Page 1 Operation Instruction...
Page 3 Table of Contents Thanks for your choice....1 Open tailgate............24 Set tailgate height..........26 Preface..............1 Load..............26 Notes to users............1 Close tailgate............28 Prompt message.............3 Graphical Information..........4 Enter vehicle........ 31 Access of the User Instructions......4 Copyright Statement..........5 Open the door............31 First driving beloved car....5 Take a vehicle......
Page 4 Table of Contents A/C air outlet............88 Important Instruction.........182 Bluetooth compatible cell phone......89 Voice assistant............90 Automobile data recorder........186 Media center............92 ETC system*............189 Gallery..............94 Electric Power-assisted Steering system....190 OTA upgrade............94 Park Assistance......192 Panoramic image system........95 Vehicle setting............97 Parking Distance Control........192 System set............99 Multi-View Camera...........194 Scene Mode............100 Blind spot monitoring system......196...
Page 5 Table of Contents Lighting inspection and replacement....229 Fuse..............229 Battery..............241 Wheel & Tire............243 Vehicles parked for long periods of time...247 Software upgrade..........247 Gasoline Particulate Filter........247 Recycling and environmental protection...249 Emergency Treatment....251 Emergency Rescue..........251 Event data recording system......259 Drag and tow............259 Technical Parameters....
Page 6 Thank you for your purchase. of the publication or launch date. Some equipment/features mentioned The Owner's Manual is applicable to the BJ30e series models. Please herein may not be installed in the vehicle (for more details, please read this Operating manual carefully before first use to get familiar consult an authorized dealer of Beijing Automotive).
Page 7 Do not run the engine for a long time in a closed warehouse accordance with the specified power connection locations and to prevent exhaust gas poisoning. wiring methods. Please go to a BAIC authorized dealer for such • When the battery is depleted, the engine electronic control operations.
Page 8 For vehicle repairs and modifications, please go to 11. Tips on safety: BAIC authorized dealers. BAIC authorized dealers have the Complying with the following important driving rules will tools, diagnostic equipment, repair information and qualified help effectively protect the personal safety of the driver and staff required to inspect, repair and maintain vehicles.
Page 9 Thanks for your choice Graphical Information The direction of rotation or movement. The labels, symbols, and images in the User Instructions are for illus- trative purposes only and should be used as references. Equipment marked with "*" is only applicable to some models or indicate Marks function is only used as an optional part or function of certain...
Page 10 Computer end: https://www.beijingauto.com. cn/chexing.html Mobile end: https://www.beijingauto.com.cn/wap/chexing.html Copyright Statement Without the written authorization of BAIC Motor Co., Ltd., copying, storage, or dissemination in electronic or any other form is prohibited. © Copyright BAIC Motor Co., Ltd. External of the vehicle 1.
Page 11 First driving beloved car Interior Inspection Instrument panel I n s t r u m e n t c o n t r o l buttons* A/C air outlet L i g h t i n g c o m b i n a t i o n handle Combination Instrument Wiper combination handle...
Page 12 First driving beloved car Hood opening handle 10. Left side switch group of dashboard 11. Steering wheel adjusting lever 12. Brake pedal 13. Gearshift handle 14. Keyless start/stop button 15. Front-row cup holder 16. Glove box 17. All-terrain driving mode switch knob 18.
Page 13 First driving beloved car Switch, exterior mirror regulator Window glass lift switch Passenger’s window lifting disable switch Door central lock switch 8 | First driving beloved car...
Page 14 First driving beloved car Top control buttons Driver side reading lamp Interior light switch sunshade switch multi-view sunroof switch Door lamp switch F r o n t p a s s e n g e r s i d e reading light Emergency rescue switch Hazard Warning Light...
Page 15 Trip preparation Check before travelling the terminals are corroded or loose, and whether the cable connections are in good condition. It is best to conduct a safety inspection before setting off on the Interior of vehicle vehicle, A few minutes of inspection will help drive safely, These •...
Page 16 Trip preparation Pay attention to check whether there are any abnormal noises in and for corporate vehicles, choose "Enterprise Vehicle the vehicle. The certification results can be viewed in "Certification Result Query". Authentication operation The following operations need to be performed before using the Attention vehicle remote control function.
Page 17 If after scanning, the mobile phone prompts that the login is successful, but there is no response on the car terminal, please go to a BAIC authorized dealer for processing. Every time you use any car control com¬mand in "remote Vehicle remote control function mode", you will be prompted to enter the password.
Page 18 Trip preparation Status query In the intelligent vehicle control interface, click the control button of the corresponding function to turn on the corresponding remote After the car owner enters the "Beloved Car" interface, the control function of the vehicle. vehicle status page is displayed by default. Vehicle Preparation The current page mainly displays data related to vehicle In addition to the above, it also displays the start and stop status...
Page 19 Trip preparation Turn on the A/C remotely Yueyequan APP. Select the seat that needs to be heated in the A/C control interface. After the seat heating function is activated, it can be You can remotely Start and close the A/C through the Yueyequan APP switched among the following gears: and set the following functions: •...
Page 20 Vehicle unlock Seeking car by Intelligent key remain in the current position. Vehicle search button • When the vehicle is in a fortified state, short press this button, and the prompt for searching car. Unlock button • Short press this button to unlock the door lock.
Page 21 D o n o t p u t t h e s m a r t k e y w i t h a d e v i c e t h a t e m i t s electromagnetic waves, such as a mobile phone. • If the smart knob is lost, please contact a BAIC authorized dealer as soon as possible to re-adapt the smart knob to avoid Warning vehicle theft.
Page 22 Vehicle unlock windows > Doors. Keyless entry ON/OFF options can be set. environment for a long time. • Near television towers, power plants, gas stations, radio stations, area of about 1.5 m of the front door handle of the vehicle, and unlock large display screens, airports or other facilities that generate the door lock.
Page 23 Vehicle unlock off the smart entry function to avoid battery loss of the smart Mobile phone bluetooth key unlock knob. • If the smart entry function is OFF in the center console and you need to use this function, just turn it on again. If the smart entry My Car function is temporarily turned off by other means, it can be restored after opening and closing the door once.
Page 24 Vehicle unlock You can only use your phone’s Bluetooth key after authenticating your text message and can use the Bluetooth key of the mobile phone to phone as follows: control the authorizer's vehicle. Download and install the Yueyequan APP with your mobile The Bluetooth key can authorize multiple people at the same time.
Page 25 Improper operation unlock, and turn it clockwise to lock when replacing the battery will damage the key. It is recom- mended to go to a BAIC authorized dealer for replacement. If you replace it by yourself, you need to use CR2032 lithium battery.
Page 26 Vehicle unlock Warning Attention • When installing the smart key battery, • Please do not touch the remote be careful not to bend the electrodes, control circuit board, otherwise static and there should be no dust or oil in electricity may be generated, thus the battery box.
Page 27 > Doors and windows > contact the BAIC authorized dealer. making it convenient for the driver to lock Doors. The following settings can be made all doors.
Page 28 Vehicle unlock After the vehicle comes to a complete stop, When opening the door from inside the car Attention placing the “Keyless Start/Stop” button in in the locked state, pull the door handle the “OFF” mode will automatically unlock twice. Pulling it once unlocks the door, •...
Page 29 Vehicle load Open tailgate Pinch protection system The electric back door is equipped with 0pen the tailgate by the smart knob button an an- ti-pinch function. When the back door triggers the anti-pinch function, the combination instru- ment panel will display the message “back door encounters an and a buzzer alarm.
Page 30 Vehicle load Open tailgate by the physical buttons • Standstill opening: When carrying Attention the smart key and entering the 0.5m induction area of the electric back door, • After the vehicle is started, the tailgate the high-lev- el brake lamps will go on. cannot be opened/closed through the Stand still for more than 5s, and the switch when it is not in P gear.
Page 31 Vehicle load Load • During the opening process of the Setting via center console tailgate, the taillight will flash as a Trunk storage space reminder. Trunk bottom storage compartment Set tailgate height Set via physical buttons Click the vehicle settings button on the center console >...
Page 32 Vehicle load Trunk top storage compartment Tailgate storage hooks are located on the tail- gate and are used to secure loose items. Attention • The maximum load capacity of the tailgate storage hook is 1kg. Prohibited items When using the vehicle to transport goods or luggage, it is essential to secure them properly.
Page 33 Vehicle load Close tailgate • The tailgate is continuously closed Warning mul- tiple times, which may cause Close tailgate by the smart knob button the tailgate thermal protection to stop • Do not store dangerous goods such running, so do not operate multiple as containers with gasoline or spray times continuously.
Page 34 Vehicle load the tailgate control button to automatically When the tailgate is open, press the closing Tailgate electric function restored close the tailgate. switch on the tailgate to automatically close If the battery is powered off when the the tailgate. tailgate is open, the electric tailgate will lose Press the switch on the inside of the tailgate, Attention...
Page 35 Vehicle load Press the tailgate button to open the tail- Attention • Do not let children enter the trunk. If gate. The tailgate will automatically chil- dren are accidentally locked in open normally to the maximum. At the trunk, they may lead to overheating •...
Page 36 Enter vehicle Open the door Attention Open the door outside the car • When the doors are locked, pulling You carry the smart key near the vehicle, the inner door handle only once will press the smart key to unlock the key, the not open the door.
