Table of Contents

Advertisement

1
Foreword
Thank you for choosing this car.
This instruction manual applies to all the models of D50 series. Before using the vehicle for the first time, please be sure to read this manual carefully and get
familiar with the vehicle structure, various functions, operation methods and relevant regulations of BAIC as soon as possible. The user will lose the right to
claim because of failed following the instruction of the user manual, or the modification without the approval of BAIC. The contents contained in the
instruction manual will help you learn the correct method of driving and maintenance, so that you can fully enjoy the fun of driving.
This manual aims to provide users with instructions on the use and maintenance of vehicles. Please check the purchase contract for the specific configuration
of the vehicles you purchased. If you have any questions about this car and this manual, please contact BAIC distributor in your country.
The pictures, data and instructions contained in this manual conform to the current product definition. In view of BAIC will continue to modify and improve
the vehicle, the pictures, data and instructions in the operation manual are only for the introduction of the use method, not as a basis for order acceptance.
We will continue to improve all models. Therefore, we reserve the right to change the vehicle, equipment or part of the technical specifications at any time.
Please understand. Data relating to delivery scope, appearance, performance, size, weight, fuel consumption, specifications and vehicle functions are correct
as of the time of delivered. Some of the equipment/functions described in this article may not be installed on your vehicle (unclearly issues please can ask the
local distributor). All information, drawings or descriptions in this manual shall not be deemed as a legal commitment.
BAIC solemnly declares that it is solely responsible for the revision of this manual, and reserves all rights and interests stipulated in the copyright law and the
right to modify.
Without the prior written consent of BAIC, it is not allowed to reproduce, copy or translate any part of this user manual, copy or store this publication in the
public retrieval system, or transmit it by electronic, mechanical record or any other form.
D50

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D50 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BAIC D50 Series

  • Page 1 Thank you for choosing this car. This instruction manual applies to all the models of D50 series. Before using the vehicle for the first time, please be sure to read this manual carefully and get familiar with the vehicle structure, various functions, operation methods and relevant regulations of BAIC as soon as possible. The user will lose the right to claim because of failed following the instruction of the user manual, or the modification without the approval of BAIC.
  • Page 2 Indicate, which means "do not do this" or "do not let this happen." Indicate, which means "please do this" or "this operation is feasible". A similar sign that in order to indicate an item in the diagram. A similar sign indicates the direction of movement or action. BAIC International Development Co., Ltd...
  • Page 3 Notes to users 1. Before you use the vehicle, please be sure to 5. Checking before driving: 8. braking carefully read this instruction manual, in the ●Whether the vehicle lamps and lanterns work ●When the engine is shut off, the vacuum process of using the vehicle comply with the normally;...
  • Page 4 Follow the following important driving rules to help 14. Please go to BAIC dealership for vehicle car as soon as possible, according to this ensure the safety of drivers and passengers repair and modification.
  • Page 5 General Catalogue Safety operation instruction Operating system and equipment Driving Guide Maintenance Emergency treatment Technical Data Maintenance Information...
  • Page 6: Table Of Contents

    Catalogue 1.Safety operation instruction ........008 3. Driving Guide ............133 Safety Driving................009 Start and driving ................134 Seat Belt .................. 014 Parking ..................145 Airbag system ................024 Electric power steering system ............ 148 Children safety ................. 036 Brake system ................
  • Page 7 Catalogue Vehicle cleaning ................212 Main oil specifications and capacity .......... 250 Vehicle corrosion protection ............216 Recycling and environmental protection ........217 7. Maintenance Information ........251 Maintenance specification ............251 5. Emergency treatment ..........218 Maintenance information sheets ..........253 Spare tire and tools ..............
  • Page 8: Safety Operation Instruction

    1. Safety operation instruction Safety Driving ..............009 Possible airbag non-opening conditions ........032 Child safety riding ..............036 General description ..............009 Correct sitting for Driver and passenger........010 child safety .................. 036 Pedal area ..................012 child seat ..................037 Seat Belt ................
  • Page 9: Safety Driving

    "maintenance information table" and go to Properly place all the child passengers Carrying pets safely BAIC brand authorized service center for The children should be properly placed in the When carrying a pet in the car, make sure that regular maintenance, and checking the cars two sides of the back seat, in case of the child is the pet is properly fixed.
  • Page 10 Safety driving Correct Sitting Posture of Driver Adjust the headrest so that the middle of the Warning headrest is flush with the middle of the driver's ●Do not be distracted by external factors, ear and keep the back side of the head as close Correct Sitting Posture of Driver such as smoking, eating, talking with as possible to the headrest.
  • Page 11 Safety driving Front passenger correct sitting posture Warning Warning In order to ensure the safe ride, the front row In order to reduce the risk of accidents ●The front passenger should not be too passenger should do the following: and injuries, the following must be strictly close to the instrument panel, otherwise ●Adjust the seat as much as possible to the airbag will not be able to provide...
  • Page 12 Safety driving Back row passenger correct sitting posture Pedal area ①Accelerator pedal In order to ensure the safe ride, the front row ②Brake pedal passenger should do the following: M/T vehicle ③Clutch pedal ●Adjust the headrest so that the middle of the Caution headrest is aligned with the middle of the rear passenger's ear and the back of the head is as...
  • Page 13 Safety driving Driver position foot mat Warning The foot mat should be fixed in the foot space. ●When the brake pedal is pressed, if it is After installation, please make sure that the foot blocked by the foot mat and other things, mat is close to the carpet, and ensure that there it will affect the vehicle's brake and may is a certain distance between the foot mat and...
  • Page 14: Seat Belt

    Seat belt At the same time, the correct wearing of the seat General Instructions Warning belt is also an important prerequisite for the All seats in the car are equipped with In order to reduce the risk of accidents, protection of the airbag. At the moment of three-point seat belts.
  • Page 15 (such as glasses, pens, etc.), otherwise the be replaced at BAIC Service Center. Even passengers may be injured. if there is no obvious deformation in the ●Make sure that the buckle socket is not...
  • Page 16 Seat belt Seat belt height adjustment Seat belt pre-tightening force limiting Warning function ●The driver is forbidden to adjust the seat Some models’ seat belts are equipped with belt height while driving. pre-tightening force limiting devices, which aimed to ensure that the seat belt fastens the passenger's while crash.
  • Page 17 Seat belt Drive seat belt warning light Co-pilot seat belt warning light* Caution ●The seat belt with pre-tightening function can only be used once. A new seat belt must replaced after pretensioner is detonated. ●When the pre-tightening force-limiting device is triggered, white smoke may be emitted.
  • Page 18 Seat belt Physical principle of frontal crash Caution ●When the driver does not fasten the seat belt, the warning light is on. ●When the vehicle speed is ≥25km/h, the vehicle's continuous driving time is ≥60 seconds or the vehicle's continuous driving distance is ≥500m, and the front passengers are still not wearing the seat belt, the front passenger seat belt warning...
  • Page 19 Seat belt The consequences of not wearing the seat belt Many people think that in the event of a mild crash, you can use your own hands to support the body and will be without injury, it is absolutely wrong. Driver and passengers who are not wearing seat belts will move forward at the speed before the crash due to inertia.
  • Page 20 Seat belt Seat belt lock Fasten front row seat belt Warning ●Do not wrap the seat belt when using the How to Wear a Front Seat Belt seat belt. When the seat belt is wrapped around the body, it will increase the pressure on the body of the seat belt and reduce the protection of the seat belt.
  • Page 21 Seat belt Seat belt adjustment Seat Belt Unfastened Wear the Rear Seat Belt Gently pull the seat belt to adjust the length of Press the red button beside the buckle of the seat The rear seat belts are worn in the same way as the seat belt, and adjust it to a comfortable belt, and the latch will automatically eject.
  • Page 22 At this time, the retractor should lock the seat belt. If the retractor cannot lock the seat If the driver is pregnant, to protect the safety of belt, please go to the BAIC Dealer for the pregnant woman and the fetus, the belt inspection or repair.
  • Page 23 When you need to scrap the pretensioner, you webbing is cracked or otherwise damaged, must abide by the relevant safety regulations. replace the entire seat belt assembly. The BAIC authorized Dealer is familiar with the relevant safety regulations and can provide you with inquiries. Warning ●If the seat belt retractor is repaired by a...
  • Page 24: Airbag System

