Download Print this page

BAIC X55 II 2022 Manual

page of 263

/ 263
Bookmarks

Advertisement

Quick Links

Download this manual

Introduction

Foreword

Thanks for purchasing this vehicle.

This manual is applicable to X55 Ⅱ models.

Before using the vehicle for the first time, be sure

to read this manual carefully and get familiar with

the vehicle structure, various functions, usage

and related regulations of our company. Any loss

caused by failure to follow the instructions of the

user manual or modification without the approval

of the company will forfeit the right to claim

compensation. The information contained in this

manual would help you master the correct way of

vehicle driving and maintenance, so that you can

enjoy driving pleasure fully. Please keep it

properly after reading.

This manual is intended to provide the user with

instructions on the operation and maintenance of

the vehicle. Please check the purchase contract

for the specific configuration of your vehicle. If

you have any questions about this vehicle and

this manual, please contact the BAIC MOTOR

franchised dealer.

The pictures, data and instructions contained in

this user manual conform to the product

definition at the time of compilation. In view of

the company's continuous modification and

improvement of vehicles, the pictures, data and

instructions contained in the user manual are

only for the introduction of the operation method,

and are not used as the basis for order

acceptance.

We will continue to improve all models.

Therefore, please understand that we reserve

the right to change a certain part of the vehicle,

equipment or technical specifications at any

time. Data relating to delivery, appearance,

performance,

dimensions,

consumption,

specifications

functionality are correct at the time of publication

or marketing. Some of the equipment/features

described in this document may not be available

on your vehicle (please contact the BAIC

MOTOR franchised dealer for details). All

information, illustrations or descriptions in this

manual are not to be regarded as legal

commitments.

The company solemnly reiterates that it is solely

responsible for the revision of this instruction

manual, and reserves all rights and interests

stipulated in the Copyright Law and the right to

modify.

No part of this instruction manual may be

reproduced, reproduced or translated without the

prior written consent of the company, and this

publication may not be reproduced, stored in a

public

search

electronically, mechanically or in any other form.

The "press" in the text description of this manual

indicates that the pressing time is less than 2

seconds and greater than or equal to 0.1

weight,

fuel

second, and the "press and hold" indicates that

and

vehicle

the pressing time is greater than or equal to 2

seconds and less than 1 minute.

The directions mentioned in this manual are

vehicle driving directions.

BAIC International Development Co., Ltd.

Introduction

system,

or

disseminated

July 2022

1

Advertisement

Need help?

Need help?

Do you have a question about the X55 II 2022 and is the answer not in the manual?