Page 37 Take a vehicle Seat belt it to a comfortable position as required. protection. If the seat belt is not Lower the crotch section of the seat belt as Buckle up correctly far as possible across your hips, then pull greatly reduced. the upper section of the belt upward so that the lower section of the belt is close to your Seat Belt Lock...
Page 38 Take a vehicle Wearing seat belt for Child deployed, the body position, sitting posture and body ac- tions of the The safety belt of this model is designed for adults. It is the air bag. recommended to equip special child restraint devices for children Improper wearing of seat belts and abnormal sitting postures under the age of 12 and no more than 1.5m in height.
Page 39 The seat belt retractor will lock the sliding function of the seat belt • After a serious collision, please be sure to go to a BAIC- when the following three conditions are encountered: authorized dealer to replace the used seat belt or the seat belt that •...
Page 40 BAIC authorized dealer to carry out the work, When the pre-tensioning force limiting device is triggered, white...
Page 41 Take a vehicle (at Point 9 and Point 3) to ensure you can see all meters and indicators on the combination instru- ment. Correct Sitting Posture of Driver • The driver must not adjust the seat while the vehicle is moving. Correct driver sitting posture can reduce driv- ing fatigue and ensure If necessary, after the vehicle is parked, adjust the seat to the vehicle driving safety.
Page 42 Take a vehicle to the front seat passengers when deployed. • While driving, do not recline the seat- back too far. Wear the seat belt correctly and keep correct sitting posture to avoid injury caused by emergency braking. Front seat adjustment Proper seat adjustment ensures that seat belts and air bag systems are fully protective.
Page 43 Take a vehicle Electrically adjustable front seat position Electrically adjustable front seat backrest forward and backward to ensure that the seat is reliably locked. Attention • The front passenger seat adjusts in the same way as the driver's side. Adjustment of seat headrests •...
Page 44 Take a vehicle restraint, lift the head restraint vertically and To utilize the Seat Memory function, simply the seat automatically returns to the driving move it to the required position. click on the stored sitting posture position, position. Move down: first press and hold the and the seat will automatically adjust to the locking button, then move the head restraint memory position.
Page 45 Take a vehicle Front seat ventilation* Danger Attention • If your sensitiveness to pain and • The seat ventilation/heating functions tempera- ture lowers, never use seat cannot be operated at the same time. heating func- tion, to avoid your back, Ventilation and heating •...
Page 46 Take a vehicle After making the appropriate adjustments, Attention hold the steering wheel steady and push the locking lever upward to ensure reliable • After the front seat position is locking of the steering wheel position. Rock adjusted, you can also adjust the the steering wheel to confirm the secure seat height or backrest angle to a locking of the position.
Page 47 Take a vehicle • :Return • :Answer the telephone Warning • : Multi-View Camera • :Speech recognition • Scrolling up: Page up • Roll up the scroll wheel: Increase • • Roll the wheel left: scroll down volume. horn switch to avoid damaging the •...
Page 48 Take a vehicle c i l t t e Anti-glare position (for night use) Warning on the central control screen > Driver. You Normal position (for daytime use) can set the steering wheel custom buttons for Before driving during the day, adjust the •...
Page 49 Take a vehicle unlock button will automatically unfold the side exterior rearview mirrors. Turn the adjustment knob to the folding posi- tion, and both side exterior rearview mirrors will fold inward toward the vehicle. Attention As long as the adjustment knob is turned out of the folding position , both side exterior •...
Page 50 Take a vehicle rearview mirror is being heated, just click Window Control When pulling up the power window switch this button again. beyond the resistance point and releasing it, the driver’s side window will automatically Attention rise to the top. If the switch is activated during the au- tomatic rising process, the •...
Page 51 Take a vehicle The passenger side power window switch Attention is located on each door armrest, and the In the event of dysfunction or power failure operation method is the same as that on the of the four-door window one-touch raising/ •...
Page 52 Take a vehicle Attention Attention • When the keyless start/stop mode is • F o r m o d e l s e q u i p p e d w i t h t h e not switched, the automatic window automatic window closing feature closing function in rainy weather is when locking the vehicle, wait for...
Page 53 Take a vehicle Danger Attention • In order to ensure driving safety, sunroof operation is prohibited • When both the sunroof and sunshade are closed, flipping the during driving. switch backward will give priority to opening the sunshade. Raised ventilation ON / OFF Sunroof closed When the “Keyless Start/Stop”...
Page 54 Take a vehicle Electric sunshade The sunshade can be opened together with the sunroof when the Click the vehicle settings button on the center console > Doors keyless start/stop button is in "RUN" mode: and Windows > Windows.You can set the automatic window •...
Page 55 Take a vehicle • Keep his/her feet in the foot room in front of the rear sea and on Attention • Wear the seat belt correctly. • Do not place any objects on the sunroof to prevent injuries • When carrying young child, related reg- ulations must be caused by items falling when opening or closing the sunroof.
Page 56 Take a vehicle Seat back folding Attention • After the seat back is folded down, the backrest can bear a maximum load of 100kg. tofold the seat. Hook the tie and pull up to flip the cushion forward. The left or right part of the backrest can be folded separately.
Page 57 Take a vehicle obtain optimal protection. Gently rock the seat back back and Attention forth to make sure it locks into place. • It is prohibited to adjust or fold the seats while the vehicle is in motion. Adjust the seat belt buckle to the appro- •...
Page 58 Take a vehicle out of the sunroof, otherwise they may be thrown out and cause • Let the child sit straight against the back of the chair. injury during driving. • Wear and fasten your seat belt correctly. • As a driver, you must be responsible for the safety of children in Installing child seat the car.
Page 59 Take a vehicle seats of the vehicle. Otherwise, when the air bag inflates, it Warning will impact the back of the child seat with huge force, causing serious injury or even death to the child. • The upper part of the seat belt must pass through the middle of the shoulder,not through the neck under any circumstances, and A warning sign is posted on the sun visor on the front passenger side of the vehicle to remind you to install the child seat correctly.
Page 60 Take a vehicle Attention • The "ISOFIX" upper anchor brackets on the back of the rear seat backrests can only be used to secure "ISOFIX" child seat belts. • supports for the child safety seats are designed to support the load of child safety seats only.
Page 61 Take a vehicle Corresponding fixed position of child seat 56 | Take a vehicle...
Page 62 Take a vehicle Take a vehicle | 57...
Page 63 Take a vehicle Suitability table of airbag status for child seats 58 | Take a vehicle...
Page 64 Take a vehicle Child safety lock Vehicle equipment Taill-gate cannot be opened through the inner handle. Interior Lights Attention Front reading light * • In order to prevent children in the car from accidentally opening the rear door and causing accidents, it is recommended to lock the child safety lock when there are children in the car.
Page 65 Take a vehicle When any door is opened by pressing the • When the car is locked, if any door is door lamp switch, the front reading lamp not closed, the front reading light/rear will go on. The front reading lamp will go light-ing will automatically turn off after 30s.
Page 66 Take a vehicle Safety handle to that of the front passenger’s side B-pillar handle* vanity mirror cover. Trunk lighting Passengers can use the B-pillar handle to When the vehicle is moving, passengers main- tain balance when getting in and out can maintain their balance through safety of the car.
Page 67 Take a vehicle Sunvisors Makeup mirror Side flip-up sun visor Slide the vanity mirror cover to the left to sun- visor ac- cess the vanity mirror. Both the driver's side sun visor and the front Take it out from the buckle and turn the passenger's side sun visor can be flipped sunvi- sor to the window glass to block the Danger...
Page 68 Take a vehicle Attention • The opening direction of the driver’s side vanity mirror cover is opposite to that of the front passenger’s side vanity mirror cover. 12V socket 12V sockets are located in the following areas: • The area on the right side of the trunk. The 220V power socket is located on the Warning left side of the trunk, and the “Keyless Start/...
Page 69 Take a vehicle Data interface Attention Front USB interface • When the indicator is green, the 220V power socket is in normal working con- dition. When the indicator in an abnormal state. If you confirm that the 220V elec- trical appliance is not the issue and it still cannot be used after reinsertion, please contact an authorized dealer of Beijing...
Page 70 Take a vehicle in charging power. Please refer to the not leave the mobile phone charging in the car to avoid causing safety hazards. • Not all phones are compatible with • Do not charge your phone together wire- less charging. The wireless with objects containing metal, such charger only supports phones with as coins, metal keys, or metal rings.
Page 71 If the wireless charger is faulty and charging area into the wireless can- not charge, please contact a charging area for charging. BAIC autho- rized dealer. • Do not sprinkle water in the wireless charging area. Water may cause a failure through rubber pads into the wireless charger.
Page 72 Take a vehicle Camping tray* Installing a camping tray outside the car Pick up the supporting legs, align them with the joints, and tighten them Remove the four support legs from the The camping tray is located in the trunk. clockwise to install them.
Page 73 Take a vehicle After all four support legs are installed, Installing a camping tray outside the car the camping tray can be used. Attention • When folding the small table, pay atten- tion to folding it along the folding posi- tion. •...
Page 74 Take a vehicle F a s t e n t h e l e f t a n d r i g h t z i p p e r storage box in driver's door trim panel Front seat center armrest storage box assemblies on both sides, and slightly rock the camp- ing tray up and down with your hands to ensure that the...
