slippery roads, emergency When there is rain, please drive carefully because the brake is completely deactivated. brake, acceleration and turning may cause visibility is low, the vehicle windows are foggy, and ●...
  • Page 248 Driving Skills In addition to keeping the speed low during vehicle Still water Driving in water wading, try not to stop, not to gear shifting, not to Avoid driving in still water deeper than 50 cm. When Although your vehicle can travel by wading, there are retract the accelerator, or not to accelerate.
  • Page 249 Drive off at low speed. This will When snow or ice accumulates in the fender, it will contact your authorized dealership of BAIC ORV for give a sufficient time for the lubrication oil of the make steering difficult. When driving in cold assistance.
  • Page 250 Driving Skills ● Do not put your feet on the brake pedal. This will Efficient use of vehicle Economy of fuel cause the brake pad to wear excessively, overheat ● Maintain the correct tire pressure. Insufficient air Fuel economy is related to many factors. Personal and waste fuel.
  • Page 251 Driving Skills ● Select the appropriate gear position according to the speed. Do not drive in a low gear at a high speed. ● Do regular service according to maintenance requirements. ● Accelerate slowly and evenly when starting again after the vehicle stops at a signal light or stop sign. ●...
  • Page 252 4 Maintenance Safety and Maintenance ............................251 Fuel system................................253 Remote communication module ..........................255 Internal Maintenance .............................. 256 External Maintenance ............................258 Engine Compartment ............................. 264 Engine oil ................................268 Coolant ................................... 274 Brake fluid ................................278 Urea system* ................................281 Battery ..................................
  • Page 253 Safety and Maintenance Safety and Maintenance Warning Note Service items not mentioned in this chapter should all Incorrect vehicle maintenance or driving Only some important safety precautions are be performed by accredited or other qualified problematic vehicles cause traffic listed in this section. We are unable to list all of technicians.
  • Page 254 Since maintenance is the responsibility of the vehicle 3. Check the level of power turning fluid that:all unauthorized replacements, refitting and owner, you must follow the advice of BAIC for 4. Check the level of the windshield cleaning agent adjustments of these devices by the car owner...
  • Page 255 Fuel system 6.Keep spark away from engine compartment. Safety during maintenance of the Fuel system 7.Wear protective clothes during the work. If vehicle possible, wear gloves that are made of impermeable After the engine stops running, the cooling fan may materials.
  • Page 256 Fuel system Gasoline model: 2. When the fuel tank door pops up, open the filler Adding Fuel cap for fuel filling. Before adding fuel, please turn off the engine first. Then, follow the steps below: 3. When filling fuel, pay attention to the way in which the fuel nozzle is held: do not make the fuel nozzle skew.
  • Page 257 ● Ensure that the fuel filler cap is tightened to battery. When the "remote control" function fails, go Note to the authorized dealership of BAIC ORV to replace prevent fuel spillage in case of accident. ● If the gasoline octane number (RON) used in the remote communication module.
  • Page 258 Regularly wash with detergents and keep the carpet or similar items. must be repaired at an authorized dealership clean. ● Avoid exposing your vehicle to strong of BAIC ORV. sunlight for a long time to prevent leather or Note Cleaning maintenance similar articles from fading.
  • Page 259 4. If stains cannot be cleaned with the above dealership of BAIC ORV as soon as possible. 3. Wait until the seat belt is completely dry, and then operation, special leather soap or detergent can be wind up the seat belt.
  • Page 260 External Maintenance External Maintenance Wash the vehicle Note Frequent vehicle washing helps maintain the ● It is recommended that the new vehicle be Note appearance of the vehicle. waxing only after it has been used for 6 The vehicle should be washed in a cool place. Do ●...
  • Page 261 BAIC ORV. The impact on the body paint depends to a great be replaced during cleaning.
  • Page 262 Polish wax:It can restore gloss to those paint surfaces paint spread over it. The work shall be done in the which have been oxidized or have lost gloss. Mainly authorized dealership of BAIC ORV. used to restore the gloss of the paint surface. Note...