Questions and answers

Summary of Contents for BAIC X55 II 2022

Page 1 The directions mentioned in this manual are the vehicle. Please check the purchase contract on your vehicle (please contact the BAIC vehicle driving directions. for the specific configuration of your vehicle. If MOTOR franchised dealer for details).
Page 2 ● instructions in this manual to check the Check the cleanliness of windshield and vehicle, and if necessary, contact the rearview mirror, and working condition of wiper. BAIC MOTOR franchised dealer.
Page 3 It is strictly forbidden to use leaded authorization, for fear of vehicle malfunction gasoline; otherwise the catalytic converter or personal injury. Please go to the BAIC will be damaged. MOTOR franchised dealer to repair and refit 11. Tips on safety: follow the following important the vehicle.
Page 4 "This document in electronic or any other forms. operation is feasible". © All rights reserved by BAIC International Development Co., Ltd. To indicate an item in a diagram. Direction of operation or...
Page 5 Contents Contents Contents Cargo loading..................25 Vehicle overview ................11 Open trunk ................25 Vehicle exterior ................ 11 Open trunk with smart key button ........25 Vehicle interior ................. 12 Trunk opening switch ............. 25 Instrument panel ............12 Open trunk via the center control display ....... 25 Window control button ...........
Page 6 Contents Precautions for seat belt ..........36 Child safety lock............. 64 Check the reliability of the seat belt ........ 38 Interior equipment ..............64 Seat belt pre-tightening and limiting force function* ..38 Interior light ..............64 Maintenance of seat belt ..........38 Grab handle ..............
Page 7 Contents Start ..................92 Cruise control* ............. 129 Vehicle start ..............92 Introduction to ADAS ........... 132 Description of gear ............94 ACC* ................133 Gearshift lever ............... 95 IACC* ................142 Instrument cluster ..............99 LKA* ................146 Instrument cluster view ..........99 Emergency Lane Keeping* ..........
Page 8 Contents Regulation of running-in period ........170 Exterior locking ............... 188 Running-in of engine ............ 171 Sensitive locking with smart key........188 Running-in Tire and Brake Pad ........171 The smart key button is locked ........189 Essentials of brake ............171 Interior lock ................
Page 9 Contents Clean the wiper blade ..........206 Long-term parking of vehicle ..........234 Filling washer fluid ............207 Software upgrade ..............234 Routine maintenance of wiper ........207 Software downloading..........234 Inspection and adding of oil/fluid ..........208 Software upgrade ............235 Opening and closing the engine hood ......
Page 10 Contents Vehicle nameplate ............256 Specification and capacity of oil/fluid ........263 DLC ................256 Microwave window ..............256 Engine and transmission ............257 Safety label ................258 Technical parameters of vehicle ..........259...
Page 11 Vehicle overview Veh icle overview Vehicle exterior 1. Lamps 2. Trunk lid 3. Engine hood 4. Wheel and tire 5. Door 6. Window 7. Electric exterior rearview mirror* 8. Fuel filler flap...
Page 12 Vehicle overview Vehicle interior Instrument panel 1. High tone loudspeaker 2. A/C air outlet 3. Light combination switch 4. Instrument cluster 5. AR-head-up display* 6. Multimedia control button 7. Combination switch of wiper 8. AI interactive light* 9. Center control display 10.
Page 13 Vehicle overview 12. Instrument control button 13. ALS switch 14. Adaptive/cruise control lever* 15. Engine hood release handle 16. Steering wheel adjustment lock lever 17. Brake pedal 18. Accelerator pedal 19. EPB switch 20. Gearshift lever 21. Driver frontal airbag 22.
Page 14 Vehicle overview Window control button 1. Rearview mirror adjustment switch 2. Electric window control switch on driver side 3. Central locking button...
Page 15 Vehicle overview Top control button 1. Emergency rescue (SOS) button* 2. Sunshade switch 3. Reading lamp on driver side 4. Indoor camera* 5. Hazard warning lamp switch 6. Reading lamp on front passenger side 7. Sunroof switch...
Page 16 Preparation before trip Prepar ation befor e tr ip Inspection before driving In the engine compartment After the engine is started ● Fluid level: Before driving: It is best to carry out a safety inspection before driving. A few minutes of inspection will help to ●...
Page 17 Preparation before trip Preset of standby vehicle It is normal to hear the sound of blower for Standby operation ventilation when approaching the vehicle; This function can only be activated once during one Early ventilation* ignition cycle. The function of the early ventilation is to automate the airflow ventilation in the passenger compartment before the user gets on.
Page 18 If your smart key is lost, please contact the BAIC MOTOR franchised dealer as soon as possible to readapt the key in case of the vehicle theft.
Page 19 Vehicle unlocking ● Take a few steps to the left or right, hold the Sensitive unlocking with smart key Do not soak the smart key or clean it in smart key higher, and then try again. If there ultrasonic washer. are other vehicle or object between the smart key and the vehicle, they may block Do not put the smart key together with a...
Page 20 Vehicle unlocking Validation conditions automatic 4. The smart key is not in the vehicle wake-up Emergency unlocking unlocking function range (about 4 meters near the vehicle) for The smart key contains a mechanical key more than 30 minutes. If more than 30 which shall be used in an emergency.
Page 21 Vehicle unlocking 3. Extend the exterior door handle by pressing 4. Insert the mechanical key or other flat objects 5. Turn the door lock cylinder counterclockwise the front area of the exterior door handle; into the open card slot in the lock cylinder cover to unlock and clockwise to lock.
Page 22 It is recommended to emergency locks that come with the door locks. replace it at the BAIC MOTOR franchised dealer. If you replace it by yourself, you need to use CR2032 lithium battery.
Page 23 They may still does not work properly, please contact the inadvertently press the central door lock button BAIC MOTOR franchised dealer. to lock the door; In case of an emergency, it is difficult for a child or person with reduced...
Page 24 Vehicle unlocking Unlocking of door inside handle Automatic collision unlocking If a collision occurs while the vehicle is in motion, and as a result, the airbags inflate and expand, the four doors will be automatically unlocked. For vehicles equipped with sensing hidden handles, the handles will automatically unfold.
Page 25 Cargo loading Cargo loading Open trunk Open trunk via the center control display For vehicles not equipped with an electrical Open trunk with smart key button trunk, you can press the trunk lid unlocking button on the key twice briefly to unlock Updated: 10 minutes ago the trunk lid and pull it upwards to open it.
Page 26 Cargo loading Anti-pinch function Open the trunk with smart key After entering the sensing area, the During the opening and closing process of the high-level brake lamp lights up to indicate trunk, if there is an obstacle, the trunk lid will successful entry.
Page 27 Cargo loading Use the center control display for settings Load Cargo storage space of trunk Trunk storage compartment Trunk lamp Windo Power Door Exterior liftgate rearview mirror Electric function Liftgate height electric liftgate adjustment Electric liftgate intelligent entry Mode 1 Mode 2 Light flashing...
Page 28 Cargo loading Storage compartment of trunk tool box Cargo cover The storage compartment of the trunk tool box is Pull out the rear cargo cover along the arrow and Hold both ends of the rear cargo cover and set under the trunk lid, which can be used after fix it into the fixed slot on the C-pillar middle trim compress them in the direction of the arrow.
Page 29 Cargo loading Shade storage Prohibited articles Do not drive when the vehicle is heavily uneven loaded; otherwise the vehicle will lose Do not place any flammable and explosive balance when turning. article in the vehicle, such as gas lighter, spare gasoline, alcohol, beer, etc.
Page 30 Cargo loading Close the trunk Manual trunk closing* If the key trunk button is pressed twice briefly 1. Gently press the trunk lid close to the rear Electric trunk off* or the open switch is pressed again in the bumper position; process of closing the trunk lid, the trunk lid will stop moving.
Page 31 Cargo loading Observe the following precautions when using the trunk. Otherwise, the body part may be trapped and cause serious injury: ● When the trunk lid is turned upward, the trunk lid will bounce to the fully open position. Pay attention to the safety of the top.