Page 75 Take a vehicle Glove box personal injury during emergency braking or accidents. Glove box storage hook The storage compartment is divided into two layers, with the upper layer for storing cards Press the glove box switch to open the glove and similar items.
Page 76 Take a vehicle Front bottom storage box Front top storage box* There is a storage box under the center There is a cup holder on the upper part of There is a storage box above the center armrest storage box that can be used to store the central armrest storage box, which can armrest storage box, which can be used to light- weight or smaller items.
Page 77 Take a vehicle Ticket/card holder on sunvisor Front seat backrest storage bag There is a bill holder on the inside of the There are storage pouches behind the front sunvi- sor for temporary storage of bills. seat backrests, which can be used to store Pull down the center armrest of the rear seats light- weight items such as newspapers.
Page 78 Take a vehicle Airbag system Front top storage hook subsequent colli- sions of the same nature (frontal or side collisions). Air bag system description • • Dust generated during airbag deployment can irritate skin and eyes The airbag system provides auxiliary and can cause breathing problems in protec- tion, and the driver and passengers people with respi- ratory illnesses.
Page 79 Take a vehicle Function of airbags Working conditions of airbags dealer of Beijing Automotive for inspection: • When the “Keyless Start/Stop” button When a vehicle encounters a serious When the “Keyless Start/Stop” button is in is in the “RUN” mode, and during collision, the airbag system will quickly the “RUN”...
Page 80 Take a vehicle When the following situations occur, please Danger contact a BAIC Motors authorized dealer as soon as possible: • Please do not attempt to repair, remove • The frontal airbag has been deployed. or install components of the airbag •...
Page 81 Take a vehicle correctly at all times. Danger Danger When the following situations occur, please contact a BAIC authorized dealer as soon as • Do not attach or place any items on • Do not place anything between the possible: the steering wheel, airbag cover, the driver and the door.
Page 82 Take a vehicle Side curtain airbag* If the following situations occur, please human head. contact a BAIC authorized dealer as soon as A small amount of smoke may be released possible: • Either side curtain airbag has deployed. normal. •...
Page 83 Take a vehicle Possible Deployment of Airbags Rear vehicle-end collision or collision Warning • B e s u r e t o w e a r y o u r s e a t b e l t correctly. Otherwise, the unfolding of the airbag during an accident may cause severe inju- ries or even death to the occupants.
Page 84 Take a vehicle Side collision When the vehicle’ s side outside the passen- When a side collision occurs, the driver and The when the airbags may not work in case ger compartment is impacted with minimal passengers are displaced laterally, so the air- of collision at an angle, in which the impact force, the airbags, including the frontal bag deployed from the front cannot protect...
Page 85 Take a vehicle Rear-end collision Rollover Special Collision If the vehicle collides with some thin objects When a rear-end collision occurs with a The airbag may not deploy in a rollover such as poles or trees, in such a collision, the large truck, the driver instinctively applies acci- dent, and it will not be able to protect collision point is concentrated in one place...
Page 86 Take a vehicle Impact on shoulder or hard object Vehicle falling or jumping over steps The vehicle hits a wall head-on, and the body is slightly impacted, but the Drive a vehicle across a deep pit impact intensity does not meet the airbag deployment conditions, the frontal airbag will not deploy, and the side air- bags * and side curtain airbags * will not work.
Page 87 Smart travel Main interface operation The small card can be replaced with: multimedia, weather, phone, photo USB, wireless charging*, and microphone. Homepage album, driving consul- tant, owner's Dock bar The Dock bar displays: Home button, Homeage card editor: ALL App entry button, A/C operation Outdoor: 24 10:37 p.m.
Page 88 Smart travel • Microphone (Non-Always-ON) completed. The microphone icon is displayed when the microphone permission is used, Wireless charging failure. and disappears when the microphone Installation by appointment. permission is not used. • Wireless charging (Non-Always-On)* PEPS disables wireless charging It is connected to the wireless charging functionality.
Page 89 Smart travel When both WiFi and hotspots are B l u e t o o t h O F F : T u r n o f f t h e t u r n e d o ff , t h e Wi F i o ff i c o n i s Bluetetooth function and display the Enabling and connection of the hotspot: displayed by default.
Page 90 Smart travel Sidebar Dock bar panel • Air volume Outdoor: 24 10:37 p.m. Leopard who loves cool cars Display the current air volume, click on Owner's Guide Gallery Beijing Connected Intelligent entry Outdoor: 24 10:37 p.m. Leopard who loves cool the panel and turn on the A/C cars Owner's Guide...
Page 91 Smart travel Negative one screen • After successful login, the account to either store the current position again system supports saving different or clear the saved position information personalized settings for different After successfully clearing the position, Fresh and accounts, including vehicle settings and Refreshing a popup will indicate that sitting Dark mode...
Page 92 Smart travel A/C control editing screen to replace the currently Click to Start and close the dual displayed mode. temperature zone synchronization Ventilation and 10. T h e t w o m o s t r e c e n t f r e q u e n t l y function.
Page 93 Smart travel A/C self drying gear), maintaining the user’s preset settings After enabling the function, the vehicle for air circulation mode and maintaining the will au- tomatically blow air for a period of airflow mode as it was before the vehicle time when parked to clear any condensation inside the A/C system.
Page 94 Smart travel Rear exhaust vent adjustment Bluetooth compatible cell phone Right air outlet: Slide to the left to open the air outlet, and slide to the right to close the Bluetooth connection air out- let. Outdoor: 24 Leopard who loves cool Excellent 12:59 p.m.
Page 95 Smart travel Voice assistant B l u e t o o t h d e v i c e , j u s t c l i c k system settings, you can wake up the "Disconnect" on the Blue- tooth voice by customiz- ing the wake-up Starting and exiting the voice assistant settings interface.
Page 96 Smart travel Voice assistant function range • Voice interactive operation: supports • Voice wake-up radio, music, video, Bluetooth phone, After turning it on, the voice can be • Voiceprint registration: Users can go navigation, vehicle control, online mul- awakened through the default wake-up through the registration process by timedia and other controls.
Page 97 Smart travel • Continuous dialogue • Broadcast sound recommendations, rankings, categories, - When it is enabled, a single wake-up - Display copy: gentle female voice, and mine. Users can choose according can support continuous wake-up-free sweet female voice, mature male voice. to their own preferences.
Page 98 Smart travel • Related music can be retrieved by key- for all receivable radio stations and • The player displays message: album words (search terms). save them to the default cover, song title, singer, lyrics, play- back progress bar, au-dio source icon •...
Page 99 Smart travel OTA upgrade The gallery supports classification of • After Bluetooth connection, the music pictures, videos, and photo albums. can be played through the car audio on the user's mobile phone. • Insert the USB with pictures and enter the picture screen to display all pictures •...
Page 100 Smart travel Panoramic image system • After the upgrade package is success- • When the vehicle power mode is in the fully downloaded, you can choose to RUN position, you can enter the update immediately or schedule an Multi-View Camera System as long as update.
Page 101 Smart travel no operation within 5s, the Multi-View • Multi-View Camera setting items - Body transparency setting item: 3D Camera inter-face will be closed. - Intelligent opening: After ""Intelli- body transparency can be set to non- - After activating the multi-view imag- gent Opening"...
Page 102 Smart travel all doors are closed when operating the • When turning on the Multi-View vehicle using the Multi-View Camera Camera System in a night environ- System. ment, it will affect the ef- fect of the Multi-View Camera System • Object distance displayed on full-view •...
Page 103 Smart travel medium, strong. • Light - Volume adjustment: navigation, - Parking Distance Control: ON/OFF. Lighting settings phone, voice interaction, media, system - Follow Me Home: off, 10s, 20s, 30s, - Fortification alert tone: ON, OFF • Doors and Windows 60s, 120s.
Page 104 Smart travel nition+disappear-ance, close prompt. - Rear collision warning: ON/OFF. - Vehicle attitude. - Intelligent speed assist: ON/OFF. - reversing lateral warning*: ON/OFF. Wading detection - Intelligent Lane Change Assist: - Reverse side brake*: ON/OFF. - Wading image Tips. ON/OFF. Lighting assist - Wading text prompts.
Page 105 Smart travel Scene Mode • WLAN: Supports searching for avail- exiting the mode (only when the user able devices and connecting to avail- manually exits the Fresh Air mode). able networks. • When the Refreshing and Awakening • Personal hotspot: Start and close the mode is activated and the windows are personal hotspot, set the car as a less than 20% open, the windows will...
Page 106 Smart trave • Select the custom scene on the AllApp current vehicle usage reaches 2.5 hours • After the custom mode is activated, screen to enter the custom mode. and the driver’ s seat belt is fastened, scenario modes can be created accord- Sports driving, com-fortable music, from 00:00 to 24:00 daily.
Page 107 Smart trave Chamber, Rest House, Entertainment 2. Press the camping mode button to use the will be turned off, but the following Room), Fresh Air Ventilation, or camping mode function according to the lights should be used normal-ly: Posi- Refreshing and Awakening ends, the prompts in the center console interface.
Page 108 Smart trave lights will be turned off, and interior system will re-mind the user when the volume (voice control is supported). lights will remain in their current state. set time is reached.) The mode exit After the entertainment pack-age room The ambient lights will be turned off, maintains the default time after enter- is activated, it enters the enter-tainment...