    Airbag system Active airbags General Instructions In the event of a serious collision, the occupants who are not wearing the seat belt cannot control The airbag system serves as an auxiliary themselves and will move randomly or be protection. In order to fully protect the triggered thrown out of the vehicle.
  • Page 25 In such a case, you must go to an authorized BAIC dealership to arrange a check:...
  • Page 26 ●Do not attempt to repair, disassemble or Please contact BAIC Dealer as soon as possible install the components of the airbag system by yourself. If the airbag system is ●The front airbag has been deployed repaired by non-professional personnel, ●collision occurred in the front of the vehicle,...
  • Page 27 Airbag system Front side Airbags The airbag is provided with a venting hole. Warning When an accident occurs, the airbag is inflated ●It is forbidden for the driver and the and inflated in an instant. After the airbag is front occupant to lean their head or body fully deployed, the airbag begins to deflate, against the door, or to place their arms on thereby reducing the impact damage of the...
  • Page 28 The degree of the inflated side airbag may cause abrasions to Please contact BAIC Dealer as soon as possible damage to the vehicle is not a sufficient the occupants, so keep the correct sitting condition for inflation of the side airbag.
  • Page 29 Airbag system * Side Curtain Airbags Side curtain airbags ○ are located at the side members of the roof. The word "AIRBAG" is marked on the B and C columns In the event of a side collision of the vehicle, the system may trigger a side curtain airbag on the collision side of the vehicle.
  • Page 30 Airbag system When there is some collision in the vehicle, the Warning front airbag, the side curtain airbag, and the ●Side curtain airbags provide additional front seat side airbag may be deployed at the protection only in the event of severe side same time impacts and are not a substitute for seat Caution...
  • Page 31 Please contact BAIC Dealer as soon as possible If the impact is received in the direction of about 30º or so in front of the vehicle and the ●Any of the air curtains has unfolded...
  • Page 32 Airbag system Rear-end collision Side collision Warning ●Be sure to wear the seat belt correctly. Otherwise, in the event of an accident, the deployment of the airbag may cause an impact on the occupant, resulting in serious injury or even death of the occupant Air bags may not be launched The airbag provides protection to the occupants...
  • Page 33 Airbag system Slanted Collision (oblique collision) Rear collision In the event of a rear-end collision with a large When the side other than the passenger truck, the driver instinctively performs an compartment is hit, the vehicle body is weakly When a diagonal collision occurs, the impact emergency braking, at which time the front of collided, and the forward airbag, the side airbag, energy received by the airbag system may not...
  • Page 34 Airbag system Rollover Accident Special Collisions When the front side of the vehicle hits a wall, In the case of a rollover accident, the airbag If the vehicle collides with some finer objects the body is weakly collided, but the collision may not be deployed, and the passenger may not such as poles or trees, in which the collision strength does not reach the airbag deployment...
  • Page 35 Airbag system The collision at bottom of the vehicle Vehicle crossing the pit The vehicle falls or flies over the stairs If the vehicle is subjected to severe impact such as flying over a step, impacting a shoulder or a hard object, or crossing a deep pit, even if the deformation of the vehicle is slight, the vehicle component is affected by the rigidity, and the...
  • Page 36: Children Safety

    Car safety for children When carrying multiple children Children safety ISOFIX child safety seat fixtures are available on the seats on either side of the rear of the Warning vehicle for up to 2 ISOFIX child safety seats If the child has grown to fit the seat belt, the ●Don't let children stand or lie on the seat ●Never allow children to enter the oldest child can be placed in the front passenger...
  • Page 37 Car safety for children Child seat Caution It is recommended to carry the instruction ●The installation and use of the child seat manual of the child seat with the vehicle should be in accordance with the traffic Warning regulations child seat manufacturer's instructions.
  • Page 38 Car safety for children Child seat classification level (for reference Group I Child seat Group Ⅱ Child seat only) Group 0/0+ Child seat For infants or young children under the age of 4 For children under the age of 7 and weighing and weighing between 9kg and 18kg, it is best between 15kg and 25kg, it is best to use a For infants under 18 months and weighing less...
  • Page 39 Car safety for children Correctly install the child seat Group Ⅲ Child seat Warning Before installing the child seat in the rear seat, ●The upper part of the seat belt must pass the front seat must be adjusted to the through the middle of the shoulder width, appropriate position according to the size of the and in any case cannot pass close to the...
  • Page 40 Car safety for children ISOFIX device of safety seat There are 2 ISOFIX devices in each side of the Caution rear row seat. ●The “ISOFIX” sign close to the headrest For each fixed device has two fixed buckle at The upper fixed device can be only used the bottom of the rear seat and 1 fixed device to fix the ISOFIX safe seat.
  • Page 41 Car safety for children The place to fix the ISOFIX safe seat Location to fix Category Size Category Fixing Unit Front Passenger seat Side seat in the back Middle seat in the back ISO/L1 IL** Infant portal bed ISO/L2 IL** ISO/R1 0 Group:<10kg ISO/R1...
  • Page 42: Safety Label

    Warning sign Warning sign The location of warning sign is the same as the picture : Airbag warning sign ●The airbag warning sign is on the front and back side of the sunvisor for front passenger; ●Warning sign for cooling fan is in the right side of front engine cabin crossbeam;...
  • Page 43: Operating System And Equipment

    2 Operation System and Specification Instrument and operation system ........ 045 Power window ................096 Power sunroof * ................. 098 Instrument and the layout of operation system.. ( AT )..... 045 On/Off for combined light ............101 Instrument and the layout of operation system ( MT) ....047 Light Control ................
  • Page 44 Stereo system and diagnostic socket ........128 Navigation and multimedia stereo system* ..........128 Sound compensation system for high speed and vibration.....128 Driving recorder ..................128 Smart system * ..................128 Diagnostic socket ...................128 Accessory and modification ..........132 Accessory and modification ..............132...
  • Page 45: Instrument And Control Mechanism