  • Page 263 External Maintenance After the car body surface is maintained, the wax Cleaning maintenance Cleaning of Window and Side remaining on the window should be removed with exterior plastic Mirror special cleaning agent and cleaning cloth to avoid scratching the wiper blade. Usually, exterior plastic parts can be cleaned using Use an alcohol-containing glass cleaning agent to water, a soft cloth and a soft brush.
  • Page 264 External Maintenance 6. Turn off the front wiper inspection and repair Maintenance operation: Cleaning of Front Windshield mode. 1. Remove dust and dirt from the sealing strip with Wiper Blade soft cloth. Note 2. Regularly apply the special protective agent on ●...
  • Page 265 The authorized plastic scraper or cleaning gasoline. ● The use of high-pressure cleaner may cause dealership of BAIC ORV is able to provide a suitable service. permanent visible or invisible damage to the wheel, resulting in serious casualties.
  • Page 266 Engine Compartment Engine Compartment Warning Warning Work Safety Instructions for the Engine ● Do not leak the working fluid on the hot ● When working under a vehicle, it shall be Compartment engine or exhaust device, which may cause ensured that the vehicle does not move and When working on the engine or the engine the risk of fire! supported in place with suitable brackets.
  • Page 267 Engine Compartment Engine compartment hood Warning ON/OFF If the engine compartment cover is not tightly closed, do NOT drive the vehicle. Lift up the engine compartment hood slightly, press the opening handle of the secondary engine compartment hood upward with your fingers, and lift up the handle.
  • Page 268 Engine Compartment Arrangement of engine compartment (gasoline model) 1. Windshield washing liquid storage tank 2. Coolant expansion tank 3. Dipstick 4. Brake fluid reservoir 5. Battery 6. Fuse (under the covering board) Note ● The figure shows the view with the engine compartment trim panel removed.
  • Page 269 Engine Compartment Engine compartment layout (diesel models) 1. Windshield washing liquid storage tank 2. Expansion tank of engine coolant 3. Oil filler cap 4. Dipstick 5. Brake fluid reservoir 6. Fuse (under the covering board) 7. Coolant expansion tank of air cooling in water Note ●...
  • Page 270 Contact the authorized dealership of in a hot state, you should turn off the engine and BAIC ORV as soon as possible for inspection and wait for at least 15 minutes until all the engine repair for the system.
  • Page 271 Engine oil Gasoline model: 6. It is recommended that the number of consecutive Diesel models: tests should not exceed 3. If the oil level at both ends of the dipstick are not the same, the lower oil level shall prevail. The specific steps are as follows: The specific steps are as follows: 1.
  • Page 272 Engine oil Engine running will consume a certain amount of Engine Oil Refilling (Gasoline engine oil. The amount of engine oil consumed Models) depends on the driving style and vehicle use. Therefore, it is necessary to regularly check the Engine oil should be added by a small amount over engine oil level.
  • Page 273 Engine oil 5. Once the oil level is close to the maximum mark, Engine oil replenishment (diesel Note please stop refueling immediately and install and models) tighten the oil filler cap. ● If the oil level exceeds the maximum mark, Engine oil should be added by a small amount over do not start the engine;...
  • Page 274 Engine oil 5. Once the oil level is close to the maximum mark, Warning Note please stop refueling immediately and install and tighten the oil filler cap. ● The engine oil filler cap must always be in ● Use ACEA normal C3 grade or higher the tightening state to prevent the engine special engine oil for diesel engines.
  • Page 275 Replace the engine oil by the cycle which is specified ● Do not add any lubricant to the engine oil. in BAIC’s Warranty Manual. The service life of the If you have no relevant professional knowledge, do NOT replace the engine oil on your own.
  • Page 276 Coolant Coolant Warning Note Role of Coolant ● The coolant must be kept in a closed Do NOT add into the coolant the coolant of Correctly using coolant can play the role of protection container and kept out of reach of children. another manufacturer.
  • Page 277 ● The engine compartment is a high-risk area. contact the authorized dealership of BAIC ORV as Be sure to carefully read and follow the soon as possible for system inspection and repair.