Page 109 Smart trave 4. Press the camping charging switch or • Height above sea level Height above sea level press the accelerator pedal deeply for • Barometric pressure: Display altitude data, ranging from -500m to about 3s to turn on the camping charging •...
Page 110 Smart trave 2. Click to start calibration. After waiting Attention for 3s, the driver will slowly drive the vehicle along a "circular" route, either clockwise or counterclockwise, until the • The geomagnetic principle compass is center console displays that the calibra- greatly affected by a magnetic field.
Page 111 Driving and Operation The keyless start/stop button is located on Start view mirrors to the appropriate posi- the auxiliary fascia console. tion. Start the vehicle Power Mode Switch • Confirm that all lights on the vehicle Cautions Switch the gear to P or N, press the keyless are working properly.
Page 112 Driving and Operation Attention Danger nation instrument will display a prompt message “Please depress the brake to start” (specific con-figuration • • Press the start / stop button to start the Do not run the engine for a long time may vary).
Page 113 If the vehicle gears: preparation still cannot be completed, • P (Park) please contact a BAIC autho-rized • R (Reverse) dealer immediately for repair. When the vehicle is in P or N, press the brake •...
Page 114 Driving and Operation Used for parking or starting the vehicle, Attention • Switch the keyless start/stop button to press-ing the top of the gear lever will shift " R U N " m o d e . A f t e r t h e d o o r i s to P.
Page 115 Driving and Operation Switch to D gear • Switch from P to N: While depressing Attention the brake pedal, push the shift handle Switch P to D: The vehicle is station- • forward or pull back to the ① position. ary.
Page 116 Driving and Operation - When the vehicle speed is ≥1km/h the gear is switched to R. Attention and the vehicle speed is ≤7km/h, pull • Switch D to R: the shift handle backward to the ② - With the vehicle stationary, while •...
Page 117 Driving and Operation Combination Instrument Odometer Wattmeter Instrument cluster view Displays the vehicle's real-time speed in Displays drive motor power and energy km/h. recov-ery power. Engine tachometer. Fuel gauge 1. Odometer 2. Time 3. Gear display area 4. Current driving mode 5.
Page 118 BAIC for testing: Trip computer display area After filling the fuel, the fuel gauge can •...
Page 119 Driving and Operation The interface can be switched and set fuel con-sumption, average vehicle • Self-start through the buttons on the left side of the speed, and driv-ing time since the last The startup interface displays four steering wheel. reset. types of information: current trip mile- age, average fuel consumption, average Mileage: Mileage traveled since last...
Page 120 Driving and Operation 4. The driving time is outside the display The oil volume change detected is >6L (refueling should be guaran- range. teed to be >6L at one time). 5. Disconnect the battery. The mileage reaches the maximum value of 99999.9km. •...
Page 121 Driving and Operation Multimedia interface includes: When the vehicle is driving normally, the blue indicator bar should indicate near the • Radio center position. If the indicator bar enters • Local music the red zone (“H” for high temperature), it •...
Page 122 Driving and Operation Navigation interface The vehicle map is displayed when in P Attention gear, and the corresponding content is displayed according to the assisted driving • signal when switching out of P gear (the Strictly forbidden to open the cap of vehicle and lane lines are displayed when it coolant expansion tank when the is not turned on).
Page 123 Driving and Operation Instrument warning indicator light 1. Airbag fault light 2. Anti-theft indicator of engine 3. Position lamp indicator lamp 4. Adaptive cruise system working indicator light 5. Left turn signal light indicator 6. Right turning indicator light 7. Side rear auxiliary system fault indicator light Outdoor: 24 10:37 p.m.
Page 124 Driving and Operation 20. Lighting system fault indicator light 21. Rear fog indicator lamp 22. Front fog lamp indicator lamp 23. Intelligent high beam light ON indicator light 24. Lane Departure Warning ON Indicator Light 25. Integrated Adapted Cruise Control working indicator light* 26.
Page 125 When the adaptive cruise system is in contact an autho-rized BAIC dealer if ：Airbag fault light standby state, the adaptive cruise system safety is ensured. When the keyless start/stop button is in standby indica-tor light (white) is ON.
Page 126 ABS system. At signal light is faulty or the bulb is contact a BAIC authorized dealer for pro- this time, please contact a BAIC autho- damaged. Please visit a nearby autho- cessing.
Page 127 Driving and Operation OFF, the smart speed limit function OFF This light indicates whether the ESC ： Motor system fault indicator light indicator light (white) is ON. system is OFF. When the ESC sys-tem is This indicator light is used to monitor the OFF, this light is ON.
Page 128 (yellow) is ON. Please contact a When the lane departure assist system is the engine is started, it means that the BAIC authorized dealer for processing. in standby mode, the lane departure assist engine oil pressure is low. At this time,...
Page 129 (yellow) is ON. ing light is ON while driving, please con- driving power of the vehicle is limited, so The indicator light (white) is ON drive care-fully while ensuring safety. tact a BAIC dealer for assistance. 124 | Driving and Operation...
Page 130 This indicator light is used to monitor the contact a BAIC authorized dealer for buckled into the seat belt buckle, the working status of the motor drive system.
Page 131 Driving and Operation Tire pressure monitoring system ：Speed limit indicator light* a nearby BAIC authorized dealer for This indicator light indicates the speed limit processing as soon as possible The direct tire pressure monitoring system sign detected by the traffic sign identifica- uses tire pressure sensors installed on the ：...
Page 132 Driving and Operation the combination in-strument, accompanied and please contact a BAIC authorized dealer tire pressure monitoring system auto- by a prompt sound, and the tire pressure for processing. matically enters the normal working information of the faulty tire corresponding mode.
Page 133 If there are any abnormalities after vehicle. replacing the wheels, you should go to Make sure that all drivers and passengers a BAIC authorized dealer for treat- are using seat belts correctly. ment. While driving, do not perform operations unrelated to driving (such as answering •...
Page 134 Driving and Operation Driving mode • Do not lay other mats or coverings on Danger the foot pads. The purpose is to prevent the pedal stroke from being reduced and • Before driving the vehicle, make sure hindering the movement of the pedals. that all pedals can be easily depressed to the bottom and return to their original •...
Page 135 Driving and Operation • Comfort: The comfort mode driving • Mud*: Mud mode is suitable for condi- ically controlled by the system. style takes into account both power and tions such as mud, ruts, deep ditches, Under complex road conditions, the economy, and the accelerator pedal and unpaved roads with uneven surfac- system optimizes various vehicle con-...
Page 136 Driving and Operation 3. Fully depress the brake pedal with your Warning Attention left foot and depress the accelerator pedal with your right foot. The instrument will • • Please drive carefully within the scope Water depth detection is only a Driver prompt the user: Ejection launch mode is Assistance function and may have false p e r m i t t e d b y r e l e v a n t l a w s a n d...
Page 137 10 ° when The Electronic Stability Control (ESC) driven at a low speed to the nearest BAIC wading, and drive at a low speed and system of the body can improve the vehi- safely.
Page 138 When braking in an emergency, please do on snowy roads). the nearest BAIC Motor authorized dealer not depress the brake pedal several times for processing while ensuring safety. To •...
Page 139 At this time, you should pull over Traction Control System In response to rapid but insufficient pedal immediately and contact a BAIC Motor Traction Control System (TCS) helps main- input, the ESC will actively boost the brake authorized dealer for processing while ensur-...
Page 140 Driving and Operation Electronic parking brake system parking brake indicator light is ON in the Automatic release Apply electronic parking brake instrument cluster. The electronic parking brake can be auto- Release the electronic parking brake matically released when any of the follow- ing conditions are met: •...
Page 141 Driving and Operation Emergency parking brake Attention Attention In an emergency, pull up the EPB switch and hold it to use the EPB system to brake • • A slight noise is normal when the When the power supply is interrupted, the vehicle.
Page 142 If the fault is not eliminated, please bonding, which will make it difficult over to perform electronic parking contact a BAIC authorized dealer for or impossible for the vehicle to start. processing. • If you need to replace the electronic Attention •...
Page 143 Driving and Operation Turn off the engine and prohibit parking When the keyless start/stop button is in • Attention non-"RUN" mode. Outdoor: 10:37 p.m. Excellent Leopard who • Set the gear to "D" and depress the loves cool cars Energy recovery Window •...
Page 144 Driving and Operation standby state. The (green) indicator light in Factors affecting the braking effect discs and brake pads, and the braking effi- the instrument cluster is ON. ciency will be reduced. You should lightly Worn When the Hill Decent Control function is press the brake pedal a few times, remove ON standby: The wear of brake friction plates depends to...
Page 145 Driving and Operation Plateau environment Brake Disc Surface Rusting Brake overheating In high-altitude areas with thin air and low If the vehicle is parked for an extended When braking is not required, do not put atmospheric pressure, the power assistance period of time, the brake discs may become your foot on the brake pedal and cause the for braking may decrease* (If the vehicle is...
Page 146 • If the windshield or bumper needs to be According to the Interim Provisions on Radio replaced, please contact a BAIC autho- Management of Automotive Radar, in order rized dealer for processing. This ensures to protect radio astronomy operations work-...
Page 147 Driving and Operation between constant cruise and car-following Urumqi City, Xinjiang Uygur Autono- Warning cruise. mous Region, and automotive radar is • Within 90s after the Adaptive Cruise Con By utilizing the Adaptive Cruise Control 5km. trol (ACC) system follows a preceding system, vehicles can engage in follow-up •...