Page 32 Entering vehicle Enter ing veh icle Open the door In severe winter conditions, icing in the door handle may make it impossible to open. To avoid a lot of icing inside the door handle, pop the door handle out after washing, dry the door handle and door the outside.
Page 33 Entering vehicle Welcome lighting Ambient light* Welcome light Exterior courtesy lamp Ambient Commo Light light Door window Light Vehicle sound effect Driving Driver Other assistance Intelligent Musical rhythm mode settings Intelligent Instrument Brightness of Ambient light cluster and HUD greeting color ambient light Intelligent door entry...
Page 34 Riding vehicle Riding v ehicle Seat belt 4. Loosen the adjuster guide block; The upper part of the seat belt clings to the chest and across the shoulder, and the lower part of 5. After adjusting the height, pull the seat belt Seat belt height adjustment* the seat belt clings to the hip.
Page 35 Riding vehicle Locking of seat belt Adjustment of the seat belt Seat belt unlocking Pull the seat belt gently to adjust the length of Press the red button on the buckle to release Pull the seat belt out of the retractor slowly, then the seat belt.
Page 36 Riding vehicle Wearing rear seat belt Pregnant women wear seat belt Precautions for seat belt All seats of this vehicle are equipped with three-point seat belt. Some models have adjustable front seat belt pivot, and some models have pretensioner in the lower retractor.
Page 37 It is strictly forbidden to modify the Seriously dirty seat belt may cause the upper body of the occupants at the moment of seat belt in any way. Please go to the BAIC retractor not to be retracted smoothly. collision to ensure that the occupants are MOTOR franchised dealer to repair the seat ●...
Page 38 If the retractor cannot lock the Maintenance of seat belt seat belt, please go to the BAIC MOTOR Regularly check whether the seat belt and all its Even if the vehicle speed is very low, in case of a franchised dealer for inspection or repair.
Page 39 If the seat belt retractor is repaired by a repair shop not authorized by BAIC MOTOR or by non-professional personnel, or if the seat belt retractor is not properly used according to the regulations, it will increase the potential risk of injury or death.
Page 40 Riding vehicle ● ● ● Adjust the steering wheel to keep at least During driving, the seat back cannot be tilted During driving, the seat back cannot be 25cm between the chest and the steering too much. You must wear the seat belt tilted too much.
Page 41 Riding vehicle Electric adjustment of the lumbar support* Direction① adjust the seat backward Direction Front row: the seat back can be turned ③ ②adjust the seat upward Direction seat is forward (22.5±2) ° and backward (52.5±2) ° at the ④ maximum adjustable angle of (75±...
Page 42 Longgang Telephone number of Central City Seat greeting There's nothing else BAIC customer service on the agenda today. Nayuki Exterior courtesy lamp Interior courtesy lamp After adjusting the seat position, press and hold sitting posture 1 or sitting posture 2 or sitting...
Page 43 Riding vehicle Front seat heating* Front seat ventilation* Ventilation and heating cannot work at the same time. To avoid damaging the electrical components in the front seat, do not kneel on the seat or apply pressure to any single point in the seat cushion or seat back.
Page 44 Riding vehicle Adjustment of steering wheel position It is forbidden to adjust the steering wheel position when the vehicle is running in order to avoid accidents. The lock lever must be pressed firmly to prevent the position of the steering wheel from changing during the vehicle is in motion.
Page 45 Riding vehicle Multi-function steering wheel key Instrument control button : One-click photo taking (short press) / quick video recording (long press)* Multimedia control button The multi-function steering wheel is equipped : Home / Back with the following function keys: ① Instrument control button : AVM * Scroll up roller: Scroll up : Answer the phone : speech...
Page 46 Riding vehicle Interior rearview mirror Manual anti-glare interior rearview mirror* Before driving the vehicle, adjust the interior rearview mirror to get the best view, and keep the interior rearview mirror clean. In order to ensure driving safety, adjust the rearview mirror and minimize the "blind spot" of the view.
Page 47 Riding vehicle Exterior rearview mirror Glass angle adjustment* Exterior rearview mirror heating* The exterior rearview mirror has the functions of electric adjustment, electric heating and electric folding*. The object image reflected by an exterior rearview mirror is smaller than the real object. Objects are actually closer to the vehicle than they appear.
Page 48 Riding vehicle Power window control switch on driver side ① Press down switch and hold, and then the Do not turn on the rearview mirror heating door window on the driver's side rises and stops function without special necessity, so as to avoid when you let go.
Page 49 Riding vehicle Passenger door window lifting prohibition Window position anti-pinch learning and Be sure to operate the window switch switch initialization manually. Raising and lowering the window need Press down the lifting inhibit switch ③ of the When the vehicle of the equipped door window to be completed continuously.
Page 50 Riding vehicle For vehicles with the function of locking the car and closing the window, please operate the function of locking the car and closing the window after 30 seconds, and then operate the function of opening the window by long pressing the key.
Page 51 Riding vehicle Panoramic sunroof During the operation of the sunroof, if the If the toggle time is less than 0.5 seconds, it sunroof switch ① is moved forward, the sunroof Panoramic sunroof switch is automatically opened/closed with one key. If will stop sliding.
Page 52 Riding vehicle Anti-pinch function of sunroof High-speed automatic closing of sunroof Continuous opening and closing of the The anti-pinch function prevents large items from sunroof for many times may cause the sunroof being trapped when the sunroof is closed. If the thermal protection to stop working.
Page 53 Riding vehicle Rear seat Adjustment of rear seats head restraint In order to ensure the driving safety, the The correct sitting posture of rear passenger driver is forbidden to operate the sunroof switch during the vehicle running. In order to ensure safety, the rear passenger should do the following: The sunroof may stop monitoring the ●...
Page 54 Riding vehicle Rear seats folding Folding of seat back If you need to place large items in the vehicle, you can fold the rear seat back to increase the cargo storage space of trunk. The left and right sides of the rear seats can be folded separately.
Page 55 Riding vehicle Seat back folding recovery Rear seat back angle adjustment* Safe riding of children Move the seat belt to the outside, flip the seat Correct child's seat back unlocking switch upward, and then push Accident statistics confirm that a child sitting in a the seat back to its original position.
Page 56 Riding vehicle When carrying more than one child Assemble child safety seat Never leave the child alone in the car; ISOFIX child safety seat anchorages are It is recommended to carry with the child safety otherwise, it may cause fatal injury to the child if provided on the seat on both sides of the rear seat instruction manual.
Page 57 Riding vehicle The child safety seat classification level is for reference only. Warning Do not place backward child safety seat on the seat protected by the safety airbag; otherwise death or serious injury may occur. It is forbidden to place the child safety seat A warning sign is attached to the sun visor on the 0/0+ group child safety seat: front passenger’s side of the vehicle to remind...
Page 58 Riding vehicle Group I child safety seats: Group II child safety seat: Group III child safety seat: For infants or toddlers less than 4 years of age For child under 7 years old and weighing For child over 7 years old and weighing between and weighing between 9 kg and 18 kg, Group I between 15 kg and 25 kg, it is best to use the 22 kg and 36 kg and height below 1.5 m, it is...
Page 59 Riding vehicle Lower the lap belt of the seat belt, but do not apply to the abdomen, and keep it close to the body, and adjust the seat belt if necessary. Correctly install the child safety seat Before installing the child safety seat in the rear seats, the front seat must be adjusted to the proper position according to the size of the child safety seat and the body shape of the children,...
Page 60 Riding vehicle The way of using the intelligent child safety 2. When the app finds the device successfully, The top tether is detected only after each seat please read the seat connection instructions and power-on. After the tension is detected, if the click "Connect Device".
Page 61 Riding vehicle Seat alarms (such as ISOFIX connection abnormality, top tether installation abnormality), fault information (fan failure or heating failure) will be saved in this page, and the user can read, delete and so on.