  • Page 278 Coolant When the engine is in cold state, it is the best time to Checking Coolant Level Engine coolant expansion tank check whether the coolant level is within the mark on Adding Coolant (diesel models) the side of expansion tank. A normal coolant level is vitally important for the ●...
  • Page 279 At this time, it is necessary to go to To avoid burnt, wrap the coolant recovery reservoir the authorized dealership of BAIC ORV to inspect the cooling system as soon as cover with a piece of large and thick cloth, and possible, so as not to damage the engine.
  • Page 280 ● The brake fluid level shall be located between the contact the authorized dealership of BAIC ORV maximum mark and the minimum mark. immediately. If the brake fluid level is below the minimum mark of the storage tank, do NOT drive the vehicle.
  • Page 281 Due to the wear of the brake lining, the braking developed by BAIC ORV for this vehicle. To ensure too low. In order to avoid accidents, you system of the vehicle will automatically adjust the...
  • Page 282 Otherwise, go to the authorized even cause the braking system to be completely dealership of BAIC ORV for inspection and in effective, thus resulting in accidents. repair immediately.
  • Page 283 Urea system* 5. After filling the AdBlue, tighten the AdBlue tank Urea system* cap clockwise immediately until you hear a click Turn off the engine before filling. Then, follow the sound. steps below: 6. After closing the urea tank cap, close the fuel tank door.
  • Page 284 In case of abnormal AdBlue immediately to prevent corrosion. ● Containers made of aluminum, copper, system, contact the dealership of BAIC ● Keep AdBlue away from children. copper, unalloyed, or galvanized steel are Motor as soon as possible for system ●...
  • Page 285 Therefore, the maintenance on the electrical system of the vehicle. BAIC ORV if necessary. battery shall be stored in a well-ventilated Without absolute certainty, the work should be place during charging. carried out by the authorized dealership of BAIC ORV.
  • Page 286 4. Keep the battery dry and clean to prevent dealership of BAIC ORV and charge it in time if ● Do not connect to damaged or leaking blockage of battery vents.
  • Page 287 ● Keep good ventilation around the top of the damage the electrical system of the vehicle. dealership of BAIC ORV and the intelligent battery battery and avoid strong light near the battery (the sensor shall be re-matched ●...
  • Page 288 Filling washing liquid flammable gases and minimize the danger of fire The battery of the original factory of BAIC ORV can and explosion. meet the requirements of vehicle maintenance, This vehicle is equipped with 48 V lithium battery vehicle performance and safety.
  • Page 289 BAIC ORV to check and adjust the positioning windshield washer can be operated only angle. when the front rear wiper blade is free of interference or obstruction. It is necessary to regularly check the wiper blade and replace the wiper blade as required.
  • Page 290 Windshield Washing Liquid and Wiper Blade Replacing Front Wiper Blade Knob 3. Press the button to unlock the wiper blade, and 2. Pull up the wiper arm and turn the wiper blade then pull the wiper blade in the direction of- along the arrow direction to the position shown in 1.
  • Page 291 Windshield Washing Liquid and Wiper Blade Replacing Rear Wiper Blade Warning While driving, be sure to clean all vehicle window glass to maintain good vision! ● Clean wiper blade and all windows regularly. ● The wiper blade should be replaced once or twice a year.
  • Page 292 Tire Check the tire pressure (including the spare tire) at Tire Instructions for tire storage least once a week. Make sure the tire is at room Before removing the tire, a mark shall be made on the Defective tires are very dangerous! Do not drive in temperature - as little as 1.6 km of driving will allow tire to indicate the tire rotation direction.
  • Page 293 If the pressure is too high, bleed of BAIC ORV for tire inspection as soon as possible. accidents. If the tire pressure is insufficient, the air by pressing the valve until it reaches the the vehicle will continue to run at high recommended pressure.
  • Page 294 Tire Warning Warning Warning ● Avoid using tire older than six years as much ● If you have to drive over curbs, speed bumps Precautions for off-road driving as possible. If you have to use it, be sure to or similar convex places (such as gravel road Be sure to pay attention to the following drive with extreme caution and at a low with large drop, gravel road and other...