Page 148 Driving and Operation • Do not use ACC in extreme weather (such instrument will give an alarm continuous Warning as fog, rain, snow, hail, etc.), slippery ly, at which the driver must immediately • If the vehicle in front suddenly brakes roads, steep slopes or bends.
Page 149 Driving and Operation • For vehicles carrying special loads or the instrument panel regarding preceding equipment, items or accessories extending vehicles and adjacent lanes may differ beyond the sides, rear, or roof of the vehicle from the actual situation. It is essential to in front cannot be detected.
Page 150 Driving and Operation Attention • During ACC operation, the system brake may make a sound. This phenomenon is • During operation, the ACC system will cause the vehicle to brake when braking is not required or is not intended. This may be due to the detection of vehicles or objects in adjacent lanes (especially on corners).
Page 151 Driving and Operation Start and close the adaptive cruise 1. Set car following headway. Attention 2. Set cruise speed. Click the vehicle settings button on the center After the adaptive cruise function is activated, console > Driving Assist > Intelligent cruise. the following conditions must be met for the adaptive cruise to work properly: The adaptive cruise function can be started/...
Page 152 Driving and Operation Increase/decrease target speed Attention After activating the ACC, pushing down the cruise control lever decreases the target speed ACC will automatically exit under the follow- ing circumstances: target speed to the nearest multiple of 5 (e.g., • Turn off the Integrated Adapted Cruise 43km/h will be reduced to 40km/h).
Page 153 Driving and Operation Integrated Adapted Cruise Control system If the vehicle stops for more than 90s but with- Attention in 10 minutes, the driver needs to step on the Before running IACC, please read carefully and • When the driver steps on the accelerator accelerator pedal or pull back the cruise control become familiar with the all contents of this pedal to actively increase speed, the ve-...
Page 154 Driving and Operation • The camera's view is poor due to bad • Driving on a curve with too small a curva- Danger weather such as rain, snow, fog, etc. ture radius. • The Integrated Adapted Cruise Control • The windshield is fogged, dirty, or the front •...
Page 155 Driving and Operation Attention Attention tended period of time (such as at a power The control function or performance of the It is not recommended to use the IACC func- plant or other places with HV electro- IACC system may not be guaranteed under tion in the following situations: magnetic radiation), please pay attention the following circumstances:...
Page 156 Driving and Operation Display Interface Start/close the Integrated Adapted Cruise IACC status. In standby mode, the IACC Control standby indicator (white) goes on. Outdoor: 24 10:37 p.m. Click the vehicle settings button on the center 3. The identified target vehicle will be high- Spot console >...
Page 157 Driving and Operation Restore IAC After receiving the request to take over, the • Never rely on Automatic Lane Change driver should immediately brake appropriately Assist to determine the appropriate driving After exiting to ACC from IACC, the IACC and hold the steering wheel. Don't panic or route.
Page 158 Driving and Operation Start and close the automatic lane change During the vehicle's autonomous lane change Attention assist process, the vehicle automatically performs ac- After turning on the automatic lane change celeration and deceleration control based on the Click the vehicle settings button on the center assist function, the following conditions must vehicle conditions in its own lane and the target console...
Page 159 Driving and Operation displays the maximum speed limit value. Attention • The vehicle is driving too close to the vehicle in front, thereby blocking the Attention Integrated Adapted Cruise Control, automatic camera's view. lane change assist and related functions may •...
Page 160 Driving and Operation Speeding alarm reminder After the vehicle passes the speed limit sign, • Improper repairs to the windshield glass the instrument will display speed limit infor- The overspeed alert is based on the navigation may cause changes in the position of the mation within a certain driving distance.
Page 161 When the vehicle is started, the LDW switch • When a system failure is prompted, is ON, and the vehicle speed is >60km/h, the please contact a BAIC authorized dealer LDW function is activated. for processing. Attention • The system may generate false or missed alerts when there are road construction, •...
Page 162 When a system failure is prompted, viate from the current lane and the driver does vehicle deviates, the lane markings are red. please contact a BAIC authorized dealer not intend to change lanes, it provides steering for processing. LDW sensitivity intervention to assist the driver in keeping the •...
Page 163 Driving and Operation • When lane markings are recognized and the Attention RDP sensitivity vehicle deviates, the lane markings are red. RDP sensitivity refers to the trigger frequency • When the parts related to vehicle control • When lane markings are identified and of RDP alarm,And under high sensitivity, there are non-original parts or have been mod- steering intervention occurs, the lane mark-...
Page 164 When encountering an increase in lanes Attention • When a system failure is prompted, or lane merging, this function may fault please contact a BAIC authorized dealer • This function is only an auxiliary function or not work. Drivers are advised to drive for processing.
Page 165 Driving and Operation and forward collision warning sensitivity can Attention • Curve riding drive. be started and closed. • Lane consolidation. • If the instrument panel indicates a lim- itation in the Emergency Lane Keeping • Strong braking. The forward collision warning system includes function and the rear corner radar fault •...
Page 166 Driving and Operation Among them, the self-vehicle speed range of Warning driver must apply the brake according to pre-alarm and emergency alarm is about 30km/ • Improper vehicle modifications (such as h~85km/h for stationary targets; the self-vehicle or steer away from the obstacle. lowering the ride height, changing the ve- speed range for moving targets is about 30km/ hicle's front license plate mounting plate,...
Page 167 Driving and Operation • When the system detects pedestrians, Attention • If the camera is blocked by bird drop- it requires precise identification of the pings, mud, ice, insects, etc., the early The forward collision warning system may following information: the pedestrian’s warning auxiliary brake system may not not operate when: head, arms, shoulders, legs, upper and...
Page 168 Driving and Operation If a collision risk with a vehicle or pedestrian • When driving on snowy or rainstorm • During an emergency alarm, if the driver ahead is detected and it is extremely urgent, if days. is alert (for example, the driver turns the driver has applied braking measures but the the steering wheel or applies emergency •...
Page 169 Driving and Operation Danger • If the camera is blocked by bird drop- driver will need to take over control. pings, mud, ice, insects, etc., the early • The performance of the Automatic Emer- • When the ESC function is off or the fault warning auxiliary brake system may not gency brake system will be greatly limit- light is ON, the automatic emergency...
Page 170 Driving and Operation Warning Attention Attention Automatic emergency braking is only a Driv- The automatic emergency braking system • When there are narrow vehicles (for ex- er Assistance function, and there is a risk of may not work when: ample, motorcycles) driving ahead. not being able to identify pedestrians due to •...
Page 171 Driving and Operation Attention Attention Attention • Road and weather conditions may ad- • When there are stationary obstacles ahead (e.g. anchored vehicles). system is limited in the following situations: versely affect the radar detection area. • Sludge, ice and snow, etc. cause damage •...
Page 172 Driving and Operation Attention Attention The Front Cross Traffic Alert system utilizes • Road and weather conditions may ad- two corner radars installed at the front of the system is limited in the following situations: versely affect the radar detection area. vehicle to detect the rapid approach of other •...
Page 173 Driving and Operation Lane change assist Attention Attention The Lane Change Assist system utilizes two • Lane Change Assist uses radar to detect • Do not rely too much on the lane change an area up to approximately 70m behind corner radars installed at the rear of the vehicle assist system to reduce the occurrence of adjacent lanes.
Page 174 • Driving and Operation Reverse lateral brake Attention The reversing lateral warning system utilizes The reversing lateral warning system utilizes • The road is winding. two corner radars installed at the rear of the two corner radars installed at the rear of the ve- •...
Page 175 Driving and Operation Attention Attention Click the vehicle settings button on the center • When the side and rear target moves too The function of the reverse lateral braking console > Driver Assistance > Side and Rear fast or too slow, the reverse lateral brak- system is limited in the following situations: ing may not be able to brake in time.
Page 176 Driving and Operation Attention Danger Click the vehicle settings button on the center • When the vehicle behind is moving too • The door-opening collision avoidance console > Driver Assistance > Side and Rear fast, the function may not be able to send warning system cannot detect objects Assistance.
Page 177 Driving and Operation Attention When the “Keyless Start/Stop” button is in the System detection is limited and cannot detect “RUN” mode, rotate the light control knob so targets normally under the following condi- that the indicator above the knob aligns with tions: the low beam position.
Page 178 Driving and Operation The headlights are automatically lit. Attention Front fog lamp* When the “Keyless Start/Stop” button is in the • After completing a turn or lane change, “RUN” mode, rotate the light control knob so please ensure that the light control lever that the indicator above the knob aligns with the has returned to its original position.
Page 179 Driving and Operation headlights on, when the driver turns the steering wheel (to a certain angle) or activates the turn signal, the corresponding front fog lamp goes on, assisting in illuminating the blind spots on curved roads. The corresponding auxiliary light on the side turns off when the steering wheel returns to the center position or the turn signal is OFF.
Page 180 Driving and Operation Smart ritual sense headlight Emergency brake signal The front and rear headlights have a ceremonial When the vehicle speed exceeds 50km / h and Outdoor: 10:37 p.m. Excellent Leopard who loves cool cars function when unlocking, locking, or finding emergency braking occurs, the brake light will Atmosphere light Search...