Page 62 Riding vehicle Fixed position corresponding to the child safety seat Fixing position Quality Group Size category Fixing module Seat on both sides of Front passenger seat Rear middle seat the rear row ISO/L1 IL** Portable bed ISO/L2 IL** Group 0: <10 kg ISO/R1 ISO/R1 Group 0+ : <13 kg...
Page 63 Riding vehicle Suitability of child safety seat in seats fitted with airbag or curtain airbags Table of applicability of airbag condition to child safety seat Front seats Rear outboard seats Applicable group Rear middle seat Backward Airbag ON Airbag OFF Forward mounting installation Group0...
Page 64 Riding vehicle Child safety lock Interior equipment In order to prevent the interior child from Interior light inadvertently opening the rear door, causing accidents, it is recommended to enable the child Front reading lamp safety lock when taking the child. A door in which the child safety lock is enabled so that the door can only be unlocked from the outside of the vehicle.
Page 65 Riding vehicle Vanity mirror lamp Console lamp Intelligent greeting Intelligent door entry Seat greeting Exterior courtesy lamp Interior courtesy lamp The interior courtesy lamp can be turned on/off Turn on the sun visor, slide and open the vanity There is a lamp under the console to illuminate through the center control display.
Page 66 Riding vehicle Adjustment of backlight brightness Rear lamps Grab handle Ambient light Common Light Door and window Accompany me home. After locking the car, the low beam will be on for a while and then go out, illuminating the way home for you. 30 seconds 60 sec 10 sec...
Page 67 Riding vehicle Sun visor Side overturn sun visor Vanity mirror Turn down the sun visor First, open the sun visor downwards, then Slide the vanity mirror cover on the sun visor and remove the hinge on the right side of the sun you can use the vanity mirror.
Page 68 Riding vehicle 12 V power outlet 12 V power supply in the trunk Central armrest 12 V power supply Front USB interface Only when the keyless start/stop button is in the "RUN" mode, the USB interface and the 12 V power supply are powered.
Page 69 Riding vehicle USB interface of central armrest Rear USB interface USB interface: used to connect USB devices. The USB interface only supports charging The rear USB port is located at the rear of the function and does not support multimedia central armrest box.
Page 70 Riding vehicle Mobile phone wireless charging* In-car storage space Metal mobile phone protective cases or thicker mobile phone protective cases can affect Do not place heat-resistant items such as wireless charging function. chocolate or medicine and unsealed tea cups in the car storage box.
Page 71 Riding vehicle Storage box on the door interior trim panel Storage box of front center armrest on driver side The storage box on the door interior trim panel Pull up the front part of the center armrest to When the cooling function of the A/C is turned on driver side can be used to store items such as open the compartment lid.
Page 72 Riding vehicle Glove box Positioning groove of front tea cup Front row storage box Press the glove box switch to open the glove Drink bottle or sealed cup can be placed in A storage box is provided under the center box, and push the glove box cover up to close positioning groove of front tea cup.
Page 73 Riding vehicle Front seat storage slot Rear seat center armrest (with cup holders) Front seat back storage bag There is a storage slot in front of the gearshift Pull down the seat center armrest to open the The storage bag behind the front seat back can lever for placing mobile phone, tickets, cards and rear seat center armrest.
Page 74 Riding vehicle Airbag function In case of a serious collision, drivers and passengers who do not wear seat belts cannot Description of SRS control themselves, and will move randomly or The SRS plays an auxiliary protective role. In be thrown out of the vehicle. Even if the airbag order to give full play to the protective role of the deploys rapidly, it cannot protect the human triggered airbag system, drivers and passengers...
Page 75 In case of an accident. seat belt pretensioner may not work normally In If the vehicle is scrapped, the undeployed airbag case of a collision. Please go to the BAIC is potentially dangerous, so when scrapping the MOTOR franchised dealer for inspection in time: vehicle, the airbag must be safety detonated by ●...
Page 76 To ensure the best protection function in follows. case of severe impact, please keep the correct Please contact the BAIC MOTOR franchised sitting posture. dealer as soon as possible in case of any of the Front side airbag following: ●...
Page 77 Please contact the BAIC MOTOR franchised It is forbidden for the driver and front dealer as soon as possible in the following cases passenger to lean their heads or bodies against ●...
Page 78 Side curtain airbag does not deploy in contracts in a very short time and can only work all side collision accidents, and does not deploy Please contact the BAIC MOTOR franchised once, and does not provide protection from a in frontal collision, rear collision, or most dealer as soon as possible In case of any of the second side impact that may occur later.
Page 79 Riding vehicle Situations where the airbag may deploy Rear-end collision or collision Please wear your seat belt correctly; otherwise, case accident, deployment of the airbag may impact the occupants, resulting in serious injury or even death. Situations where the airbag may not deploy In a collision, the airbag determines whether to deploy based on the strength, impact angle, speed, and impact point of the collision.
Page 80 Riding vehicle Side collision Oblique collision (angled collision) In case of a side collision, the driver and In case of a side impact outside the passenger In case of a side collision, the driver and passengers will be displaced laterally, so the compartment, where the body is subjected to a passengers will be displaced laterally, so the airbag deployed from the front will not protect...
Page 81 Riding vehicle Rear-end collision Rollover accident Special collision In case of a rear-end collision with a large truck, The frontal airbag may not deploy in a rollover If the vehicle collides with some fine objects such driver instinctively makes emergency accident, and at this time, the frontal airbag as electric poles or trees, in such collision, the braking, and the front of the vehicle body sinks at...
Page 82 Riding vehicle Collision at the bottom of the vehicle Crossing a pit If the vehicle suffers severe impact, such as falling or leaping steps, hitting curbs or hard objects, crossing deep potholes, even if the vehicle is slightly deformed, the airbag may be deployed when detected...
Page 83 Smart mobility Sm art mo bilit y Center control display and front passenger panel Center control display 1. Vehicle control setting 2. UPA switch 3. Parking assist switch* 4. Driving mode switch 5. Trunk OPEN button 6. Main interface 10 minutes 7.
Page 84 Smart mobility The A/C works only when the engine and A/C system blower are turned on. The A/C will stop cooling when the blower is turned off or the outside The vehicle A/C system is a device that realizes temperature is near zero. refrigeration, dehumidification, heating,...
Page 85 Smart mobility A/C control interface 1. A/C on/off key (A/C key) 2. A/CMAX key 3. Full automatic operation key (AUTO key) 4. Recirculation/fresh air selector button 5. Air purification switch* 6. One-touch heating 7. One-touch cooling 8. Mode switching area 9.
Page 86 Smart mobility 1. A/C system on/off key (A/C key) 3. Full automatic operation key (AUTO key) 6. One-touch heating Touch ON/OFF button (A/C) of the A/C system Touch the AUTO button A/C system to enter the Touch one-button heating button, and then the and the compressor will start to run.
Page 87 Smart mobility In the fan speed control area, drag the gear icon Pressing the SYNC key in single-zone control When the A/C system is cooled, there may to the right to increase the wind speed. The mode will switch to the Dual zone mode, that is, be water stains on the floor under the vehicle, maximum wind speed is 8th gear.
Page 88 Smart mobility 13. System shutdown key (OFF key) 17. Right temperature zone temperature 19. Rear windshield defrost/defog button control button When the A/C system is turned on, touch the Touch the rear windshield the defrost/defog system OFF button and the system enters the When at the non-A/C interface, touching this key button to activate the function, and the button standby.
Page 89 Smart mobility Using A/C Reduce humidity Maintenance of A/C The A/C can provide cooling, heating and The A/C can reduce the humidity of the air in the The maintenance work related to the A/C system dehumidification functions. It can reduce the vehicle and quickly demist the window in a should be carried out by qualified technicians.