  • Page 295 Tire Hint Hint Warning A suitable amount of home-use washing liquid The purpose of regularly rotating tires is to Rusting or dirt on the wheels or wheel may be added to clear water, and spread in the make all tires wear evenly. connectors will cause the loosening of the lug valve hole to see whether air bubbles are nuts after a certain period of time, thus resulting...
  • Page 296 Hint If the tire wear is uneven (only worn on one side) or excessively worn, you shall go to the authorized dealership of BAIC ORV for wheel alignment. If any of the following situations occurs, tires will need to be replaced: ●...
  • Page 297 If uneven dimension of the tires needed. tire wear is found, the driver shall go to the authorized dealership of BAIC ORV as soon as possible for wheel alignment.
  • Page 298 ● Replacement with used rim for vehicles can lane or a safe place. the original spare parts of BAIC ORV to replace it, also be dangerous. There is no way for you If a rear tire is punctured, you should release the which will ensure that the rim matches your vehicle.
  • Page 299 Consigning your vehicle to the authorized dealership protection BAIC ORV. This may damage the brake parts. of BAIC ORV will help you to contribute to the Material recycling environmental protection by controlling various Nonskid chains not suitable for the snow ground will pollution hazards.
  • Page 300 5 Accident handling Roadside assistance ..............................299 Warning Triangles ..............................299 Spare Tires and Tools ............................300 Replacement of Fuse .............................. 308 Replacement of Bulb .............................. 320 Emergency Startup ..............................321 Emergency tow ..............................322...
  • Page 301 BAIC ORV at 4008108177 shall be set at a place about 50-100 M in the direction The warning triangle is located in the rear floor for help.
  • Page 302 Spare Tires and Tools Spare Tires and Tools Spare Tire 2. Use a tool to raise the lower edge of the spare tire 3. Unscrew the fixing bolt with a double-end cover * at the opening. wrench. The spare tire is located under the spare tire rack of the tail door.
  • Page 303 Spare Tires and Tools 5. Insert the key into the nut and remove the nut by 6. Align the center hole of the replaced old tire with 4. Unlock the buckle under the spare tire cover* and turning the key; Next, remove the other three the stud on the spare tire frame and place it remove the spare tire cover*.
  • Page 304 Spare Tires and Tools Driver's tools Warning ● Do not use spare tires that have been damaged or worn to the limit. ● The spare tire over 6 years old can only be used in emergency and shall be driven carefully.
  • Page 305 Spare Tires and Tools Replacement of faulty tire Warning Warning The dimensions of the emergency spare tires and their ● The wheel nut must be tightened correctly ● Improper use of the jack may cause serious rims of this car are the same as those of the damaged according to the specified tightening torque.
  • Page 306 Spare Tires and Tools Unscrew the wheel nut Warning There are risks when tires are replaced. The vehicle may slide off the jack, tip over or fall upon you or others, thus causing serious injury. Please find a flat and safe place to replace tires. The relevant laws and regulations must be strictly complied with.
  • Page 307 Spare Tires and Tools Hint ● The wheel nut can only be loosened by one turn before lifting the vehicle with jack. ● The wheel assembly wrench can be used to loosen it. Lift vehicle Lift the vehicle by turning the jack clockwise with the As shown in the diagram, first assemble the jack-use assembled tool until the tire is off the ground.
  • Page 308 Spare Tires and Tools Installation of spare tire Note lifting follow-up replacement procedures could only be performed after the nuts of the wheel to be replaced have been loosened. Warning ● The jack must be used on a hard and flat ground.
  • Page 309 ● Check the wheel nut tightening torque as soon as nut tightening torque at the authorized dealership of BAIC ORV as soon as possible. possible. ● When replacing the wheel, if the nut is rusty ●...
  • Page 310 Replacement of Fuse Replacement of Fuse Engine compartment fuse box Battery positive fuse box (gasoline (diesel models) model) Engine compartment fuse box (gasoline model) Hint Hint The positive fuse box of the battery is located on The electrical box in engine compartment is Hint installed on the left front wheel cover assembly, the positive pole of the battery.