Page 181 Driving and Operation When the camera detects vehicles ahead or the Once the function is enabled, when the light Attention environment becomes brighter, this function control lever is turned to AUTO and the low • After the "Follow Me Home" function is automatically turns off the high beam and the beams go on, and the vehicle speed is >40km/ activated, it can be activated again within...
Page 182 Driving and Operation When in this position, the rain sensor sensitiv- Attention Attention ity adjustment lever can be used to change the The intelligent high-beam assist system has • When the driver turns on the fog lights, sensitivity of the rain sensor to the amount of limitations in identifying the road environ- turn signals or makes an emergency turn, rainfall.
Page 183 Driving and Operation cally turn on and the wiping speed will change Attention Attention according to the amount of rainfall. • The wipers and washer can only work • In winter, snow and ice should be prompt- when the keyless start/stop button is in ly removed from the wiper arms and wip- Attention "RUN"...
Page 184 Driving and Operation Fording drive Rear Wiper Attention If you need to drive through waterlogged roads, When the rear wiper knob switch is turned up- • When the tailgate is opened, the rear please pay attention to the following: ward to the "ON" position, the rear wiper starts wiper will not work.
Page 185 Driving and Operation • After driving through water, gently depress Attention Attention the brake pedal a few times to dry the • Exercise extra caution when driving on • When driving through water, do not brakes and restore braking effectiveness. slippery road surfaces.
Page 186 Do not install anti-skid chains that have not the engine and switching the gear to drive, the ments. been approved by BAIC's authorized dealers. vehicle may lag in starting. This characteristic 2. Check the tires to ensure they have ade-...
Page 187 Driving and Operation Winter tire It is recommended to use winter tires of the When driving on long and steep slopes, slow same size as the original vehicle tires, and all Danger down in advance. If you overuse the brakes, four wheels must be replaced.
Page 188 Driving and Operation • Avoid fully depressing the throttle pedal for • Be sure to avoid high-speed engine oper- Danger rapid acceleration. ation and do not exceed 80% of the maxi- • New tires and brake pads that have not mum speed.
Page 189 Driving and Operation Braking Essentials • In the lateral wind, you must drive at a low sible, choose roads without traffic signals speed, so it is easy to control the vehicle. for travel. Keep an appropriate distance Avoid using the brake pedal as a footrest. If you from other vehicles when driving to avoid •...
Page 190 Driving and Operation When refueling, slowly unscrew the fuel fill- Attention er cap counterclockwise. Before completely • Before driving, make sure the parking brake is released. release internal pressure. Then remove the fuel • When driving on slippery surfaces, use caution when accelerating, shifting or braking.
Page 191 Driving and Operation Attention Attention • The vehicle is equipped with a catalytic • This vehicle is equipped with a catalyt- converter. Refuel before the fuel warning ic converter and is only allowed to use light illuminates to prevent running out unleaded gasoline.
Page 192 Driving and Operation Enter the automobile data recorder car, enter the settings menu, and select the Attention "Format SD Card" command to complete Click the application center button on the center the format. • After the vehicle is powered on, it can be console >...
Page 193 Driving and Operation automatically trigger emergency video record- videos or captured photos to the emergency re- [Format SD Card]: Considering the recording ing, which also can be triggered manually by cording folder. and storage requirements, when using the SD pressing and holding the fast camera button on card for the first time, touch the [Format SD the steering wheel.
Page 194 If the ETC transaction is abnormal, the program or APP prompts. gate will not be opened. At this time, please follow the instructions of the toll station staff. If the ETC fails, please contact a BAIC authorized dealer for pro- cessing. Driving and Operation | 189...
Page 195 > Driver. The fol- that the electric power steering system is not lowing settings can be made for the electronic system working properly. Please contact a BAIC au- power steering mode: thorized dealer for processing. The Electric Power Steering (EPS) provides •...
Page 196 Driving and Operation Attention • If the driving mode interconnection func- tion is activated, it will automatically switch to the corresponding electronic power steering mode when switching driving modes. • When the driving mode interconnection is activated, the electronic power steering mode setting button cannot be manually operated.
Page 197 Park Assistance Rear Parking Distance Control Parking Distance Control Parking Distance Control system 1. Rear angle sensor 2. Rear intermediate sensor The parking radar system is a safety auxilia- 3. Rear intermediate sensor ry device for cars when parking or revers- 4.
Page 198 Park Assistance The two rear middle sensors can detect You can enter the Parking Distance Control • The system is in the off state, and when the objects up to 1.5m behind the car, and the interface by clicking the vehicle settings vehicle speed is <12km/h in N/D gear, the two rear corner sesnor s can detect objects button on the center console...
Page 199 Park Assistance The following situations may cause false alarms Parking radar system fault alarm instruc- Attention or no alarms: tions • Do not directly spray the sensor surface • Noise sources that are close to the frequen- with high-pressure water such as a water Radar malfunction reminder cy range of the ultrasonic sensor, such as gun, or use other methods to squeeze or...
Page 200 Park Assistance Panoramic imaging system exit conditions AVM includes the following main functions: When the Multi-View Camera System is acti- • 360 ° around view By clicking the Multi-View Camera button on vated, you can exit if any of the following con- the sidebar of the center console, you can enter The controller seamlessly splices the imag- ditions are met:...
Page 201 Park Assistance Blind spot monitoring system Use of blind spot monitoring system Attention Click the vehicle settings button on the center • When entered through the opening con- Introduction to blind spot monitoring dition (press the multi-view switch on the console >...
Page 202 Park Assistance Blind spot monitoring and alarm method Attention When the system detects a moving object, the • When the radar sensor is covered by rain, combination instrument will display the BSD snow, mud, ice, etc., this function will warning interface. Visual and audible warnings cause false alarms and false alarms.
Page 203 Flameout lockout Warning Attention Flameout lockout • Do not switch off the engine while driv- • The brake assist does not work after the Depress the brake pedal, stop the vehicle, apply ing! Otherwise, the vehicle may lose con- engine is OFF, and the brake pedal needs the electronic parking brake, and switch the trol and cause an accident.
Page 204 Flameout lockout Smart knob button lock When the keyless start/stop button is in "OFF" Attention mode, all doors and hood are closed. If you • If you need to put the smart knob into hold the smart knob about 2m away from the the car from outside the car, you need to door handle, the door locks will be locked and press the smart knob lock button twice...
Page 205 Flameout lockout Emergency locking passenger side door Interior lock Attention Door central lock locked • For vehicles equipped with electrically folding exterior rearview mirrors, the rearview mirrors automatically fold after all doors are locked. Smart key forgotten in the car If one Smart knob is left inside the vehicle and all four doors are closed after opening from any door, using another Smart knob to remotely...
Page 206 Flameout lockout After the vehicle is locked with the smart knob, Warning Attention • Do not leave children or people with mo- • The automatic locking function is enabled hood and tailgate are monitored. If a door, tail- bility difficulties alone in the car! They by default while driving, and the default gate or hood is found to have been opened ille- might unintentionally press the central...
Page 207 Flameout lockout • If the vehicle is locked using the smart key Alarm State and the door is unlocked or opened with the Triggered condition of alarm status: mechanical key, the vehicle enters an alarm • state. the horn sounds. Attention •...
Page 208 Maintenance Automatic cleaning machine cleans vehicles Cleaning Maintenance Attention • Vehicles equipped with sunroofs can also • Do not use strong household soaps, Exterior cleaning be cleaned in automatic car wash facilities, chemical detergents, or solvents to clean To clean vehicle the surface of the vehicle.
Page 209 - being restricted. It is recommended to go ven cloth or chamois. to a BAIC authorized dealer to apply the 204 | Maintenance...
Page 210 Maintenance Do not use bleach, dyes, or chemical solvents Attention • Promptly remove small stones embedded in to clean the seat belt webbing as they can cause the tire treads to avoid affecting tire perfor- • Thoroughly clean the vehicle before ap- severe damage to it.
Page 211 Maintenance Vehicle maintenance Please consult an authorized dealer of Beijing according to the maintenance mileage reminder Automotive for more information. on the combination instrument (see “Mainte Maintenance instructions nance Mileage”). The most common causes of vehicle corro- As the vehicle accumulates mileage, its compo- sion Attention nents will gradually wear out, and its technical...
Page 212 • still very high in the fuel pipeline. Do repair, please consult a BAIC authorized dealer. or sparks to come near fuel system com- not disassemble the fuel pipeline. Please ponents and the battery.
Page 213 Maintenance Parking brake: Tire: Cleaning and maintenance of dashboards and Operate the electronic parking brake switch to plastic parts Prior to long-distance driving, carefully inspect ensure reliable parking effect. the tires for damage, cracks, or excessive wear Clean the dashboard and plastic surfaces regu- and measure the tire pressure with a tire pres- Steering wheel larly with a clean soft cloth.
Page 214 Check whether the wiper and washer can work (engine oil) normally. If the wiper leaves scratches after wiping, you should immediately go to a BAIC authorized dealer to replace the wiper blade. off the engine, and after 10 minutes, check the oil level with the engine oil dipstick.
Page 215 Maintenance Maintenance Information Table Periodical Primary Periodical maintenance items Maintenance Maintenance 1. Primary maintenance 5000km / 6 months Under severe use conditions, replace every (subject to the purchase invoice), whichev- Engine oil 5000km/6 months er comes Under severe use conditions, replace every 2.