    Instrument and control system Instrumentation and control mechanism (Automatic transmission models) 1. High Volume Speaker 2.Vent to defog/defrost for the windshield 3. Vent for A/C 4. On/Off for the Combined headlights 5. Cruise control and setting buttons 6. Combined Instrument 7.
  • Page 46 Instrument and control system Instrumentation and control mechanism (Automatic transmission models) 15. Hazard warning switch 16. Multimedia control panel 7. 12V outlet 18. Gear lever 19. Electronic parking brake switch 20. USB port 21. Accelerator pedal 22. Brake pedal 23. Start/stop button OFF 24.
  • Page 47 Instrument and control system Instrumentation and control mechanism (Manual transmission) (Mechanical brake) 1. High-pitch loudspeaker Defrosting/defrosting outlet windscreen side 3. Air conditioner vent 4. SWITCK Column 5. Dash board Controls 6. Combination dash board 7. Sound system controls 8. Wiper switch 9.
  • Page 48 Instrument and control system Instrumentation and control mechanism (Manual transmission) (Mechanical brake) 14. AC Console 15. Hazard warning switch 16. Multimedia control panel 17. 12V outlet 18. USB port 19. Gear lever 20. Accelerator pedal 21. Brake pedal 22. Start/stop buttons OFF 23.
  • Page 49 Instrument and control system 1. High-pitch loudspeaker Instrumentation and control mechanism (Manual transmission)(EPB)* 2.Defrosting/defrosting air outlet on windscreen side 3. Air conditioner vent 4. SWITCK Column 5. Dash board Controls 6. Combination dash board 7. Sound system controls 8. Wiper switch 9.
  • Page 50 Instrument and control system Instrumentation and control mechanism (Manual transmission) (EPB)* 14. AC Console 15. Hazard warning switch 16. Multimedia control panel 17. 12V outlet 18. USB port 19. Gear lever 20. Electronic parking brake switch AIRBAG 21. Accelerator pedal 22.
  • Page 51 Instrument and control system Instrument (5 inches) * 1. Adjustment button(INFO ) 2. Fuel meter 3. ECU display 4. Engine coolant thermometer 5. Adjustment button(RESET ) 6. Engine tachometer 7. Speedometer 8. Indicator and warning light...
  • Page 52 Instrument and control system Engine coolant thermometer Engine tachometer Speedometer The meter indicates the temperature of the Engine tachometer indicates the number of It shows the real-time speed of the car in km/h. engine coolant. The indicator should be in rounds the engine runs per minute(x1000rpm).
  • Page 53 Instrument and control system Fuel gauge Caution Trip Computer Display Screen ●Don’t run the car to the complete (5 inches)* using-up of the fuel. Abnormal supply of the fuel may lead to poor ignition. The unburnt fuel entering into the exhaust device will damage the catalyst converter! The fuel gauge indicates the remaining fuel volume in fuel tank.
  • Page 54 Instrument and control system Subtotal mileage 1 Subtotal mileage 2 Average fuel consumption 1 Subtotal mileage 1 can accumulate the mileage Subtotal mileage 1 can accumulate the mileage Average fuel consumption indicates the volume in a certain distance, the range of which is in a certain distance, the range of which is of the fuel it consumes in unit running distance.
  • Page 55 Instrument and control system Average fuel consumption 2 Instantaneous fuel consumption Maintenance mileage Instantaneous fuel consumption display the In the display of average fuel consumption 2 Maintenance mileage represents the mileage the average fuel consumption at one moment during surface, average fuel consumption 2 reading can car will run before the next maintenance the running, the unit is L/100Km.
  • Page 56 Instrument and control system Range Total distance Tire pressure information ODO: displays the total distance traveled by a The tire pressure information shows the tire According to the existing driving mode and fuel vehicle, with a range of 0km ~ 9999999km. pressure state of the vehicle tire.
  • Page 57 Instrument and control system 3. After about 4 seconds, the tire pressure The tire pressure monitoring alarm light flashes The clock display at the Hz frequency for 60 seconds, then display on the meter display and the tire remains bright and beeps 5 times. When the pressure monitoring alarm light on the dial will stop flashing.
  • Page 58 Instrument and control system Instrument Cluster Warning, Indicator Light (5 inches) * 1. Electric power steering system (EPS) fault alarm light 2. ESP off indicator 3. ABS fault alarm light 4. ESP work / fault indicator 5. Left turn indicator 6.
  • Page 59 Instrument and control system 17. Idle start and stop system work indicator 18. Idle start and stop system does not work / fault indicator 19. Engine anti-theft indicator 20. Engine compartment / luggage compartment / four-door unclosed indicator 21. Transmission oil temperature high alarm light 22.
  • Page 60 Instrument and control system Combination meter (7 inch) 1. Fuel gauge 2. Driving computer display 3. Engine coolant temperature gauge 4. Engine tachometer 5. Speedometer 6. Indicator lights and warning lights Please transfer to the parking P mode...
  • Page 61 Instrument and control system Engine coolant temperature gauge Engine tachometer Warning ●Do not open the sub-tank assembly cover until the engine has cooled to normal temperature. Because of the high temperature, hot coolant and steam will eject, causing a safety accident. The tachometer indicates the number A of ①The table indicates the temperature of the revolutions per minute of the engine nd (X1000...
  • Page 62 Instrument and control system Speedometer Fuel gauge Instrument operation button Please transfer to the parking P mode speedometer shows vehicle's When the start/stop button is in the "RUN" : Confirm/Reset instantaneous speed in km/h mode, fuel gauge 2 indicates the amount of : Return Menu remaining fuel in the fuel tank.
  • Page 63 Instrument and control system Subtotal mileage average fuel Subtotal mileage average fuel Trip computer screen (7 inch) consumption 1 consumption 2 Subtotal mileage 1 is the mileage after the Subtotal mileage 2 is the mileage after the subtotal odometer is cleared. Display range: subtotal mileage odometer is cleared.
  • Page 64 Instrument and control system Travel time / average speed consumption When the start/stop button is in “RUN” mode, The travel time is the accumulated running time The cruising range is based on the driver's press the key MENU to the meter setting from the time when the travel time is cleared to driving habits in the previous paragraph.
  • Page 65 Instrument and control system Is the tire pressure normal? Alarm volume Set the unit When the meter indicates that the tire pressure is abnormal, check the corresponding tire. If the tire is inflated or replaced, confirm that the tire is under normal tire pressure. Press and hold the button for 5 seconds on the tire pressure menu interface to perform system reset learning.
  • Page 66 Instrument and control system High speed mode Normal mode Fatigue driving After selecting “High Speed Mode” in the menu, After selecting "Normal Mode" in the menu, After selecting “Fatigue Driving” in the menu, press the button ENTER the high speed mode press the button ENTER the normal mode press ENTER to enter the fatigue driving setting.
  • Page 67 Instrument and control system Maintenance information Fault view Restore Factory The maintenance information shows the mileage After selecting "Restore factory" in the menu, When the alarm message is displayed on the that was taken from the next vehicle. The first press the ENTER button the factory reset.
  • Page 68 Instrument and control system Combination meter indicator and warning light (7 inch) 1. Engine system fault warning light 2. Body security indicator 3. Tire pressure monitoring warning light 4. Left turn indicator 5. Blind area monitoring indication / fault light* 6.
  • Page 69 Instrument and control system 18. ABS fault warning light 19. Low fuel warning light 20. Radar system fault warning light* 21. Lighting system fault indicator* 22. Engine anti-theft indicator 23. Electric Power Steering System (EPS) Fault Warning Light 24. Maintenance reminder indicator 25.
  • Page 70 ●If the warning light is on during driving, nearest 4S shop as soon as possible. you should contact the BAIC Dealer Store Esp off indicator DG (yellow)* for inspection as soon as possible. If no...
  • Page 71 Instrument and control system Driver seat belt is not equipped with warning Configured as mechanical parking: Warning Indicates the status of the parking system. When light A (red) ●Turning on the ESP system during this light is on, it indicates that the mechanical This light indicates the driver's side seat belt normal driving can help improve the parking has been pulled up.
  • Page 72 Instrument and control system Front passenger belt is not warning light C When the start/stop button is in the "RUN" Airbag system fault warning light D mode, this light is on for self-test, after self-test (red)* (red) Annihilation. After the self-test, if the indicator This light indicates the front seat occupant's seat When the start/stop button is in the “RUN”...
  • Page 73 Instrument and control system Brake system fault / brake level low warning If the warning light does not go out or lights up Body anti-theft indicator D (red) during driving, it indicates that the ABS system light (red) When the start/stop button is in the “RUN” is faulty.
  • Page 74 Instrument and control system This warning light illuminates when it is not The alarm pop-up displays “High engine water Battery charging fault warning light D extinguished after self-test or during driving, temperature” with a beep (7- inch meter). In this (red) indicating insufficient fuel.
  • Page 75 Instrument and control system Lane departure warning system fault alarm Idle start and stop system work indicator (only Warning for some models) D (green)* indicator (only for some type vehicle) ●When the speed is km5km/h, if any door When the start/stop button is in the “RUN” (red) opened, audible...
  • Page 76 (7-inch meter). If the warning light is on during speeded, please pay attention” and accompanied This light indicates the alarm information of the driving, please contact the BAIC dealer for by a tone. When the vehicle speed drops below ESCL system. When this light is on, the inspection.
  • Page 77 Open and close Steering wheel Caution ●Do not violently adjust the steering Adjust steering wheel position wheel up and down without loosening the lock handle, which may result in damage to parts. Warning ●Do not adjust the steering wheel position while the vehicle is running to avoid accidents.
  • Page 78 Open and close Multifunction steering wheel Cruise and instrument setting buttons* Sound system control button * : Turn the cruise control on or off ; The multifunction steering wheel is equipped Sound system control button (* Intelligent with the following function buttons: :...
  • Page 79 For the specific functions of the audio system The vehicle equipped with the keyless start/ stop BAIC dealer as soon as possible to re-adjust the control buttons, please refer to the audio system function is equipped with two smart keys.
  • Page 80 Open and close Open the door with a mechanical key Caution Intelligent remote control keys contain ●Do not attach objects (such as metal mechanical keys, which are used in emergencies. films) that interfere with electromagnetic If the power of the intelligent remote control waves to remote control keys.
  • Page 81 Open and close Wireless remote control Notice Tips ●Check and confirm that all doors are ●After continuously pressing unlock/lock, the door lock protection firmly locked. function will be triggered, and the unlock The following are some examples of pressing function will temporarily fail. the lock key when the door is not closed: ●If any door (4 doors) is not closed, press the lock key, the door will not be locked, and the...
  • Page 82 Open and close Unlock the door Open the trunk of the car Car search function Press the unlock button on the key to unlock the When all doors are locked, four doors are When the car is in the defensive state, within the trunk cover for more than 1 second and unlock unlocked after pressing the unlock key, and the distance of less than 15m (open space), press the...
  • Page 83 Open and close Battery replacement Replacement of remote key batteries Notice When the power of the intelligent remote ●Make sure that the positive and negative control key is insufficient, the driving computer poles of the remote key battery are will remind the battery to be replaced. The key installed correctly.
  • Page 84 If the smart remote control key still does not work properly, please contact BAIC 4S Store. Keyless access and start-up system 2. Unlock the lock card on the key battery cover...
  • Page 85 Open and close Key reminder function Anti-theft alarm system Smart key left inside car Your car is equipped with body anti-theft system and engine electronic anti-theft system. For the When an intelligent key is left in the car sake of car safety and operation convenience, (excluding the trunk area), when any door is we strongly recommend that you read this open to the four doors closed, another intelligent...
  • Page 86 The method of relieving the burglar alarm still cannot activate the anti-theft alarm function. pump relay when it receives the car collision Please go to BAIC 4S Store for repair to avoid state after triggering: signal and stop supplying oil to the car's oil the loss of property in the car due to the ●Press the unlock key on the remote control key...
  • Page 87 Open and close Central door lock key Description of Central Door Lock After all doors are locked, each door can still be The control button of the central door lock is opened separately in the car. When the doors on System located on the glass lifting switch panel of the either side of the four doors are open, it is...
  • Page 88 Open and close Open the door from the car Automatic unlock function Thermal Protection Function of Door Lock When the speed of the car reaches 20km/h (the Motor speed value can be set by setting items on the If the door locks are locked and unlocked for multimedia display screen), the door will be seven consecutive times (the interval is less than locked automatically.
  • Page 89 Open and close Reminder of four doors and two covers not When the door, engine cover and trunk cover Child safety lock closed properly are not closed, the 5-inch meter shows that the door is open, and the 7-inch meter shows that the corresponding door is not closed.
  • Page 90 Open and close Engine cover Tips ●In order to prevent the accident caused Open engine cover by the unintentional opening of the rear door by children in the car, it is recommended to lock the children safely when carrying them. ●When the door is locked in the child safety lock, even if the door has been unlocked, it can only be opened from...
  • Page 91 Open and close Close engine cover Warning 1. Check and confirm that there are no other ●If the engine cover is placed back too far foreign bodies in the engine compartment in from the upper part of the front grille, or order to prevent the car parts from being if the engine cover is forced down, the damaged.
  • Page 92 Open and close Trunk Emergency opening of trunk cover Open the trunk Use remote control key Trunk Notes The trunk cover can be unlocked by pressing the unlock button on the remote control key. Warning Use multi-function switch in car ●During driving, trunk cover should be The trunk cover can be unlocked by pressing the kept closed.
  • Page 93 Open and close Close the trunk Notice Warning 1. Gently press the trunk cover close to the rear ●When there are too many items in the ●When using the trunk, the following bumper. trunk to confirm whether the items will notes should be observed.
  • Page 94 Open and close In order to ensure the performance of the car, Fuel filler door unleaded gasoline that meets the requirements of this car must be used. (92 # and above) When filling the fuel, slowly unscrew the nozzle counterclockwise. Before completely The opening switch of the refueling port is...
  • Page 95 BAIC 4S ●This car is equipped with catalytic ●When the fuel filling is completed, make Store to thoroughly clean the fuel system.
  • Page 96 Open and close The electric window control switch is located Lifting Control of Driver Side Window Electronic windows at the door arm of the driver's side. Pull up the switch ① and hold it. The driver's side window glass rises and stops immediately Warning after release.
  • Page 97 Open and close Driver's Lifting Control of Passenger Side Lift ban switch of passenger side window: Warning Window ●Don't leave children or people with mobility problems alone in the car! They may inadvertently touch switches or controllers, leading to serious accidents. ●Please pay attention when closing the window glass to prevent it from hurting others.
  • Page 98 Open and close Control switch of passenger side window: Sliding open/close of electric skylight Electronic windows* The ON/OFF button is in "RUN" mode. Long press or touch the "SLIDE OPEN" button, the Electric skylight switch skylight opens and runs to the maximum position.
  • Page 99 Open and close Skylight Anti-clip Function Warning Warning Close the skylight by touching the button. At ●Be careful when closing the skylight. ●The skylight may stop monitoring the this time, the skylight has anti-clip function. Make sure that no one is in the open and obstacles in the position that is about to be Anti-clip function can prevent large items from closed skylights to avoid serious injuries...
  • Page 100 Open and close Lifting ventilation on/off Sunroof manual initialization and self – Sunroof visor The start/stop button is in "RUN" Mode. When learning The sunshade can be opened with the sunroof, the sunroof is in the closed state, long press or In some cases (after a sudden loss of battery but manually pull the sunshade back to close touch the "TILT UP"...
  • Page 101 Lights and views Head lamps Light combination switch Control the lamp Control the lamp ① Light control knob The start/stop button is in "RUN" mode , turn the ② Fog light control knob light control knob so that the light control knob Turn the light control knob so that the light ③...
  • Page 102 Lights and views Far-light warning Steering signal Tips Pull the light control lever down to the bottom, Pull the light control joystick toward the ●When the low light is on, the vertical and the external left-turn light and the left-turn steering wheel plane, and the far light will be lit.
  • Page 103 Lights and views Fog lamp control Manual adjustment of headlamp height , the rear fog light is lit, At the same time, the fog light control knob will return to. If you want to turn off the rear fog light, turn the fog light control knob again to In the case of simultaneous opening of front and rear fog lamps, the fog lamp control knob shall be turned...
  • Page 104 Lights and views Backlight brightness adjustment Danger warning light switch Location "0" applies to drivers or drivers and front row passengers (without luggage) Location "1" applies to all seats full Location "2" is suitable for all seats full, and the luggage compartment distributes load evenly (reaching the allowable axle load of the rear axle and not exceeding the maximum allowable...
  • Page 105 Lights and views Emergency Brake Signal 3. When an emergency. Interior Lights 4. When towing another vehicle or being towed. When the speed of the vehicle exceeds 50 km/h When the danger warning light switch is pressed and emergency braking occurs, the brake lamp Front reading light * down, all the steering lights will flicker at the will flicker ;...
  • Page 106 Lights and views Front reading light (with sunroof switch)* Cabin light Door open light function Press the switch , will open the door to turn on the light function. When the start/stop button is in "RUN" mode, open any door and the front reading light will light up.
  • Page 107 Lights and views Intermittent time adjusting knob: Rotate this Wiper combination switch When the start/stop button is in RUN mode, the wiper and scrubber can work. If the start/stop knob to adjust the wiping interval of the front button is not in "RUN" mode during the wiper wiper.
  • Page 108 Lights and views Windshield washing Interior Rearview Mirror Tips ●In order to ensure traffic safety, the Manual anti-glare interior rearview mirror * "blind area" of visual angle should be Before driving a vehicle, the inside rearview minimized when adjusting rearview mirror should be adjusted to obtain the best mirror.
  • Page 109 Lights and views Adjustment of Rearview Folding Rearview Mirror * Exterior Rearview Mirror Outside rearview mirror has the functions of Turn the adjusting knob to the position, electric adjustment, electric heating and electric and the outside rearview mirrors on both sides folding.
  • Page 110 Lights and views External Rearview Mirror Heating * Manual Folding of Outside Rearview Tips Mirror * ●External rearview mirror and rear windshield heating can only work when the engine is running. Notice ●Do not turn on the heating function of the rearview mirror without special necessity, so as to avoid overheating of the rearview mirror and the rear windshield...
  • Page 111 Lights and views Flip the side visor Cosmetic mirror Visor Flip the visor down Open the cosmetic mirror cover on the sunshade, First turn down the sunshade, then remove the you can use cosmetic mirror. hinge on the right side of the sunshade from the clip, and then turn the sunshade to the window Driver side shade and front row occupant side Warning...
  • Page 112: Seats And Storage