  • Page 311 Replacement of Fuse Battery positive fuse box (diesel Fuse box of the dashboard Body fuse box models) Hint Hint Hint The dashboard fuse box is located on the left The body fuse box is located on the left side of side of the turning column under the dashboard, the trunk and behind the access cover plate.
  • Page 312 "engine compartment distribution authorized dealership of BAIC ORV. center layout" or the location diagram on the fuse box cover. Before it is uncertain if a damaged fuse is the...
  • Page 313 Replacement of Fuse Engine compartment fuse box (gasoline model) Functions and Specifications of Engine Compartment Fuse Position Specification Function EF01 EMS B+ EF02 Compressor EF03 Start Feedback EF04 Starter EF05 Reserved EF06 Reserved EF07 Reserved EF08 Oil pump 87 Electrical signal EF09 fuse EF10...
  • Page 314 Replacement of Fuse EF20 Front wiper EF42 Body fuse box Hint EF21 Left front fog lamp EF43 WCBS ● As shown in the figure, there is a spare fuse EF22 Right front fog lamp Built-in relay Compressor in the fuse box. If the fuse on your vehicle is EF23 Horn relay Starter...
  • Page 315 Replacement of Fuse Engine compartment fuse box (diesel models) Functions and Specifications of Engine Compartment Fuse Position Specification Function EF01 EMS B+ EF02 Compressor EF03 Start Feedback EF04 Starter EF05 Reserved EF06 Reserved EF07 Reserved EF08 Oil pump 87 Electrical signal EF09 fuse EF10...
  • Page 316 Replacement of Fuse EF20 Front wiper EF42 Body fuse box Hint EF21 Left front fog lamp EF43 WCBS ● As shown in the figure, there is a spare fuse EF22 Right front fog lamp Built-in relay Compressor in the fuse box. If the fuse on your vehicle is EF23 Horn relay Starter...
  • Page 317 Replacement of Fuse Battery positive fuse box Function specification battery positive fuse Position Specification Function PFB01 200A Alternator PFB02 Reserved Engine compartment PFB03 125A fuse box power supply PFB04 Right fan EPS (electronic assist PFB05 100A turning) PFB06 Left fan...
  • Page 318 Replacement of Fuse Fuse box of the dashboard Function specification dashboard fuse Position Specification Function RF01 Electric sunroof RF02 IG1 relay RF03 Constant power Left front door control RF04 module Right front door RF05 control module Auxiliary Instrument RF06 Harness Constant Electric Electronic differential RF07...
  • Page 319 Replacement of Fuse Position Specification Function Position Specification Function Position Specification Function BDC (Body Domain RRY04 Reserved RF32 Airbag controller IG RF19 Control system) RRY05 Reserved RF33 Gateway IG BDC (Body Domain RRY06 Small relay IG1 relay RF20 Auxiliary instrument Control system) RRY07 Small relay...
  • Page 320 Replacement of Fuse Body fuse functions and specifications Body fuse box Position Specification Function Driver's seat power BF01 supply Driver's seat power BF02 supply BF03 Rear A/C box Second row seat power BF04 supply BF05 Rear defrosting Driver's lumbar support/front BF06 passenger's lumbar support...
  • Page 321 Replacement of Fuse Position Specification Function Hint BF19 Reserved BF20 Reserved ● As shown in the figure, there is a spare fuse BF21 Reserved in the fuse box. If the fuse on your vehicle is RRY08 Small relay Rear wiper relay damaged, you can use the spare fuse to RRY09 Small relay...
  • Page 322 ● The rated voltage of the power supply battery Therefore, we recommend that you go to the batteries must be replaced. authorized dealership of BAIC ORV to replace the must be 12V and its capacity (Ah) should not be bulb.
  • Page 323 Emergency Startup 5. Connect one end ③ of the black cable to the Jumper Cables Warning cathode (-) of battery "B" with electricity supply, To connect batteries via jumper cables, it is necessary and the other end - 4 - to the engine block of Improper use of the jumper cable may cause to connect the positive terminals first and then the battery "A"...