Page 216 Maintenance Periodical Primary Periodical maintenance items Maintenance Maintenance promptly after use in sandy and dusty environments. Clean every 10,000km/6 months; replace every 20,000km/1 year (It is recommended to replace it after the lint-prone period in spring); when ment be checked every day and cleaned or replaced in time. Engine Idling Speed and then every 30,000km/1 year, and replaced if Timing belt and...
Page 217 Maintenance Periodical Primary Periodical maintenance items Maintenance Maintenance Special diagnostic equipment is required to read the fault storage information in each Computer testing system controller. Check the hose for abnormal wear, cracks, bulges, scratches, burns, oil leakage and other Radiator, brake, exhaust adverse phenomena, and replace it if necessary;In the season when catkins are common in and fuel lines and their spring, check whether the front end of the radia tor is blocked by catkins every 10,000km...
Page 218 Maintenance Periodical Primary Periodical maintenance items Maintenance Maintenance Check whether the seat belt can be pulled out easily and quickly and retracted naturally, whether it can be Seat belt locked, and whether the height can be adjusted normally; check whether the seat belt webbing is damaged Transmission shift Check whether there are foreign objects, dust, etc.
Page 219 Maintenance Periodical Primary Periodical maintenance items Maintenance Maintenance Inspect the surface of the enclosure for any cracks, deformations, bulges, odors, leaks, or other abnormalities. Check all exposed fasteners, nuts, and bolts for looseness, missing or deformed parts. Verify the tightness of the fasteners in the battery system. Conduct a semi-annual inspection of the Power battery box external enclosure for protective status.
Page 220 Maintenance Wiper replacement When the wiper maintenance is activated, the Attention wiper will automatically move to the mainte- • After removing the wiper blades, exercise nance position. The front wiper blade can be replaced as follows: extra caution. Place a thick towel under the lower part of the wiper arm to prevent 1.
Page 221 Maintenance 3. Install the new wiper blade assembly so that the boss on the wiper blade assem- bly snaps into the groove on the wiper arm. 4. After installation is completed, check that the wiper blade assembly is installed reli- ably.
Page 222 Attention Contamination of either the windshield or the • Wiper blades must be kept in good condi- id, please contact a BAIC authorized dealer for wiper blades will reduce the wiper's effective- tion to obtain a clear view. help. ness. The main sources of contamination are •...
Page 223 1. Check to make sure there are no other for- Oil inspection and addition is too low or the spray position is incorrect, eign objects in the engine compartment to please contact a BAIC authorized dealer for ON/OFF hood prevent vehicle parts from being pinched. processing.
Page 224 Maintenance Attention • Low temperature environment may cause the hood to fail to close. In this case, the rubber buffer block in the compartment needs to be slightly rotated clockwise un- til it can be closed. • If steam or smoke comes out of the en- gine compartment, do not open the hood to prevent injury.
Page 225 8. Cabin fuse box Attention • It is recommended that users do not disassemble or assemble the hood by themselves avoid unnecessary damage. If you need to disassemble or assemble, please go to a BAIC authorized dealer for processing. 220 | Maintenance...
Page 226 • precautions! These work should be carried out or coolant is visible escaping. at the BAIC authorized dealer. Improper opera- • If it is necessary to perform operations ous faults of the vehicle.
Page 227 2. Open the hood time, you should shut down the engine and contact a BAIC authorized dealer to inspect the 3. Remove the engine trim cover ; engine lubrication system. engine oil from dripping onto the engine.
Page 228 The engine oil will be replaced by the autho- small increments. After each addition, rized dealer of BAIC. check the oil level by adding a small quan- If the vehicle is being driven under harsh con-...
Page 229 Be sure to change the engine oil regularly • During winter or in cold regions, it is im- please contact an authorized BAIC Motor deal- according to the "Maintenance Informa- perative to replace the engine oil with a er to inspect the brake system.
Page 230 Attention • • Please go to a BAIC authorized dealer to • The brake fluid level should be between the MAX and MIN marks. To ensure the normal functioning of the brake If the fluid level significantly drops within a...
Page 231 Thanks for your choice Warning Attention Check the coolant level after the engine has cooled down. • Failure to change the brake fluid within • It is prohibited to drive the vehicle with- out coolant, otherwise it may cause vehi- Electric drive system coolant level check the brake system, which may lead to seri- cle failure.
Page 232 50%~ illuminate the fault light. Please contact a BAIC 60%. The maintenance method is: start the authorized dealer for processing. vehicle, put it in P gear, keep the engine started...
Page 233 Maintenance Danger Danger Danger • To ensure the safety of power batteries, • Excessive dust on the air intake vents • The high-voltage wiring harness of the vehicles should be parked away from will affect the cooling effect of the power vehicle is orange.
Page 234 LED lights cannot be replaced individu- If the fog cannot dissipate for a long time, you ally. It is recommended to visit an autho- can go to a BAIC authorized dealer for inspec- rized dealer of Beijing Automotive for tion and repair.
Page 235 Maintenance Cabin fuse box Battery Fuse Box Attention • Never use fuse whose amperage is higher than rated value or anything else. Other- wise, it might cause severe damage and • If a replacement fuse with an amperage rating matching the circuit is not avail- able, a fuse with a lower amperage rating should be used as a substitute.
Page 236 If there is still a fault, please contact the autho- rized dealer of BAIC. Maintenance | 231...
Page 237 Maintenance Fuse location assignment Engine compartment fuse box location diagram 232 | Maintenance...
Page 238 Maintenance Protection circuit Protection circuit EF01 Electronic braking integrated module EF21 EF02 Warm air pump EF22 Thermal management water valve EF03 Air blower EF23 Brake switch EF04 Electronic water pump EF24 Rear Wiper EF05 EF25 Reserve EF06 Reserve EF27 EF07 Battery pump EF28 Oil pump...
Page 239 Maintenance Protection circuit ERY01 Main relay ERY02 Reserve ERY04 PDCU main relay ERY05 Blower relay ERY06 Rear defroster relay ERY07 Electronic water pump relay ERY08 Low speed wiper relay ERY09 High speed wiper relay ERY10 IG2 relay ERY12 Fuel pump relay ERY13 IG1 relay 234 | Maintenance...
Page 240 Maintenance Battery Fuse Box Protection circuit PF01 Cooling fan Dashboard electrical box PF02 power supply Front compartment electrical PF03 150A box master power supply Heated front windshield PF04 (alpine version only) PF05 Electronic oil pump PF06 Electronic water pump Maintenance | 235...
Page 241 Maintenance Instrument panel fuse box Protection circuit Driver power seat RF01 Upstream fuse 1 RF02 RF03 RF04 Infotainment Domain Controller Sunroof RF05 Electric back door bluetooth module, exterior rearview mirror, RF06 fourdoor power window switch RF module, electric seats TBOX MPC ETC* Off-road information module Rain light RF07 sensor...
Page 242 Maintenance Protection circuit RF08 Air blower Left rear combination light Right rear combination light Multi-view RF09 controller Bluetooth antenna Instrument cluster, A/C controller, Electronic shifter, Central gate- RF10 way 1 RF11 Driver power seat RF12 Front passenger electric seat RF13 Electric tailgate controller RF14 Driver power seat...
Page 243 Maintenance Protection circuit RF26 Gateway RF27 BDC rear view mirror Taillgate lock horn RF28 Wireless charging * RF29 Infotainment Domain Controller RF30 Infotainment Domain Controller RF31 BDC external lighting power supply RF32 BDC door lock power supply RF33 Electronic shifter center channel switch RF34 Instrument cluster BDC gateway RF35...
Page 244 Maintenance Protection circuit RF44 USB POWER RF45 RF46 ACDC AVM Seat RF47 Reserve RF48 12V power supply (rear) RF49 Reserve RF50 Reserve RF51 Left headlight Right headlight Through light RF52 Detect millimeter wave radar RRY01 Power rearview mirror unfolding relay RRY02 Electric exterior mirror retract relay RRY03...
Page 245 Maintenance Battery positive electrode fuse box Protection circuit IBS sensor 175A Battery fuse 240 | Maintenance...
Page 246 Send the exhaust- tricity buildup, to prevent sparks that may to safely charge the battery externally. Please ed battery to a BAIC authorized dealer- go to a Beijing Automobile authorized dealer to ship or a special waste battery recycling charge.
Page 247 • After parking the vehicle and shutting of winter, it is best to go to a BAIC authorized dealer of Beijing Automotive for profes- down the engine, ensure all doors and dealer to check the vehicle battery and recharge...
Page 248 If the above phenomenon occurs, please contact lation, abnormal tire wear, and compromised Before turning it on again, make sure that a BAIC authorized dealer for inspection and driving stability. Therefore, it is recommended all electrical are turned off in the vehicle.
Page 249 Maintenance Replacement of rim Danger Attention If the wheel rim shows signs of twisting, defor- • Do not use old tires of unknown origin, • After replacing the tires, the tire pressure mation, cracking, corrosion, or severe scratch- because although such tires have no visi- needs to be adjusted to the standard val- es, it should be replaced.
Page 250 If the tire is worn unevenly or excessive- of knowing how an old rim has been used injury. ly, go to the authorized dealer of BAIC and how many miles it has traveled, there for wheel alignment inspection. Tire Exchange may be invisible cracks that could cause an accident while driving.