    Seats and storage devices Manual adjustment of driver's seat Seat Notice Correct seat adjustment ensures full protection ●After adjusting the seat position, try to of seat belt and airbag system. move the seat cushion and backrest back Warning and forth to ensure that the seat is locked reliably.。...
  • Page 113 Seats and storage devices Electric adjustment of driver's seat * Backrest angle adjustment: Pull the adjusting handle ③ upward , and shake the back of the seat to the appropriate inclination angle at the same time; loosen the adjusting handle ③ ,and shake the back slightly back and forth until the back is locked reliably.
  • Page 114 Seats and storage devices Manual adjustment of front seats Back seat Back seat folding If large items need to be placed in the car, the back of the back seat can be folded to increase the storage space of the luggage compartment. Pre-folding preparation Move the front seat forward to the right position;...
  • Page 115 Seats and storage devices Head pillow Seat Headrest Adjustment After folding the rear seats, it can maximize the Folding recovery: storage space in the car. 1 、 Move the seat belt to the outside, then push the seat back into position. Swing the seat back Headrest adjustment of front seat and forth to ensure reliable locking.
  • Page 116 Seats and storage devices The seat heating * Tips ●If you need to remove the headrest, press and hold the lock button to remove the headrest completely。 Warning ●It is strictly prohibited to remove the headrest for driving, or it will cause serious injury to people in the accident.
  • Page 117 Seats and storage devices Storage box on interior panel of driver's side Storage Facilities Glove box door Warning ●Flammable and explosive materials are prohibited in the vehicle. Such as gas lighters, spare gasoline, alcohol, beer, etc. Especially in the hot summer, the car temperature is very high, will cause sealed container explosion or cause fire.
  • Page 118 Seats and storage devices Cup Bracket with Emergency Start Mark Front central armrest inner storage box * Press the switch on the central armrest to open the central armrest storage box (EPB)* Cup holder with emergency start sign * Inner storage box with front central armrest (EPB model)* Two cup holders are arranged behind the shift handle for placing beverage bottles or sealed tea...
  • Page 119 Seats and storage devices 12V Power Supply and USB Interface (Robot front-row interface supports Warning Brake Type) multimedia playback mobile phone ●Improper use of power sockets and charging, and the USB interface with mobile electrical equipment may result in fire phone logo can also be used for car life mobile and serious injury.
  • Page 120: A/C And Heater System

    A/C system General descriptions Tips A/C system is a device to realize the cooling, ●To keep A/C system in good condition, dehumidification, heating, ventilation and air make sure it runs some time a week (even purification of the air in the car. in winter).
  • Page 121 A/C system Air Conditioning Control Panel (manual)* 1. Temperature Control 2. Mode Switch 3. Air Regulation 4. OFF 5. A/C 6. External Loop 7. Internal Loop 8. Defrost Mist-FR 9. Defrost Mist-RR...
  • Page 122 A/C system Air Conditioning Control Panel (Auto)* 1. Temperature Control 2. Mode Switch 3. Air Regulation 4. OFF 5. A/C 6. AUTO 7. External Loop/Internal Loop 8. Defrost Mist-FR 9. Defrost Mist-RR...
  • Page 123 A/C system 1. Temperature Control Only wind model internal/external 7. Internal Loop ( A/C-Manual ) Adjust the temperature of the outlet, up to raise the screen is changed to “External-loop' loops Screen is changed to “Internal-loop” and the the temperature, down to lower the temperature. function can be showed and the indicator light indicator light of internal loop button is on.
  • Page 124 A/C system It is recommended not to manually turn off A/C, Press the button to defrost and mist the rear The operation of the air-conditioning system windscreen and the button to adjust the otherwise it will affect the efficiency of fog puts an extra load on the engine.
  • Page 125 A/C system Rapid cooling Used in conjunction with a heater, it can also Outlet heat and dry the air inside the vehicle. Start the engine, turn on the air conditioner and This setting applies to most driving conditions adjust the temperature to the minimum, and when the external temperature is above zero.
  • Page 126 A/C system A/C maintenance Air purification function Central outlet The A/C system is completely hermetically Some models have the function of air sealed and maintenance shall be performed by purification. When the engine starts, the central qualified technicians. control screen display PM2.5 To keep the system in optimal condition, make...
  • Page 127 A/C system Side outlet Adjust the air outlet on both sides of the instrument panel to change the wind direction. Counterclockwise rotation of the outlet edge knob can open the outlet. Turn the knob on the edge of the outlet clockwise to close the outlet.
  • Page 128: Audio System And Diagnose Interface