Page 90 Smart mobility Air outlet Central air outlet Left air outlet ① Air outlet on both sides Toggle the paddle in the middle of the air outlet Toggle the paddle in the middle of the air outlet to adjust the airflow direction. to adjust the airflow direction.
Page 91 Smart mobility Right air outlet Rear row air outlet Toggle the paddle in the middle of the air outlet Toggle the paddle in the middle of the air outlet to adjust the airflow direction. to adjust the airflow direction. Slide to the right to open the air outlet, and slide For the right air outlet, slide to the left to open the to the left to close the air outlet.
Page 92 Driving operation Driving op er ation ● ● Start When the start/stop button is in the "RUN" When the button is not pressed: the mode, check whether each warning lamp start/stop button is turned off, that is, in the Vehicle start functions normally.
Page 93 P or N gear to start", the vehicle will not engine still cannot be started after 5 consecutive start, and the start / stop button jumps to "RUN" times, please contact the BAIC MOTOR mode. franchised dealer for inspection and repair.
Page 94 Driving operation ● Standby start with smart key When the smart key battery power is When the vehicle engine fails to start, if you insufficient and the battery cannot be If the vehicle is in a strong signal interference want to shift the trailer to N gear, please operate replaced in time.
Page 95 Driving operation Gear D (D position) Gearshift lever The gear will automatically switch to P gear The gearshift lever is in this position in normal in the following cases: Do not put the gearshift lever in D position driving mode, where the transmission will ●...
Page 96 Driving operation Set the gearshift lever to R, N, D position: Set the gearshift lever to gear S (sports mode): Set the gearshift lever to +/- gear (manual mode): When parking, to shift out of P gear or set the After setting the gearshift lever to D gear, press gearshift lever to R/N/D position, you need to the gearshift lever backwards to switch to S...
Page 97 Driving operation Vehicle start and stop The vehicle will start the corresponding gear 1. Step on the brake pedal to the bottom, set the shifting procedure according to the change of gearshift lever to "P" gear or "N" gear, and start resistance (such as towing, climbing long slopes, the engine;...
Page 98 Driving operation After the D position is selected and the engine is When the AVH is in standby state, and the running, do not leave the vehicle stationary (if gear lever is in "D" or "R" position, depress the you want to idle for a long time, set the gearshift brake pedal while driving.
Page 99 Driving operation Instrument cluster Instrument cluster view 1. Odometer 2. Trip computer display area (engine speed, trip information, navigation, etc.) 3. fuel gauge 4. ADAS information 5. Engine coolant temperature gauge...
Page 100 Driving operation Odometer Fuel gauge The distance you can drive can be estimated and displayed based on the driving mode available and the fuel in the tank. The driving range may increase further if the vehicle is driven more economically or in better road conditions.
Page 101 Driving operation Engine speed Engine coolant temperature gauge Instrument control button The tachometer indicates the revolutions per This gauge indicates the temperature of the : return minute (x1000 rpm) of the engine. The engine coolant. During normal driving, the blue Scroll up roller: page up tachometer can also assist in evaluating the indicator bar shall be near the middle position.
Page 102 Driving operation Trip computer Driving information Odometer: The odometer interface displays the total mileage and maintenance mileage of the vehicle. The odometer indicates the total distance that the vehicle has driven, with the display range of Total mileage (km) Total mileage (km) 2000000km 0～...
Page 103 Driving operation Self-reset: Self-reset mode: Self-restart: The self-reset interface shows the trip meter, 1. Press and hold the roller for 5 s to reset it The self-restart interface displays four kinds of average fuel consumption, average speed and information, i. e. trip meter, average fuel directly in the display interface;...
Page 104 Driving operation Self-restart reset mode: Self-fueling: Reset mode of self-fueling: 1. Press and hold the roller for 5 s to reset it The self-refueling interface shows four kinds of 1. The fuel quantity change is detected to be information: trip meter, average fuel...
Page 105 Driving operation Instantaneous fuel consumption: Historical fault inquiry: Bluetooth telephone: The transient fuel consumption indicates the magnitude of the transient fuel consumption, which can help the user adjust his driving habits to achieve the desired fuel consumption. The running time is the accumulated time of this Failure of emergency braking system driving.
Page 106 Driving operation Navigation: Multimedia: Closures ajar reminder The door, hood and tailgate are open 296 m access Binhai avenue The navigation function can display map and The multimedia interface contains music and If the door, engine hood and trunk lid are not navigation information.
Page 107 Driving operation Instrument cluster alarm indicator lamp 1. EPB fault indicator lamp 2. Fault indicator lamp 3. Cruise control indicator lamp* 4. Electric exterior rearview mirror fault indicator lamp* 5. LDW indicator lamp* 6. High beam turn-on indicator lamp 7. Transmission fault warning lamp 8.
Page 108 Driving operation 16. Charging indicator lamp 17. ACC indicator lamp* 18. Left turn signal indicator lamp 19. RDP indicator lamp* 20. Low beam on indicator lamp 21. Rear fog lamp on indicator lamp 22. High water temperature warning lamp 23. Engine system fault warning lamp 24.
Page 109 Driving operation 31. AVH operation indicator lamp 32. IACC operation indicator lamp* 33. LKS indicator lamp* 34. Right turn signal indicator lamp 35. Lighting system fault indicator lamp 36. IHA status indicator lamp* 37. Position lamp indicator lamp 38. Engine immobilizer indicator lamp 39.
Page 110 LDW indicator lamp (green) will be lit. comes on during driving, please contact the is faulty. In case of a gearbox failure, the vehicle BAIC MOTOR franchised dealer When the LDW system is in standby, the LDW performance will be significantly degraded and troubleshooting.
Page 111 Driving operation In case of the above situation, pull over and When the GPF is to be serviced, the (red) Door ajar indicator lamp (red) check the tire if the safety is ensured. indicator lamp * is lit. When the instrument It indicates the opening and closing state of the cluster prompts "GPF saturation, the user shall four doors, engine hood and trunk lid.
Page 112 High water temperature warning lamp the vehicle immediately and contact the BAIC lamp is faulty. Please go to a nearby BAIC (red) MOTOR franchised dealer for inspection and MOTOR franchised dealer for inspection and repair as soon as possible if the safety is When the start/stop button is in the "RUN"...
Page 113 If this warning lamp comes on during driving, light is on. faulty. The instrument cluster displays the contact the BAIC MOTOR franchised dealer for prompt message "Please check ESP" with a inspection and repair as soon as possible. If no AEB system fault indicator lamp* sound.
Page 114 (yellow) will light up. is faulty. Please go to a nearby BAIC MOTOR AVH indicator lamp (green) franchised dealer for repair as soon as possible. LKS indicator lamp (green)*...
Page 115 (yellow) lights up, please contact the BAIC Rear seat belt warning lamp (red) * When the system starts and recognizes, for...
Page 116 If the warning lamp does not light up during repeatedly. the self-test, it indicates that the SRS or warning Electric power steering system fault lamp is damaged. Please go to a nearby BAIC warning lamp (yellow) MOTOR franchised dealer for repair as soon as possible.
Page 117 When temperature of the tire. Under normal conditions, contact the BAIC MOTOR franchised dealer the vehicle starts to run, the system will update the tire pressure information in the instrument immediately.
Page 118 BAIC MOTOR franchised dealer to install and adapt the tire pressure sensor (vehicle spare wheel does not have this tire pressure sensor). After tire rotation, you should go to the BAIC MOTOR franchised dealer to readapt the tire When the tire pressure monitoring system pressure sensor;...
Page 119 HUD is precision optical equipment. If you the clarity and integrity of the HUD image. have any other problems, please contact the Do not place any foreign matter on the HUD BAIC MOTOR franchised dealer for handling. light-transmitting cover; otherwise, Unauthorized personnel are not allowed to damage the HUD light-transmitting cover.
Page 120 Driving operation Driving vehicle Pedal area Footrest on driver side The footrest shall be fixed in the footwell. Please Precautions for driving and riding make sure that the footrest clings to the carpet A driver must obtain a driver's license before and that there is a certain distance between the driving a vehicle.