Page 251 Maintenance Air pressure gauge to check tire pressure Check your vehicle's tire information to find When changing the wheels, follow a diagonal out which tire type and size you need. pattern. Use a tire pressure gauge to check tire pressure For the same axle, it is necessary to use tires of when the tires are cold.
Page 252 Maintenance be aggravated, which will greatly affect the ve- After inspection, be sure to put the valve cap without charging the battery,the battery may back on the valve. hicle's handling stability and fuel economy, and fail due to self-discharge. increase the risk of tire failure. Excessive tire Danger Ambient temperature pressure will cause the vehicle to drive uneven-...
Page 253 (the gine. eration.” It indicates that the particulate filter water temperature indicator bar should is faulty. In this case, please contact a BAIC Attention indicate near the middle position), then authorized dealer to have the particulate filter drive the vehicle according to the driving repaired as soon as possible.
Page 254 When using a bulb that exceeds the rated power Danger dealer of BAIC. We recommend you always to make the lamp brighter, the wiring harness use the accessories and parts which have been •...
Page 255 Rubber After being crushed, tires and seal rings can be and more. Environmental Entrusting your car to a BAIC authorized deal- er for inspection and repair can control various pollution hazards and contribute to environ- mental protection. Scrap or damaged parts Do not dispose of them indiscriminately;...
Page 256 The call is also hung up in the back - After the car system detects the incoming call, ground. the microphone and audio switch to ECALL mode to mute the in-car audio; the center con- sole displays "BAIC Emergency Rescue Assis- Emergency Treatment | 251...
Page 257 Emergency Treatment The vehicle tool box is located under the trunk • lid. When using, please open the trunk lid, pull up the trunk lid handle, and pull the trunk lid up • In emergency. to the highest position. Attention •...
Page 258 Under the following circumstances, it is not al- check the expiration date of the tire repair lowed to use tire repair tools to repair tires and you should contact a BAIC authorized dealer for processing: • There is damage to the rim.
Page 259 Emergency Treatment Attention • Do not continue to drive a vehicle with a or even the rim. • It is important to follow the steps above to protect your own safety and the protec- tion of other road users. Repair tires 4.
Page 260 • After using the inflated tire repair fluid tank, the vehicle should immediately go Warning to the nearest BAIC authorized dealer or special tire repair shop for tire repair or • The diameter of the repair puncture in replacement.
Page 261 Emergency Treatment Attention • Please ensure that the reflective vest is clean and intact to avoid affecting its use. • Reflective vests should be stored in the bag and placed in the glove box. • es is not the only factor that affects the life also depends on use, maintenance, storage, etc.
Page 262 Emergency Treatment 4. Connect one end of the black cable to the • The rated voltage of the power supply bat- Attention negative terminal of the power supply bat- tery must be above 12V, and its capacity • Read and follow the relevant warnings tery and the other end to the metal case of (Ah) cannot be lower than the faulty bat- before operating the batteries.
Page 263 2. Under the condition of ensuring personal 2. It is recommended to call the rescue hotline safety, contact a BAIC authorized dealer to immediately. wait for rescue. 258 | Emergency Treatment...
Page 264 Using proper equipment in towing can prevent Attention If there are any repair needs, it is recom- damage to the vehicle. Professional vehicle mended to go to a BAIC authorized deal- • All the above information records are for roadside assistance company personnel are fa- er for processing.
Page 265 Emergency Treatment It is not allowed to directly use traction chains, Warning traction ropes or tow the vehicle with the • Towed vehicles must have their hazard wheels on the ground. It can only be transport- ed on the loading platform to avoid damage to •...
Page 266 Emergency Treatment Attention Attention • When towing a vehicle, it is essential to • Using steel wire ropes, metal chains, or metal tow bars to tow the vehicle may do so under the guidance of a profession- cause damage to the vehicle body. It is al to prevent unnecessary harm.
Page 267 Emergency Treatment 1. Remove the towing eye from the trunk. 3. Screw the traction ring clockwise into the 3. Screw the traction ring clockwise into the threaded hole and use tools such as hard threaded hole and use tools such as hard metal rods to tighten it securely.
Page 268 Technical Parameters The Vehicle Identification Number (VIN) is a unique identifcation code for the vehicle, which isdisplaved on the front Microwave window Engine hood (VIN) Dashboard (VIN) and rear parts of the vehicle. The exact placement is shown in the Figure (thedia- gram only shows a portion of the VIN on the vehicle).
Page 269 9. Number of passengers, year of manufacture ment. Made in China XXXXXXXXXX Diagnostic interface • Purchase channels and contact informa- tion of the diagnostic tester: BAIC Sales Complete Vehicle Model: Brand: Driving motor model: Engine model: Co., Ltd. 400-810-8100. Drive motor peak power: kW...
Page 270 Technical Parameters The microwave window is located on the front windshield and is used to install automotive electronic signs. The installation position is not as to ensure the effective reading of data. Technical Parameters | 265...
Page 271 These labels alert you to potential hazards that could cause serious injury. Please read these labelscarefully. Attention • If the logo falls off or is blurred, please contact a BAIC authorized dealer for processing in time. 266 | Technical Parameters...
Page 272 Technical Parameters High voltage safety label information Name Marks Meaning Do not touch high-voltage compo- High voltage danger signs nents, it is dangerous High-voltage components, please High voltage component warning read the instructions before use. signs There is a risk of electric shock. Basic information about power bat- Power battery label tery...
Page 273 Technical Parameters Engine and transmission The engine model and serial number Engine model and factory number Automatic transmission model block near the starter. Automatic transmission model number is located on the transmission housing. 268 | Technical Parameters...
Page 274 Technical Parameters Main vehicle dimensions Project Parameter Vehicle height (mm) 1790 Front wheelbase (mm) 1625 Vehicle width (mm) 1910 Rear wheelbase (mm) 1635 Technical Parameters | 269...
Page 275 Technical Parameters Project Parameter Approach angle (°) 25 (unloaded) Departure angle (°) 30 (unloaded) Rear suspension (mm) Wheelbase(mm) 2820 Front suspension (mm) Length of vehicle (mm) 4730 270 | Technical Parameters...
Page 276 Technical Parameters Vehicle technical parameters Vehicle models BJ6470X51MHEV BJ6470X52MHEV Two-wheel drive, front- Drive Type wheel drive Maximum gradeability (% ) Maximum speed (km/h) Curb weight (kg) 1690 1770 Axle load (front/rear) (curb weight) (kg) 946/744 950/820 Total mass (kg) 2123 2205 Axle load (front/rear) (full load) (kg) 1091/1032...
Page 277 Technical Parameters Vehicle models BJ6470X51MHEV BJ6470X52MHEV Toe-in (single side) Camber angle of Front Sus- wheel pension Kingpin caster Parameters for wheel Kingpin inclina- alignment tion angle Toe-in (single side) Rear sus- pension Camber angle of wheel Engine model: A156T2H Engine cylinder arrangement type In-line Engine cooling method Liquid cooling...
Page 278 Technical Parameters Vehicle models BJ6470X51MHEV BJ6470X52MHEV Engine maximum net power/speed (kW/rpm) 113/5000 Engine rated power/speed (kW/rpm) 116/5000 Engine maximum net torque/speed (N·m/ 230/2000~4500 rpm) Engine idle speed (r/min) 1000 Ignition order 1-3/4-2 Remaining unbalance of wheel assembly (g) Total mass of quasi-trailer (T) 235/65R18, 235/60R19 Wheel 18x7J, 19x7J...
Page 279 Technical Parameters Vehicle models BJ6470X51MHEV BJ6470X52MHEV Motor model TZ210XYH02 Rated power of the motor kW Motor rated torque (N·m) Front drive Rated speed of motor (rpm) 4300 motor Peak power of the motor kW Motor peak torque (N·m) Peak torque of motor (Nm) 3940 Motor model TZ180XS268...
Page 280 Technical Parameters Vehicle models BJ6470X51MHEV BJ6470X52MHEV Rear brake Standard dimension disc thick- Wear limit ness (mm) Volume of fuel tank L Combined fuel consumption (L/100km) 5.85 6.45 Attention • hicle and obtained under the driving conditions of low speed, medium speed, high speed, and ultra-high speed.
Page 281 Technical Parameters Attention Oil name Filling Amount SP/C5 0W-20 • The above capacities are approximate values, and the actual usage may vary slightly; Rear powertrain reducer Castrol 384 0.55 lubricant • Unless otherwise specified, the values in this Table are design values, and the actual usage Automatic Transmission Dexron ULV 3.7±0.1...
Page 282 Rescue information Rescue information is used when a serious Warning Warning vehicle accident occurs to facilitate rescuers to • quickly understand the vehicle structure and • The orange-colored cable is the HV har- tery, using a small amount of water for ness.
Page 283 Rescue information Structural stiffening beam HEV car rescue information Gas spring Airbag IGN switch Seat belt 12V battery Gas generator Structural stiffening beam High voltage Fuse box Airbag controller Fuel tank Power battery Electronic components braking module 278 | Rescue information...

BAIC BJ30e Series Operation Instruction Manual

Quick Links

Need help?

Questions and answers

Related Manuals for BAIC BJ30e Series

Summary of Contents for BAIC BJ30e Series