    Sound system and diagnostic interface Navigation multimedia sound Intelligent vehicle system * Automobile data recorder* system * Some models are equipped with intelligent onboard systems, please refer to the manual. Diagnostic interface 1. One button to take a picture Some models have navigation and multimedia 2.
  • Page 129 Sound system and diagnostic interface Taking pictures: Through the one-key camera Digital Video Recorder, DVR is a vehicle The DVR uses a MicroSD card, which is driving information recording system. Its main installed in front of the left side of the internal button on the steering wheel and the App's function is to collect the front visual and audio rearview mirror and on the left side of the...
  • Page 130 Sound system and diagnostic interface ●Taking pictures ● Set the DVR Notice Tap the screen in the main interface and the Click enter the DVR setting interface ●Due to the slight delay in the real-time floating menu pops up at the bottom of the Recording duration: recording...
  • Page 131 Sound system and diagnostic interface Notice Notice ●To ensure data security, ●The DVR directly plugs and unplugs the recommended to change the password as SD card, which may cause the loss of soon as possible. recording contents in the current period. ●If the user forgets to change the In order to ensure the integrity of password, the system can be restored to...
  • Page 132: Accessories And Refitting

    Accessories and modifications It is forbidden to install other high-power Accessories and modifications Warning electrical appliances other than those Be sure to consult the 4S shop before installing ●Improper attachment or modification of configured in the original vehicle accessories or replacing parts. Recommended the airbag system can weaken the use of our approved accessories and parts.
  • Page 133: Driving Guide

    3. Driving Guide Start and driving ............134 Hydraulic brake assist..............155 Hydraulic brake booster .............. 155 Running in ................134 ESP ....................155 Matters needing attention ............135 Cruise control .............. 157 Start/stop button ............... 136 Transmission ................140 Constant speed cruise Settings ...........
  • Page 134: Start And Driving

    Start and driving Start and driving Running-in engine Running in tires and brake Notice of running-in The engine can prolong the service life and Drive at a moderate speed for the first 500km, reduce the oil consumption. The new engine running the new tires well.
  • Page 135: Matters Needing Attention

    Start and driving Attention before driving Warning The following points should be noted before ●The new tires and brake linings do not driving: have the best adhesion and friction and ●Make sure all Windows, outside rearview must be driven carefully within the first mirrors and outside lights are clean.
  • Page 136: Start/Stop Button

    Start and driving Start / stop button If the button is not pressed: start / stop button is Tips off, which is the "OFF" mode (button’s ●Automatic Transmission: The shift lever background light does not shine); in the "P" or "N" gear position, depress ●If the button is pressed once: the "RUN"...
  • Page 137 Start and driving Manual Transmission: While starting the engine "Please Set to P/N Gear to Start" and the Start the engine when the Start/Stop button is in the "OFF" mode, Start/Stop button will jump to "ACC" mode. Press start / stop button to start engine if the brake pedal is not pressed down, the When stop or turn off the car, press the start / Within the effective scope of the smart key, the...
  • Page 138 Start and driving Smart key standby activation function Tips Warning If the vehicle is in a strong signal interference Scope of application of alternate start ●Do not run the engine for a long time in area, battery intelligent function: a poorly ventilated place or closed room. remote-control key is low, use the standby start ●Intelligent remote-control key battery Because of the poisonous gas in the engine...
  • Page 139 Start and driving Equipped with automatic transmission, step on Emergency stop method Notice the brake pedal, stop the vehicle, put the shift For the vehicle equipped with start/stop button, ●If the engine is difficult to start, the time lever in the position of N, apply the parking when the engine cannot normally flameout, for the starter to run continuously during brake, and then put the shift lever in the position...
  • Page 140: Transmission

    Start and driving When in the "N" gear position, the transmission Transmission 3. When parking, press on the brake pedal, stop the vehicle, apply the parking brake, and place is not locked, at this time, the brake pedal or the the shift rod in the "P"...
  • Page 141 Start and driving When the manual shift mode needs to be Notice Warning withdrawn, the shift lever is pulled to the right ●According to the change of resistance ●In the course of driving, do not suddenly and hung to the "D" gear. At this time, the (such as traction, climbing the long slope, switch the shift handle to "R"...
  • Page 142 Start and driving Sport mode Gear Shift Rod Display Application of Automatic Transmission drivers unfamiliar with automatic transmission, the following information is particularly important. Starting ●The engine can start only when the shift rod is in "P" or "N" gear. ●Stay on the brake pedal before starting the Please transfer to engine.
  • Page 143 Start and driving Vehicle of Manual transmission Starting and parking 1. Check and make sure the gear is in neutral. Warning 2. Put the clutch pedal down and start the ●The speed of cold engine is very high engine. when it is first started, so please be careful 3.
  • Page 144 Start and driving Hang Reverse gear 1. Stop the car. 2. Press on the clutch pedal and keep for 3-5 seconds, the shift handle is hung into the "R" gear position. 3. After hanging gear, loosen the clutch pedal slowly. Press on the accelerator pedal to release the parking brake, and the vehicle will go reversing.
  • Page 145: Parking

    Parking Parking safety attention Do not park the vehicle on inflammable materials such as dead leaves or hay, otherwise Warning the high-temperature engine or exhaust pipe Warning ●It is strictly forbidden to leave in the car may ignite such inflammable materials and for a long time when the vehicle stops ,...
  • Page 146: Parking Method

    Parking Parking way 1. Stop the vehicle and apply parking brake to confirm the reliability of parking brake. 2. For automatic transmission vehicle, shift handle is placed in "P" gear position. For manual transmission vehicle, according to the safety needs of parking position: Put the shift handle in the appropriate gear position (flat ground: neutral;...
  • Page 147 Parking Turn the wheel to the side of the road when the front of the car is facing the uphill or downhill road and there is no stone along the road.
  • Page 148: Electric Power Steering System

    Electric power steering system General description Notice Notice Electric Power Steering System (EPS) can ●After replacing the steering column and ●When the steering system fails, please provide steering power under various driving steering gear or re-positioning the four contact special service station conditions according to the speed of the vehicle...
  • Page 149: Brake System

    Brake system General descriptions Warning Brake system mainly includes : ●When a vehicle is running normally, 1. Four-wheel disc brake has good thermal Warning don't put your foot on the brake pedal, stability. which will inadvertently push down the ●After wading, the braking effect must be 2.
  • Page 150 Brake system 3. Mountain Environment 5. Ice and snow weather Factors Influencing Braking Effect Because of the high frequency, long time and Because of the low friction coefficient of ice 1. Abrasion continuous working under high-intensity and snow pavement, the braking distance will The wear of brake linings depends on the be greatly extended when braking, and the braking conditions, these factors will make the...
  • Page 151 Brake system In order to ensure safety, a safer driving method Brake wear indicator* Brake system fault alarm lamp should be used, and greater force should be The brake lining block is equipped with wear If the brake system fault alarm lamp is on exerted on the brake pedal when braking to tow sound indicator.
  • Page 152: Parking Braking System (Manual)

    Brake system The parking brake control handle is placed at Parking brake system (mechanical Electronic parking brake system the lowest position, the parking brake is brake type)* (EPB)* released and the parking brake indicator light in the combined instrument is extinguished. Warning ●In order to prevent accidental movement of vehicles, after parking, the parking...
  • Page 153 Brake system Secondary application of electronic parking: Automatic Removal of Electronic Parking Notice In some special cases, by placing the start/stop First, make sure the door is closed and the ●If parked on a larger ramp, the button in the "RUN" mode and pulling the driver fastens his seat belt.
  • Page 154: Abs

    Brake system ABS Anti-lock braking system Notice Warning ABS brake anti-lock braking system can prevent ●The function of ABS brake anti-lock ●When in the parking state, do not wheels from locking when braking. This system braking system has certain limitations. quickly press on the accelerator pedal, can help drivers to better control the direction of Developing good driving habits is the...
  • Page 155: Ebd

    Brake system ABS Fault alarm lamp The ramp start assistance can work together ESP Electronic Stability Program with the idle start-stop function of the engine. ESP electronic stabilization system can improve If the ABS fault lamp alarm is lit during Hydraulic Brake Assistance the running process, it indicates that the ABS vehicle driving stability, for example, when...
  • Page 156 Brake system ESP Indicator light ESP Functional closure Warning If the ESP indicator flashes during the driving ●Electronic stabilization system (ESP) has process, it represents that the ESP system is some limitations on vehicle driving currently performing stable adjustment work. stability control.
  • Page 157: Cruise Control

    Cruise control Setting speed Cruise* Cruise start Warning General description ●When driving on heavy traffic roads, Vehicle constant speed cruise system is a system windy areas, rough roads, wet and that uses electronic program to control the slippery roads such as rain, snow, ice, etc., throttle to keep the vehicle running at constant do not use the constant speed cruise speed automatically.
  • Page 158 Cruise control 4. Loosen the accelerator pedal and the vehicle Release the button, will be in accordance with Overtake enters the cruise control state. the new set speed to achieve automatic cruise. When overtaking is required, press on the Reduce cruise speed Increase cruise speed accelerator pedal to accelerate and exceed the cruise speed (as usual overtaking).
  • Page 159 Cruise control Suspend Cruise Resume cruising Cancel cruising Suspend Cruise after temporary lifting of cruise, When the cruise function is turned on, press the The following four operations will temporarily when the speed is higher than 40 km/h, push cancel the current cruise, but the speed memory key of the main switch of the cruise to will not be erased.
  • Page 160: Tpms