  • Page 324 Emergency tow Emergency tow Vehicle front tow Warning The front and rear parts of the vehicle are both ● Inexperienced driver should never attempt equipped with a towing ring which can be used for to tow other vehicle to prevent accidents. towing things.
  • Page 325 Towing from the front If the vehicle needs to be towed, it is recommended that you entrust the authorized dealership of BAIC ORV or commercial towing company to handle it for you. When you contact them, you must tell them how the vehicle needs to be dragged.
  • Page 326 Emergency tow Dragging from Behind Use of platform vehicle Note Note Do NOT drag the vehicle from the rear when the Be sure to apply the parking brake and fix all front wheels are on the ground. This will four wheels properly to prevent the vehicle from seriously damage the transmission of the vehicle.
  • Page 327 6 Technical data Identification Number ............................326 Vehicle Parameters ..............................330...
  • Page 328 B, and some model data plates are riveted to the right elevation of the engine compartment. Purchasing channels and contact information of the diagnostic instrument: BAIC International Development Co., Ltd. contact@baicintl.com Diagnostic instrument system at present: Accessory code: T19900010...
  • Page 329 Identification Number Engine, gearbox and transfer case Event data recording system Hint coding This vehicle is equipped with an Event Data The purpose of the above is to capture the Recording system (EDR). The main purpose of EDR vehicle state at the time of the incident and is to record some of the vehicle's vehicle states in case to facilitate the investigation of the collision of major collision accident, including the vehicle's...
  • Page 330 Identification Number Beiqi Fotor Motor Co.,Ltd. Model:4F20TC13 EngineCapacity:1.968L Certihcatio WARNING:lnjury may result and warranty is voided iffuel rate, Rated PowerlSpeed:120kW/4000RPM rpm,of altitudes exceed piblished maximumvalues for this model and application. Maximum Torque/Speed:380Nm/(1800-260O)RPM The engine code is engraved on the body of the The transmission code is pasted to the transmission The diesel engine model and code are affixed to the engine.
  • Page 331 Identification Number Vehicle nameplate Manufactured by BAIC Group Off-road Vehicle Co., Ltd Vehicle identification code Brand: Beijing. Model of vehicle: BJ2030V6MBSG Engine model: 4K31 Maximum net power of engine: 185kW Displacement of engine: 1997mL GVW: 2765kg Seating capacity: Manufacture year and month:...
  • Page 332 Vehicle Parameters Vehicle Parameters Item Dimension Total length (mm) 5040 Overall width (mm) 1955 Overall height (mm) 1925 Wheelbase (mm) 2820 ≥215 Minimum ground clearance (mm) Front wheel distance (mm) 1620 Rear wheel track (mm) 1640 Name of parts not included in the overall dimensions of vehicle according to GB1589: side mirror.
  • Page 333 Vehicle Parameters Main models and technical specifications Model of vehicle BJ2030V6M BJ2030V6MBSG BJ2030V61MBSG BJ2030V6NBSG BJ2030V61NBSG Engine model 4K31TD 4K31TD 4K31TD 4F20TC30 4F20TC30 Drive type Time-sharing 4 WD Time-sharing 4 WD Time-sharing 4 WD Time-sharing 4 WD Time-sharing 4 WD Vehicle emission level at the time of delivery National VI b National VI b National VI b...
  • Page 334 Vehicle Parameters Front Wheel Alignment Parameters Brake system 13°24′±20′ Brake pedal’s free stroke (mm) 10~20 Kingpin inclination 5°30′±30′ Kingpin Caster Use limit of front brake lining (not including backboard thickness) (mm) 0°±30′ Extroversion of wheels Use limit of rear brake lining (not 0°9′±3′...
  • Page 335 Vehicle Parameters Engine Parameters Engine model 4K31TD 4F20TC30 Fuel type Gasoline Diesel Form In-line four-cylinder In-line Emission standard National VI (6b) National VI (6b) Cylinder diameter (mm) 81.5 Piston stroke (mm) 95.7 95.5 Displacement (L) 1.997 1.968 Compression ratio 10:1 16.2:1 Rated power (RPM) kW (r/min) 196/5600...