Page 121 Driving operation Driving mode Sports mode (SPORT): It improves the power performance of vehicle, giving priority to ensuring the power performance and acceleration of vehicle. It is suitable for the 12.5 km Beijing flat road with less vehicle and good road conditions.
Page 122 ESP system is faulty and the vehicle should drive to the nearest BAIC ESP system can improve the driving stability of The electronic stability system (ESP) has MOTOR franchised dealer at low speed for the vehicle, such as in acceleration and bends, some limitations on vehicle stability control.
Page 123 At this time, you should drive to the and does not mean that there is a fault. nearest BAIC MOTOR franchised dealer at a low During the emergency braking, never release the The EBD automatically adjusts the distribution...
Page 124 In this case, provided that safety is mode. ensured, pull over immediately and contact the Brake wear indicator BAIC MOTOR franchised dealer for inspection The brake pad is equipped with an abrasion and repair. sound indicator. If you hear harsh squealing or...
Page 125 Driving operation Automatic release or application of EPB Precautions for parking safety Do not park the vehicle on flammable With the keyless start/stop button in "RUN" mode materials such dead leaves hay. Do not park vehicle near the flammable and and the parking brake applied, when the vehicle Otherwise, hot engine or exhaust pipe may ignite explosive article to avoid fire.
Page 126 Driving operation 5. In case of parking on the ramp, in order to Execution prevent the vehicle from entering the driving The AVH helps keep the vehicle stationary in With the AVH in standby state and the gearshift road when accidentally moving, when parking any stationary condition.
Page 127 Driving operation When the vehicle speed is ≤35 km/h, touch the After the vehicle with AT is parked, the The HDC helps the driver actively brake the HDC switch , and the HDC enters the parking brake should be applied before setting vehicle in downhill conditions (the maximum the gearshift lever to the "P"...
Page 128 In this case, gently step on the brake brake pedal during braking, and drive at a low pedal several times to remove the salt on the speed to the nearest BAIC MOTOR franchised brake disc and brake pad. dealer.
Page 129 In this condition, you should weather (such as fog, rain, snow, hail, etc.), and pull over with safety, contact the BAIC MOTOR on slippery road, steep slope or curves, so as to Cruise control is a kind of system in which the franchised dealer and wait for rescue.
Page 130 Driving operation Turning on/off cruise control 3. Pull down the control lever to set the vehicle Increasing/reducing cruising speed to cruise control at the current speed, and the green cruise control indicator lamp in the instrument cluster will light up. If the vehicle speed memory is not cleared, pull the control lever upward to resume cruise control at the last memorized vehicle speed;...
Page 131 Driving operation ● Overtaking Pull the control lever backward. ● When you need to overtake, press the When ESP is in operation. accelerator pedal to accelerate. After you Resuming the cruise control release the accelerator pedal, the vehicle will After cruise control temporarily...
Page 132 If the front windshield or bumper needs to be Do not install any metal or alloy (including The ADAS can actively monitor the road replaced, send the vehicle to the BAIC MOTOR electroplating) decoration on the bumper in front conditions around the vehicle to achieve driving franchised dealer.
Page 133 Driving operation ACC* Towing trailers will degrade the dynamic ACC uses MMR to detect the relative distance performance of the ACC system. and relative speed between the vehicle in front and the vehicle on the basis of traditional cruise The ACC function can provide driving control, and controls the vehicle's speed assistance for the driver, but it cannot replace automatically, so as to achieve the purpose of...
Page 134 Driving operation ACC system will cause a certain degree of Due to safety, ACC cannot be activated If the vehicle with the ACC system activated performance degradation when the camera is when ESP is not enabled. is too close to the vehicle on the adjacent lane blocked or faulty.
Page 135 Driving operation Detection problem During the theme switching process, the The radar may be unable to detect the target instrument cluster cannot display the status of vehicle or delay the detection in the following the ACC system and related prompt alarm cases: information.
Page 136 Driving operation 3. Ramp 5. Stationary vehicle ahead 4. Vehicle with special loads/equipment When the vehicle enters the ramp, the radar may The radar cannot reliably identify a stationary The radar is unable to detect items or not be able to detect the vehicle ahead. vehicle ahead.
Page 137 Driving operation The system brake may make a sound when ACC is working. This phenomenon is normal and you can use it safely. ACC will cause vehicle braking when brake is not required or when you do not intend to brake. This may be caused by the detection of vehicles or objects in adjacent lanes (especially on curves).
Page 138 Driving operation Turning on/off ACC Open the interface: Activating/deactivating ACC ACC can be activated by pulling the control lever toward the steering wheel or pulling the shift lever up or down when ACC is ON and the IACC Forward assist Side rear assist Common system meets the activated conditions.
Page 139 Driving operation Increasing/reducing target speed After the ACC function is enabled, the The ACC will be deactivated automatically following conditions must be met for the ACC to when the following conditions occur: work normally: ● Turn off the IACC function in the center ●...
Page 140 Driving operation Adjustment of headway Resuming ACC After ACC is activated, pull down the control After the ACC is disabled, pull back the control When ACC is activated, turn the control knob to lever, and the target speed will decrease by 5 lever, and the ACC will be reactivated at the adjust the time gap between the vehicle and the km/h.
Page 141 Driving operation Vehicle following stop/start When ACC is activated, depress the brake Be sure to go to the BAIC MOTOR franchised pedal, the vehicle decelerates continuously, the dealer for professional calibration of the radar in ACC system can control the vehicle to stop...
Page 142 Driving operation IACC* The IACC cannot cover all driving scenarios The IACC system may falsely detect the lane Please read and familiarize yourself with the and traffic, weather and road conditions. Even marking or fail to detect the lane marking, and entire contents of this chapter before using the may falsely detect or fail to detect a target the system is active, the driver must drive...
Page 143 ● Driver intervention when the system works; an abnormality, and immediately go to the ● ● The lane marking is not clear, such as in APA is activated; BAIC MOTOR franchised dealer case of crossing or converging, etc.; ● overhaul;...
Page 144 Driving operation ● When the vehicle tire pressure is too high or Turning on/off IACC Display interface too low, but does not necessarily reach the alarm status; ● IACC Forward Side rear The road is bumpy and uneven; assist assist ●...
Page 145 Driving operation ③ indicates the identified target vehicle and will Activating/deactivating IACC Resuming IACC be highlighted after the system identifies the When the main cruise switch is on and the target vehicle. system meets the activation conditions, first activate ACC by setting the control lever to ④...
Page 146 When the system fault is indicated, please IACC system's brake capability is limited, and contact the BAIC MOTOR franchised dealer for when the system requires driver to intervene in inspection. The user can turn on/off the LDW function...
Page 147 Driving operation Display interface LDW sensitivity When LDW is activated, it can exit if any of LDW sensitivity refers to the trigger frequency of the following conditions are met: LDW alarm. In high sensitivity, there are fewer ● The vehicle speed is less than 55 km/h or conditions to suppress alarm, and in low the vehicle speed is greater than 150 km/h.
Page 148 When the system fault is indicated, please Graphic Graphic + sound concentrate, hold the steering wheel, be ready to contact the BAIC MOTOR franchised dealer for Sensitivity make steering corrections or take over the inspection. High vehicle;...
Page 149 Driving operation ● Turn off the LKA switch button. Display interface LKS sensitivity ● The lane is too wide or too narrow. The sensitivity of LKS refers to the trigger frequency of LKS. In high sensitivity, there are When the vehicle is in backlighting, glare and fewer conditions for inhibition, and in low other environmental conditions, the LKS function sensitivity, there are more conditions for...