    Tire pressure monitoring system Tire Pressure Information (5-inch General description Instrument)* Tire pressure reset This vehicle use the indirect tire pressure monitoring system, through wheel speed signal When tire pressure display is abnormal, the user received by ESP indirectly monitors whether the must choose safe area nearby to stop and check tire pressure is normal or not.
  • Page 161 Tire pressure monitoring system Tire Pressure Information (7-inch When tire pressure display abnormal, the user At this time, the tire pressure is normal If stop flickering, the tire pressure display on the Instrument)* must choose the safe area nearby to stop and instrument display screen is still in alarm state, check the tire.
  • Page 162: Parking Radar And Reversing Camera System

    Parking radar and reversing image system When there are no obstacles behind the vehicle, Parking Radar System Starting Conditions of Rear Parking no color segments are displayed. ZONE2, The parking radar system is a safety assist Radar ZONE3 and ZONE4 are pre-warning zones , device when parking or backing a car.
  • Page 163 Parking radar and reversing image system Distance screen Color Fault Alarm Instructions for Parking Warning 0~30cm Radar System ●Parking radar system is just a parking 30~60cm yellow Radar fault warning assist system, and the driver still needs to 60~150cm green attention surrounding environment in the process of reversing.
  • Page 164: Reverse Imaging System

    Parking radar and reversing image system Reversing Image System When the vehicle shift exits the R-gear, the Notice rear-view camera stops working and the A reversing camera is installed on the outside of ●If drops of water are covering the multimedia display screen returns to the the trunk lid of the car.
  • Page 165 Parking radar and reversing image system Description of reversing image system The condition that affects the view effect of Failure reversing When the reverse image is on, if the system checks fault information, the multimedia display screen displays accordingly fault reminding interface.
  • Page 166 Parking radar and reversing image system Reversing at night In night, reversing the car without reversing light...
  • Page 167: Panoramic Imaging System

    Panoramic image system Panoramic Image System * 1. Panoramic view controller 2. Panoramic view front camera 3. Panoramic view rear camera 4. Panoramic view left camera 5. Panoramic view right camera 6. Panoramic view system switch 7. Lane departure warning switch...
  • Page 168 Panoramic image system Panoramic Image System * AVM including the function as follow AVM SYSTEM SWITCH Panoramic image system is a comfort system, ●360°overview image On the left dashboard, there is a panoramic which consists of four CMOS wide-angle The controller seamlessly stitches the images of image system switch.
  • Page 169 Panoramic image system AVM System turn on and off Conditions ⑤ press start/stop key to "OFF “or "ACC" AVM system interface operation model Turn condition: The vehicle is in R gear, and the screen is the When the start/stop button is in "RUN" mode or note :...
  • Page 170 Panoramic image system MOD Mobile Object Recognition Tips Panoramic image system can recognize moving ●Functions are only used to help drivers objects in camera images. When the system drive safely, not belong to the vehicle detects moving objects in images, the system driving safety system, only play an will do the corresponding.
  • Page 171 Panoramic image system LDW * Start condition Alarm model The panoramic image system uses the camera to When the start/stop button is located at "RUN" The system can provide icon visual alarm and detect the lane line. vehicle has been started and the speed is greater continuous sound alarm When the vehicle is detected to deviate from the than 60 km/h, it can be started by any of the...
  • Page 172 Panoramic image system When the driver's intention to deviate from the Start and turn off starting conditions: Tips lane is detected, the alarm is forbidden by the When the start/stop button is in "RUN" mode or ●Functions are only used to help drivers system.
  • Page 173 Panoramic image system Detection range Function configuration Tips ●The system can recognize only four-wheel Users can configure BSD's on and off in the ●Careful diversion. This function is only vehicles. main interface used to help drivers drive safely. It is not a No alarm is given to vehicles driving in the vehicle driving safety system.
  • Page 174: Idling Start- Stop System

    Idle speed start-stop system * Idle speed start-stop system * When the start/stop button is in "RUN" mode, Preconditions for Idle speed start-stop the idle start/stop function is turned on by Under certain conditions, the idle start-stop the Idle start-stop function is on ; system will automatically extinguish the engine.
  • Page 175 Idle speed start-stop system * 15. Steering wheel is in normal position Idle start-stop operation method Notice When preparing to start again, the engine can When the engine is in idle start-stop state, start automatically as long as the brake pedal is once the following situation occurs, the loosened.
  • Page 176: Driving Skill

    Driving skills Driving Safety Check interior of the Vehicle: Before Starting the Engine It is best to carry out safety checks before Check and confirm that the lock and buckle can Exterior of the Vehicle driving. Spending just a few minutes on be fastened.
  • Page 177 Driving skills After Starting the Engine Key Points of Driving In Different Situations In the manual mode of CVT vehicle, when the When there is rain, please drive carefully vehicle is driving on rough road or braking in Before driving: because the visibility is low, the vehicle emergency, the vehicle may temporarily quit Fuel leakage :...
  • Page 178 Driving skills When driving across road with water If you need to go through the waterlogged road, Driving in winter please pay attention to the following matters: ●Before wading, we should correctly estimate Notice Warning or know the depth of wading and the ●Please note the water waves caused by the characteristics of the area.
  • Page 179 Do not use the constant speed 4. Make sure the battery in good performance cruise function. 5. For different driving destinations, BAIC ●When winter comes, please go to BAIC suggests that some necessary emergency items authorized Store vehicle winter should be carried.
  • Page 180 Driving skills While driving: Parking: Braking precaution For automatic transmission models, if the When parking on flat ground, put the shift Do not use the brake pedal as a footrest. If you engine is started in a low temperature handle into "P" (automatic transmission) or put your foot on the brake pedal while driving, environment for a long time (such as the whole neutral (manual transmission)
  • Page 181 Drive carefully. If the brakes are not working properly, park the car safely and contact BAIC dealership for assistance.
  • Page 182 Driving skills Fuel-efficiency drive ●Reasonable use of air conditioning, but also to Notice Fuel-efficient driving not only saves fuel, but reduce the use of high-power audio and other ●Make sure the parking brake is released also is an environmentally friendly way to drive. high-power electrical equipment.
  • Page 183: Maintenance

    4. Maintenance Maintenance ............... 184 tire choose and replace ............... 208 treatment of puncture ..............210 overview ................184 wheel rim replace ............... 211 periodic maintenance ............. 184 anti-slip chain ................211 daily maintenance ..............184 Vehicle clean .............. 212 Engine compartment ..........
  • Page 184: Maintenance

    BAIC dealership regular can be carried out in the BAIC dealership. Maintenance divided into regular maintenance. maintenance and daily maintenance. Regular...
  • Page 185 Please repair the fuel system ●Prior to routine maintenance work, the tools left in the engine compartment. in the BAIC dealership. vehicle should be parked in a safe area, Items left behind can cause engine failure ●Do not allow sparks, flames or sparks flat and capable of carrying the ground, or damage, and even cause fires.
  • Page 186 Maintenance External daily maintenance Internal daily maintenance Tire Door and Hood Acceleration pedal Before a long journey, carefully check the tires Check the opening and closing of all doors, for damage, cracking or excessive wear, and Check whether the operation of the accelerator engine hatches and trunk covers.
  • Page 187 If the wiper leaves scratches after oil level with the engine oil gauge. Steering wheel scraping, please go to BAIC dealership to Leakage replace the wiper blade immediately. Check the steering wheel for excessive free After the vehicle stops for a period of time, Windshield fluid travel, heavy steering or other abnormal noise.
  • Page 188: Engine Room

    5. Middle decorative cover 6. Engine decorative cover Notice ●It is suggested that users should not disassemble the engine cabin cover plate by them to avoid unnecessary damage. If you need to disassemble and assemble, please go to BAIC dealership.
  • Page 189: Layout

    Engine compartment 1. Glass washer tank Engine Compartment Layout(Remove Oil filler cover) 2. Oil dipstick 3. Oil filler cover 4. Brake fluid tank 5. Radiator cover 6. Coolant tank cover...
  • Page 190: Safety Instruction

    Please ●Do not in the engine overheating, such as to support the vehicle with appropriate submit all work to BAIC dealership. Improper checking and adding oil in the engine supports. In this case, it is not appropriate work can lead to injury.
  • Page 191: Engine Coolant

    Engine compartment Engine coolant Coolant level check Coolant high temp indicator (red General instruction color) The coolant can play the role of anti-corrosion, If the indicator on during driving, that means anti-cavitation corrosion leakage, engine temp is high anti-radiator boiling, anti-scale and anti-freezing, which can make the cooling system always in Warning the best working state and ensure the normal...
  • Page 192 Coolant replace Warning Please refer to the "maintenance information ●Before engine cooling, do not open the table" for regular replacement of the engine cooling system radiator pressure cover, coolant, please go to BAIC dealership for because this time coolant replacement.
  • Page 193: Engine Oil