  • Page 336 Vehicle Parameters Consumption and filling amount Front and rear axle gear oil Dosage or filling Usage or injected Brand Name Brand amount (L) amount (L) Fuel tank (gasoline model) 85± 2 Gasoline 92# and Above Front axle GL-5 80W-90 Fuel tank (diesel models) 85±...
  • Page 337 Vehicle Parameters Lamp light source Name Model Specification Front combination lamp (including high/low beam, — position lamp and front turn signal) Rear combination lamp (including position lamp, brake — lamp, backup lamp and turn signal) — High braking light — Daytime driving lights —...
  • Page 338 7 Rescue services Rescue service ................................ 337...
  • Page 339 ● Damages caused by participation in car racing or other activities involving driving at extreme speeds; ● Damage caused by retrofitting of components and parts not approved by BAIC Offroad or retrofitting of the vehicle without permission from BAIC Offroad.
  • Page 340 8 Maintenance information Maintenance Specifications ........................... 339...
  • Page 341 Maintenance Specifications ● Check the engine oil level and fill it as required; Maintenance Specifications Note ● Check the cleaning agent of the windshield and There are two types of Maintenance and Repair fill it as required. Whenever there is component failure or doubt Standards on this vehicle.
  • Page 342 Maintenance Specifications Maintenance and Repair Standards of Category A (Gasoline Models) First maintenance 5,000 km/6 Regular service 10,000km/12 Maintenance Time months (subject to the purchase months whichever comes Additional maintenance Maintenance item invoice), whichever comes first first ● ● Engine oil Replace every 10,000 km/12 months (whichever comes first) Oil pan drain plug ●...
  • Page 343 Maintenance Specifications Maintenance First maintenance 5,000 km/6 Regular service Time months (subject to the purchase 10,000km/12 months Additional maintenance invoice), whichever comes first whichever comes first Maintenance item ○ (Replace when necessary) ○ (Replace when necessary) — Brake Lining Front & real axle —...
  • Page 344 Maintenance Specifications Class B Maintenance and Repair Standards (gasoline model) Maintenance First maintenance at 2,500 km/3 Regular service at Time months (subject to the purchase 5,000km/6 months Additional maintenance invoice), whichever comes first (whichever comes first) Maintenance item ● ● Engine oil Replace it every 5,000 km/6 months (whichever comes first) Oil pan drain plug...
  • Page 345 Maintenance Specifications Maintenance First maintenance at 2,500 km/3 Regular service at Time months (subject to the purchase 5,000km/6 months Additional maintenance invoice), whichever comes first (whichever comes first) Maintenance item Replace parts for every 25,000 km / 12 months (whichever comes first) and ○...
  • Page 346 Maintenance Specifications Maintenance and Repair Standards of category A (diesel models) Maintenance First maintenance 5,000 km/6 Regularly service it every Time months (subject to the purchase 10,000 km/6 months Additional maintenance invoice), whichever comes first (whichever comes first) Maintenance item Replace every 10,000 km/6 months (whichever comes first).
  • Page 347 Maintenance Specifications Maintenance First maintenance 5,000 km/6 Regularly service it every Time months (subject to the purchase 10,000 km/6 months Additional maintenance invoice), whichever comes first (whichever comes first) Maintenance item Replace every 50,000 km/24 months (whichever comes first) Check every ○...
  • Page 348 Maintenance Specifications Maintenance and Repair Standards of Category B (Diesel Models) Maintenance Regular service for 5,000 Initial maintenance: 2,000km Time km/3 months whichever Additional maintenance (Subject to the purchase invoice) comes first Maintenance item Replace every 5,000km or 3 months (whichever comes first), check the oil ●...
  • Page 349 Maintenance Specifications Maintenance Regular service for 5,000 Initial maintenance: 2,000km Time km/3 months whichever Additional maintenance (Subject to the purchase invoice) comes first Maintenance item Replace parts for every 25,000 km/12 months (whichever comes first) and ○ (Add when necessary) ○...