Page 150 When the system fault is indicated, please or property damage. contact the BAIC MOTOR franchised dealer for inspection. When the camera is covered by rain, snow, The user can turn on/off the RDP function mud, ice, etc., this function will not work, so the...
Page 151 Driving operation Display interface RDP sensitivity When RDP is activated, it can exit if any of RDP sensitivity refers to the trigger frequency of the following conditions are met: RDP alarm. In high sensitivity, there are few ● The vehicle speed is less than 55 km/h or conditions to suppress alarm, and in low the vehicle speed is greater than 150 km/h.
Page 152 This function only plays an auxiliary role and When encountering situation contact the BAIC MOTOR franchised dealer for does not replace the control of the driver. increasing lanes or lane merging, this function inspection. may malfunction or not work, the driver shall...
Page 153 BAIC function can be restored automatically: MOTOR franchised dealer for repair. ● The vehicle speed is less than 55 km/h or TLA* the vehicle speed is greater than 150 km/h.
Page 154 Users can turn on/off the FCW function, and set please go to the BAIC MOTOR franchised dealer for handling. FCW sensitivity in the center control display. Forward collision warning system...
Page 155 Driving operation Early warning Improper modification of vehicle (such as The FCW system cannot guarantee that During the driving process, when there is a risk lowering the chassis height, changing the front collisions will avoided under of collision between the vehicle and the vehicle license plate of the vehicle, etc.) may degrade circumstances, and the driver must maintain in front, the system will give visual and audible...
Page 156 Driving operation ● ● Pedestrians carry large items or wear Initialization of system. Drivers always have the responsibility to take clothing that makes the outline unclear. ● Instrument cluster failure. timely and effective braking measure. ● The vehicle is not shifted into the forward When loading goods, do not make the When parking distance control is affected by gear.
Page 157 Driving operation ● In case of cross-driving vehicle. AEB system* ● There is a stationary obstacle ahead (e.g., a Turning on/off AEB broken vehicle). Danger of collision, ● There is an oncoming vehicle ahead. Please brake! Common IACC Forward Side rear ●...
Page 158 Driving operation Improper modification of vehicle (such as When the ESP function is enabled or the If the camera is blocked by bird droppings, lowering the chassis height, changing the front malfunction lamp is on, the AEB function will be dirt, ice, insects, etc., the warning and auxiliary license plate of the vehicle, etc.) may reduce the disabled.
Page 159 Driving operation ● Driving in snowy or rainstorm days AEB is only a driver assistance function. The AEB system may not work in the ● Narrow vehicles (e.g. motorcycle) moving There is a risk that pedestrians cannot be following cases: ahead.
Page 160 Driving operation Driving at night Low beam High beam Exterior lamp Position lamp When the start/stop button is in "RUN" mode, When the low beam lights up, push the light turn the light control knob so that the mark control lever forward to turn on the high beam, and pull the light control lever back again to turn on the light control knob ①...
Page 161 Driving operation High beam warning The headlamp comes on in an automatic way. Turn signal lamp Pull the light control lever down or up thoroughly, Pull back the light control lever and the high When the start/stop button is in "RUN" mode, turn the light control knob ①...
Page 162 Driving operation Lane change flashing signal Rear fog lamp control Manual headlamp leveling The illumination angle of the low beam is Toggle the light control lever downward or When the start/stop button is in the "RUN" mode affected by the weight distribution of passengers upward gently, then release the control lever, it and the light control knob is in the position...
Page 163 Driving operation Automatic lighting function Alarm for lights on in a car in motion Accompany me home. When the light switch is in AUTO gear, the When the Start/Stop button is in "OFF" mode, vehicle will light up according to the surroundings the light switch is in the position lamp or low Light Ambient...
Page 164 Driving operation IHA* After the function is turned on, when the light It can set the follow-me-home on/off and handle is turned to AUTO position and the low The IHA judges the current driving situation lighting time through the center control display. beam is on, the vehicle speed is greater than 40 through the camera, and controls the automatic km/h, and the headlamp can be switched...
Page 165 ● The lamps of oncoming vehicle are blocked The use of non-BAIC MOTOR original by fences, shrubs, partitions, etc. ① HI: high-speed wiping windshields will adversely affect the IHA. ●...
Page 166 Driving operation ⑤ MIST: single wiping Rain/light sensor Under extreme working conditions, when Rain/light sensor is located on the front Pull the wiper control lever upward to the MIST driving on the expressway in rainy days, the windshield near the interior rearview mirror. If the position, release the automatic to return to the acceleration adjacent...
Page 167 Driving operation Release it to stop spraying. The front wiper When the front wiper is working, set the gearshift When the rear wiper is off, rotate the rear wiper continues to wipe several times and then stops lever to the "R" for more than 1 second, and the control knob downward to align the mark automatically.
Page 168 When winter comes, please go to the BAIC MOTOR franchised dealer for vehicle winter ● When driving through water, do not stop the Do not open any door while wading.
Page 169 Select the oil suitable for low temperature Do not install tire chain that is not approved by the gearshift lever is set to D position after viscosity; the BAIC MOTOR. Improper snow tire chain will starting. This phenomenon is only obvious after ● Select...
Page 170 Driving operation Winter tire Driving on special road Driving points Long uphill driving Regulation of running-in period Winter tires can greatly improve the handling When driving on a long uphill section, please In order to improve the service life of the vehicle, stability of vehicles when driving on the snowy reduce the pressure on the accelerator pedal the new vehicle should be run-in at the initial...
Page 171 Driving operation Running-in of engine Running-in Tire and Brake Pad Essentials of brake After the engine is run in as required, it can not In the first 500km, the vehicle should be driven at Never use the brake pedal as a footrest. If you only prolong the service life, but also reduce the rest your feet on the brake pedal while driving, a moderate speed to run in the new tire.
Page 172 Drive with traffic lights to reduce the number of Be sure to drive at a low speed in side gusts the BAIC MOTOR franchised dealer for stops. Try to choose the road without traffic light so that vehicle can be controlled easily.
Page 173 Driving operation Refueling In order to ensure the vehicle performance, the Try to avoid the water depth of the road unleaded petrol (92# and above) in accordance surface when driving, to avoid the brakes from with this vehicle must be used. getting wet.
Page 174 Contact the authorized dealer of BAIC MOTOR be always on, indicating that the electric power steering system is not working properly. Please franchised to thoroughly clean the fuel system.
Page 175 Driving operation Boost mode setting The electric power steering mode can be set to follow the linkage driving mode. When it is turned on, the driver can make the steering mode EPS mode Linkage with driving mode automatically switch correspondingly Comm Standard Sports...
Page 176 Parking assist Par kin g assist UPA* Use of UPA Brief introduction of UPA The UPA system is a safety aid used when the Updated: 10 minutes vehicle is parking or reversing. It uses ultrasonic wave to detect the approximate distance Twenty-s even between the vehicle and the obstacle, displays it...
Page 177 Parking assist Detection range of the sensor Alert If there are obstacles within the detection range, Target level the associated alarm indicator will light up and (Green) (Yellow) (Red) an audible alarm will sound. The interval of the Alarm area audible alarm sound is shortened when the Front/rear distance is getting closer;...
Page 178 Parking assist ● ● Front sensor* Alarm failure or false warning may occur The surfaces of some items cannot reflect when the sensor is icy or dirty in rain or the ultrasonic signals emitted by the When the vehicle speed is less than 15 km/h, the snow.
Page 179 Parking assist Reverse camera system* Use of reverse camera system Conditions affecting the rear-view effect of reversing When the vehicle is shifted into R gear, the rear Brief introduction of reverse camera system ● camera starts to work, and the multimedia In storm or fog.