    When purchasing engine oil, please check should shut down the engine, contact BAIC whether the model specification on the outer dealership for maintenance of engine lubrication...
  • Page 194 Engine compartment Oil check level Add oil Check level by dipstick : Park your vehicle on flat, firm ground Start engine and warm up until engine temperature reaches normal operating temperature (about 5 minutes) Turn off engine and wait at least 10 minutes for engine oil to flow back to sump.
  • Page 195 Put away the cloth and clean the area around the BAIC dealership to remove the excess oil information sheet. filler. Please go to BAIC dealership to change the engine oil. Warning If the vehicle is driving in adverse conditions, ●Engine oil is a highly flammable such as: substance .Care must be taken when...
  • Page 196 ●It is a very professional job to deal with engine and good lubrication. ●Wash thoroughly if oil is on your skin. waste oil. It is suggested that the BAIC ●Do not mix engine oil of different models ●Do not add any other additives to the dealership for recycling.
  • Page 197: Brake Fluid

    ●Avoid contact with brake fluid on skin contact BAIC dealership for maintenance of the Warning eyes. contact occurs, rinse brake system.
  • Page 198 Warning regularly according maintenance ●Do not mix brake fluid of different information table. Please go to BAIC dealership brands or models, and do not use waste for brake fluid replacement. brake fluid, so as not to reduce braking Warning efficiency and cause braking system failure.
  • Page 199: Battery

    Be sure to read the battery friendly manner. instructions carefully before Dispose batteries starting the operation! environmentally friendly manner. Battery charging will produce Send the exhausted battery to the explosive gas mixture! BAIC dealership or a special waste battery recycling point.
  • Page 200 We therefore suggest that 3. Check and make sure that there is no damage to the authorized BAIC dealership for charging before the cold season starts you should check to the insulation layer of the battery positive the battery.
  • Page 201: Maintenance

    If not absolutely sure, ask an authorized BAIC dealership to carry out the relevant maintenance. When replacing the battery, make sure the...
  • Page 202: Window Scrubber And Wiper

    If you add enough washing liquid, and the wind Warning window cleaning system is still not work, please ●When performing maintenance on the contact authorized BAIC dealership Adding Windshield Washing Liquid engine compartment, be absolutely sure to inspection maintenance. Compliance with operational regulations.
  • Page 203: Wiper Blade Replacement

    If this happens, please go to the 1. Lift the wiper arm away from the windscreen. washer, you shall Check whether the authorized BAIC dealership for check and wiper blades are frozen. You can operate adjustment of the orientation angle.
  • Page 204 Windshield washing liquid and wiper blade Warning While driving, be sure to clean all vehicle window glass to maintain good vision! ● Regularly clean the wiper blade and all vehicle window glass. ● The wiper blade should be replaced one or twice a year.
  • Page 205: Tire And Wheel

    If the wheel nut is often loose, replace the pressure, please do not drive, and contact the wheel and wheel nut authorized BAIC dealership as soon as possible for repair. Warning If the vehicle in the process of running in the ●The tire cannot continue to drive after...
  • Page 206 Tires and wheels How to Check Tire Pressure? Tire information label Check the tire pressure Use the pressure gauge to check the tire General remark pressure when the tire is cold. The correct tire pressure can prolong the service life of tires. It can also ensure the best combination of driving comfort, fuel economy and drivability.
  • Page 207 ●If a tire wear is not uniform or excessive 2. Press the tire pressure gauge to the valve with insufficient, the vehicle continues to run wear, should go to authorized BAIC force, and then the tire pressure will be at high speed, the tire will continue to dealership for wheel positioning.
  • Page 208: Tire Choose And Replace

    Tires and wheels Selection and replacement of tires Warning ●Rusting or dirt on the wheels or wheel Buy New Tires connectors will cause the loosening of the lug nuts after a certain period of time, thus resulting in the falling-off of wheels and traffic accidents.
  • Page 209 Tires and wheels Tire replacement Notice Warning If any of the following situations occurs, tires ●After changing the tire, The tire pressure ●Tires can age over time even if they are will need to be replaced: needs to be adjusted to the standard value not used.
  • Page 210: Treatment Of Puncture

    Tires and wheels Winter tires It is recommended to use winter tires of the When Encountering Tire Puncturing same size as the original tires , and all four Once tire puncturing is encountered, the wheels must be replaced. phenomena that occur and the suggested Tips In winter, the installation of winter tires can measures for coping with them are as follows:...
  • Page 211: Wheel Rim Replace

    Such rims may suddenly break down and cause an accident. If you need to replace rims, be sure to use BAIC’s new and original rims.
  • Page 212: Vehicle Clean

    Cleaning of vehicle Cleaning of external surface of vehicle ● If any contaminant such as soot, bird dung, Notice resin, granular metal or dead insect is left on ● Don’t use any strong domestic soap or surface of vehicle body, the surface paint may Cleaning of vehicle strong chemical detergent to clean up the get damaged.
  • Page 213 Cleaning of vehicle Clearing of stains Manual cleaning Please clear away the asphalt on vehicle bottom When cleaning up the vehicle, please comply and oil stain, chemical contaminant, dead insect, with the following notices: oil or juice dripped from tree on other locations ●...
  • Page 214 In winter or spring, please inspect the vehicle bottom for corrosion protection and sealing. If necessary, please get the vehicle repaired by the authorized dealer of BAIC.
  • Page 215: Internal Clean

    Cleaning of vehicle Cleaning of inside of vehicle Foot mat No matter which kind of foot pad is used, please Wiping of glass in vehicle make sure that it is suitable for the vehicle and is correctly and reliably fixed; otherwise the When wiping the glass in vehicle, please don’t operation of pedal may be affected.
  • Page 216: Vehicle Corrosion Protect

    If there is any sand, in some areas. Please consult with the contaminant or salt, please flush the bottom authorized dealer of BAIC. with water as soon as possible. Most common factors for corrosion of vehicle Notice ●The wet dirt or debris is accumulated in cavity...
  • Page 217: Recycle And Environment Protect

    Recycling and environmental protection Environmental protection Collection and environmental protection If you entrust the authorized dealer of BAIC to maintain the vehicle, the pollution can be Recycling of materials controlled, and you will make contribution to environmental protection. Plastic Discarded or Damaged Parts Plastic and rubber parts are properly marked in Don’t randomly throw those parts.
  • Page 218 5. Emergency handling Spare wheel and on-board tools ..........219 Tools attached with vehicle ..............219 Warning triangle ..................220 Spare wheel ..................221 Replacement of faulty wheel ........... 222 Replacement of fuse ... 227 Main fuse box of engine compartment ..........229 Specification and function of main fuses ..........229 Fuse box for instrument board .............231 Specification and function of instrument panel fuse ......231 Replacement of bulb ..............
  • Page 219: Spare Wheel And On-Board Tools

    Spare wheel and on-board tools Tools attached with vehicle Warning ●The improper use of jack may cause serious injury. ●The jack is a lifting device provided for replacement of wheel under emergency circumstances. It may not be used to support the vehicle for long time, and only one wheel may be lifted up every time.
  • Page 220: Warning Triangle

    Warning triangle Expansion and placement of warning triangle The placement distance of the warning Warning triangle triangle Location of warning triangle Open the two flanges of the warning triangle (1 and 2) when in use Then lock the buckle at the upper side. The Normal warning triangle locates in the tools box that High way...
  • Page 221: Spare Wheel

    Spare wheels and tools Spare wheel 4 Remove the spare wheel by unscrewing the 3 Lift the trunk floor mat up and remove the special-shaped retaining screw in the center of Spare wheels is placed under the trunk floor mat, tool box the spare wheel counterclockwise please follow the below steps to remove it when...
  • Page 222: Replacement Of Faulty Wheel

    Defective wheel replacement Remove the damaged wheel. Notice Warning ● The rim and tire dimensions of the ● Wheel replacement is dangerous and spare wheel may differ from the damaged can cause serious injury or death when wheel. When the spare wheel is installed, the vehicle slides off the jack assembly, the vehicle's handling will change.
  • Page 223 Defective wheel replacement 3. Rotate the jack rocker so that the head notch Loosen faulty wheel retaining nut with wheel Notice of the jack is at the support point of the body, nut wrench counterclockwise ●Make sure the jack assembly jacks up but do not jacking the vehicle.
  • Page 224 Defective wheel replacement Install spare wheel Warning ●Strictly observe the jack operation notes. Warning ●Do not jack up the vehicle other than the specified support point ●Do not use spare wheels that have been ●Do not use pad blocks above or below damaged or worn to the limit.
  • Page 225 Defective wheel replacement Use the wheel nut wrench to tighten the wheel 1. Align the spare wheel to the hub of the wheel 2. Install all the wheel nuts, tighten all the wheel retaining nut clockwise. Do not use any other nuts by hand first, and then tighten the wheel Notice tool, such as hammer or barrel, and make sure...
  • Page 226 In the process of driving, control the speed reasonably to avoid rapid acceleration and emergency braking, and go to BAIC service station as soon as possible to check and ensure that the wheel nut meets the...
  • Page 227: Replacement Of Fuse

    If there is still a fault, please contact the BAIC service station for diagnose and reparation. The dashboard fuse box is located on the lower The engine cabin fuse box locates at the right left side of the dashboard.
  • Page 228 At this time should prohibit the use of faulty electrical equipment, keep the burnt fuse at its place, and contact BAIC service station for maintenance.
  • Page 229: Main Fuse Box Of Engine Compartment

    Fuse replacement Engine compartment fuse box Engine compartment fuse box fuse specification and function. Specific Protection circuit ation PF01 125A Generator EF02 30A Start power EF03 40A High-speed fan EF04 40A Blower EF07 30A EPB R EF08 40A ABS EF09 Reserved EF10 30A Low-speed fan...
  • Page 230 Fuse replacement Specific Protection circuit Specification Protection circuit ation ERY10 Low beam headlight EF23 15A TCU relay EF24 25A ABS Valve ERY12 Fuel pump relay EF25 30A EPB L ERY13 Driving chain R2 relay EF27 15A High beam headlight EF28 Reserve EF31 10A Brake switch power...
  • Page 231: Fuse Box For Instrument Board

    Fuse replacement Dashboard fuse box Dashboard fuse box fuse specification and function Specific Protection circuit. ation RRY- 01 Rear window heater replay RRY- 02 Reverse lamp relay RRY- 03 Rear fog lamp relay. RRY- 04 DRL relay RRY- 05 ACC relay RRY- 06 IG1 Relay RRY- 07...
  • Page 232 Fuse replacement Level Protection circuit Level Protection circuit Level Protection circuit RRY- 11 Front left fog lamp relay RF17 15A Reserved RF36 7.5A Rear fog lamp RF01 30A Front left window RF18 Reserved RF37 10A Front right fog lamp RF02 30A Front right window RF19 Reserved...
  • Page 233: Replacement Of Bulb

    It is suggested to Tips go to BAIC dealership to replace the bulb. ●Fuses may be slightly different for Notice different models, please check in the actual car ●The bulb may be very hot when it just ●Some...
  • Page 234 Bulb replacement Bulb size Lamp name Model Specification Number Light color Front turning light PY21W 21W/12V One for each side Amber Front position light 5W/12V One for each side White Day running light One for each side White Low beam headlight 55W/12V One for each side White...
  • Page 235: Jump Start

    Jumper start Jumper start Tips Warning If the engine cannot start due to excessive ●The capacity of the battery in this ●Never charge a frozen battery - there is a discharge of the battery, the battery of other vehicle is 5Ah. risk of explosion! Even the defrosted vehicles can be used to start by bonding the storage battery, in the charging process,...
  • Page 236 Jumper start When operation the jumper start, the positive 1. Turn off the START/STOP button. Notice pole must be connected firstly, after then Connect one end of the red cable -1- to the ●When connecting or disconnecting the connect the negative pole. positive pole (+) of the power off battery "A".
  • Page 237 Jumper start Warning If the jumper cable is not used properly, it may cause the battery explosion, may seriously injuring people. ●Engine cabin is a high risk area, improper operation can easily cause casualties ●Do not connect the negative end of the jumper cable directly to the negative pole of the faulty battery, otherwise the spark generated at the moment of cable...
  • Page 238: Emergency Towing

    Emergency traction. Vehicle front traction Emergency traction. Towing of vehicle from front If the vehicle is towed when driving (front) When vehicles need traction, they must obey wheel to be towed, for manual transmission, traffic laws. Improper traction equipment can should be in neutral gear;...
  • Page 239 Emergency traction. Insert the wheel nut wrench into the front tow Tail traction hook. Warning hook until it reaches the limit position ●Inexperienced drivers should Tips attempt to tow other vehicles to prevent ●After towing, unscrew the front hook in accidents.
  • Page 240: Towing Of Vehicle

    Using Flat Rescue Vehicle Notice If the vehicle needs to be towed, it is ●Vehicle towed must turn on hazard recommended to find a BAIC car special warning lights and comply with traffic dealership or a professional vehicle road rescue regulations.
  • Page 241 Vehicle tow Towing from the front Towing from the rear Release the parking brake, lift and fix the front Release the faulty vehicle parking brake, lift and wheel fix the rear wheel, and fix the front wheel to the small scooter Notice ●When lifting the front wheel of the faulty vehicle, make sure that there is a proper...
  • Page 242 6. Technical data Identification code ..............243 Vehicle Identification Code and Product Label ........243 Engine and transmission models (MT models) ........244 Engine and transmission models (CVT models) ........244 Vehicle parameters ..............246 Size parameters ..................246 General technical characteristics ............247 Main oil specifications and capacity ........250 Emergency towing ................238 Main oil specifications and capacity ............250 Senova D50...
  • Page 243: Identification Code

    Identification code Vehicle identification code and Vehicle identification code (VIN) is the unique identification code of a vehicle, which is reflected in the front and rear of the vehicle. The T h e l e f t s i d e o f t h e l o c k h o l e o f t h e B - C o l u m n I n n e r P l a t e L o w e r L e f t f r o n t d o o r h i n g e ( V I N ) s u i t c a s e c o v e r (VIN)
  • Page 244: Engine And Transmission Models (Mt Models)

    Identification code The engine model A is located on the engine Engine model and transmission model Engine and transmission model(MT Type) housing which is at the installation of the starter. The manual transmission model B is located on the transmission housing which is at the starter mounting.
  • Page 245 Identification code Engine Model A is located on the engine Engine model and transmission model(CVT Type) housing at the installation of the starter. CVT transmission model C is located on the rear cover of the transmission. C VT Tr a ns mi s s i o n t yp e ○...
  • Page 246: Vehicle Parameters

    Vehicle parameters Size parameters Dimension unit : mm...
  • Page 247: General Technical Characteristics

    Vehicle parameters General technical characteristics Model code Vehicle mode BJ7151C4DMB BJ7151C4DMB ﹣ BSG BJ7151C4DCB BJ7151C4DCB ﹣ BSG Vehicle length mm ) 4630 Vehicle width ( mm ) ( Without rear view mirror ) 1820 Vehicle height (no load) 1480 Wheelbase ( mm ) 2670 Front wheel tread (...
  • Page 248 Vehicle parameters General technical characteristics Mode code Vehicle mode BJ7151C4DMB BJ7151C4DMB ﹣ BSG BJ7151C4DCB BJ7151C4DCB ﹣ BSG curb weight(kg) 1215 1215 1240 1240 Front axle load / rear axle load under curb 712/503 712/503 740/500 740/500 weigh ) Maximum allowable total mass(kg) 1615 1615 1640...
  • Page 249 Vehicle parameters General technical characteristics Vehicle code Vehicle mode BJ7151C4DMB BJ7151C4DMB ﹣ BSG BJ7151C4DCB BJ7151C4DCB ﹣ BSG Maximum climbing degree ( % ) Maximum speed(km/h) Front Wheel camber Front wheel -0.37°±30´ wheel Rear wheel -1.5°±30´ alignment Kingpin Front wheel 13.6°±30´ parameter inclination angle Kingpin...
  • Page 250: Main Oil Specifications And Capacity

    Vehicle parameters The main oil specification and capacity Oil name Specifications Full vehicle filling capacity Engine oil SN 5W/30 3.1L CVT Transmission lubricant CVTF-EX1 4.35 ~ 4.45L Manual transmission lubricant MTF P- Ⅱ 75W/85 1.575 ~ 1.625L Coolant for Ethylene Glycol Engine freezing fluid≤ ﹣ Coolant )...
  • Page 251 Maintenance specification 7. Maintenance information Maintenance specification ............251 Maintenance specification ..............252 Maintenance Information Table ..........253 Maintenance Information Table ............253...
  • Page 252 Maintenance specification ●Driving slowly in urban areas with high Maintenance information temperatures above 32 degrees Celsius and Maintenance of this vehicle can be divided into traffic congestion, more than 50% of the total "general conditions use" "harsh driving time. conditions of use". Please carry out the ●Driving at 50 km/h or more in a high appropriate maintenance according to the temperature environment above 30 °C, driving...
  • Page 253 Maintenance Information Table Maintenance of 5000km/6(vehicle Regular maintenance purchase invoice shall Regular maintenance project 5000km / 6 months, Additional notes prevail) months for the whichever comes first first time, whichever comes first Replacement is required for every 2500km under Engine Oil/Oil Filter ●...
  • Page 254 Maintenance Information Table Regular maintenance Maintenance of 5000km/6 5000km / 6 months months(vehicle purchase (distance from last Regular maintenance project invoice shall prevail) , Additional notes whichever comes for the first maintenance ), times whichever comes first Clean at intervals of 10000km/6 months; Air filter element of air conditioner —...
  • Page 255 Maintenance Information Table Regular maintenance Maintenance of 5000km/6 5000km / 6 months months(vehicle purchase (distance from last Regular maintenance project invoice shall prevail) , Additional notes whichever comes for the first maintenance ), times whichever comes first If abnormal abrasion, cracking, bulging, scratching, scalding and oil seepage of rubber hose are found, it Radiator, brake, exhaust and fuel lines and needs to be replaced.
  • Page 256 Maintenance Information Table Regular maintenance Maintenance of 5000km/6 5000km / 6 months months(vehicle purchase (distance from last Regular maintenance project invoice shall prevail) , Additional whichever comes for the first maintenance ), times whichever comes first Parking brake ○ ○ Check the appearance of four-wheel shock absorber and shock absorber spring, check whether the chassis fastener is loose, if...

This manual is also suitable for:

Bj7151c4dmbBj7151c4dmb-bsgBj7151c4dcbBj7151c4dcb-bsg

Table of Contents

Save PDF