Page 180 Parking assist ● AVM system * The vehicle drives into a garage with There are still a few blind zones in the AVM. heating system winter Brief introduction of AVM system Always observe the surroundings of the vehicle. temperature changes rapidly. The AVM system is a comfort system, which is ●...
Page 181 Parking assist ● In AVM, when touching the camera button Use of AVM system When the vehicle is not in "R" gear and the around the panorama, the single view area can vehicle speed is less than 25 km/h, press AVM switch be switched to the corresponding view image.
Page 182 Parking assist Switching operation of AVM system interface AVM settings Dynamic and static trajectories You have entered the AVM, please pay attention to the situation around the vehicle. Lane-tracking reversing assist Display of Trajectory obstacle line display Intelligent Moving Object turn-on Identification Transparent...
Page 183 Parking assist Dynamic tire track APA* This system is a parking assist system and Brief introduction of APA cannot completely replace the driver. In the process of using this function, the driver should The APA uses 4 AVM high-definition fisheye still pay attention to the surrounding environment cameras and 12 ultrasonic radar sensors around of the vehicle, control the speed of the vehicle,...
Page 184 Parking assist As the sensor cannot identify the presence External sound sources may interfere with The system may not recognize obstacles of potholes, do not use the system on large the system, causing the system sensor to not be with the following characteristics: correctly identified, and resulting in false alarm potholes to prevent vehicle collisions ●...
Page 185 Parking assist Before parking in place, make sure there are To ensure safety, when the parking function During automatic braking, the system may no obstacles (stones, cylinders, strings, trailer mode is used in the vehicle, the system will ask not be able to brake the moving obstacle in time, towing bar, etc.) in the parking space and around the driver to fasten the seat belt and confirm that such as pedestrians, electric vehicles, bicycle,...
Page 186 Parking assist Use of APA During APA, the following conditions shall cause In complex vehicle environments, such as the APA to exit: irregular parking surrounding vehicles, ● touch the exit button in the upper left corner skewed surrounding vehicles, surrounding The APA has been turned on, so please release the parking brake of the display.
Page 187 Locking after shutdown Locking after shutdo wn Turn off the engine When the engine is turned off, the vacuum Do not idle the engine for a long time to avoid Step on the brake pedal, stop the vehicle stably, booster does not work. It takes a lot of effort to oil leakage from the supercharger.
Page 188 Locking after shutdown Exterior locking 2. Place the keyless start/Stop button in "OFF" If you close the PEPS in the OBU, you need mode. Sensitive locking with smart key to turn it on again in the center control display, 3. Get off with the smart key (the smart key and if you temporarily close the PEPS through When the vehicle start/stop button is in "OFF"...
Page 189 Locking after shutdown The smart key button is locked Interior lock Equipped with exterior rearview mirror Central control locking electric folding function of the vehicle, after all doors are locked, the rearview mirror will fold The central locking button is located on automatically.
Page 190 Locking after shutdown After all the doors are locked, each door can still Automatic locking when driving Anti-theft system be opened separately inside the vehicle. When Armed state any door of the four doors is opened, the door cannot be locked by pressing the central door Exterior rearview Door Window...
Page 191 BAIC MOTOR ● franchised dealer for maintenance to avoid the Use the mobile phone APP to unlock the loss of property in the car due to the anti-theft vehicle and release the armed state.
Page 192 Locking after shutdown Exterior rearview mirror fold When the vehicle speed is higher than 20 km/h, the folded exterior rearview mirror will unfold Manually fold and open the exterior rearview automatically. mirror Pull the exterior rearview mirror backward at the If the exterior rearview mirror frame is side of the vehicle.
Page 193 Maintenance Mainten an ce Vehicle Cleaning When to clean the vehicle Manual cleaning Please wash the vehicle to protect the body When cleaning the vehicle, pay attention to the Exterior cleaning paintwork in the following cases: following points: Cleaning vehicle ●...
Page 194 In winter or spring, the anticorrosion Please clean the vehicle thoroughly before and sealing condition of the underbody must be checked. If necessary, please contact the BAIC waxing. MOTOR franchised dealer for repair. Clean Do not use waxes containing abrasives,...
Page 195 Maintenance Wheel: Internal cleaning If the footrest is not fixed, it may hinder the ● When cleaning the vehicle, you should Wipe the glass inside the vehicle. operation of the brake pedal and accelerator clean the inside of wheels. pedal and cause serious accidents. Do not use a knife-edged tool or chlorinated ●...
Page 196 When carrying maintenance driver can also go to the BAIC MOTOR ● Damage to top-coat or other protective inspection operations, it is necessary to observe franchised dealer.
Page 197 Do not disassemble the maintenance after the engine and exhaust fuel pipeline. Please go to the BAIC MOTOR system are cooled. franchised dealer to repair the fuel system.
Page 198 Maintenance Lamps: Daily maintenance project within the vehicle Check that whether all parts of the seat belt (such as buckle, tongue, and retractor) work Check and ensure that headlamp, brake lamp, Parking brake: properly and smoothly, and that whether they are position lamp, turn signal lamp and other lighting Operate the EPB switch to ensure that the securely mounted.
Page 199 If leakage or obvious gasoline smell is detected, loose, cracked or greased. not to cause partial discoloration of the interior. please find out the cause and contact the BAIC MOTOR franchised dealer...
Page 200 Maintenance Maintenance schedule First Regular Regular maintenance item Additional instructions (whichever comes first) maintenance maintenance It shall be replaced every 5,000 km/6 months under severe service ● ● Engine oil conditions. It shall be replaced every 5,000 km/6 months under severe service ●...
Page 201 Maintenance First Regular Regular maintenance item Additional instructions (whichever comes first) maintenance maintenance ○ ○ Idle speed of engine ○ ○ Engine coolant Replacement every 40,000 km/2 years Check whether the crankcase ventilation — — Check every 40,000km/2 years control system is normal. ○...
Page 202 Maintenance First Regular Regular maintenance item Additional instructions (whichever comes first) maintenance maintenance Computer detection: special ○ ○ diagnostic scan tool to read the fault memory in each control unit system. Check the instrument cluster display and ○ ○ interior and exterior lighting. ○...
Page 203 ● Maintenance specification In the cold season, the engine is idling for a Check and repair the vehicle at the BAIC long time or often runs for a short distance. The maintenance of this vehicle is divided into MOTOR franchised dealer in time if there is any maintenance under “general service condition"...
Page 204 Maintenance Replace and clean the wiper 1. Turn on the wiper for maintenance, and the 4. Gently toggle the locking clip of the wiper front wiper will arrive at the maintenance blade with your forefinger and hold it; Replace the front wiper blade position automatically;...
Page 205 Maintenance Replace the rear wiper plate After removing the wiper blade assembly, be 1. Lift the wiper arm away from the windshield, careful to prevent the wiper arm from rebounding with a thicker towel pad under the wiper arm and damaging the windshield. to prevent the wiper arm from accidentally rebounding and damaging the windshield;...
Page 206 Maintenance 2. Lift up the wiper arm to get it out of the Try to avoid the wiper blade drying the windshield; windshield, so as not to cause the rubber strip 3. Seize the wiper arm; aging and wear, which will affect the driving safety.
Page 207 If which will seriously affect the vision and lead to the spray pressure is too small or the spray accidents. position is incorrect, please go to the BAIC MOTOR franchised dealer for repair.
Page 208 If this happens, please go to the continuously for twice to unlock the hood. is supported reliably. BAIC MOTOR franchised dealer to check 2. Lift up the engine hood. Close the engine hood and adjust the positioning angle.
Page 209 Maintenance 3. Slowly lower the engine hood to a proper height and quickly press the engine hood to completely close it. 4. Check that the engine hood is closed properly. If the engine hood can also be lifted slightly, it means that it is not closed properly. Please open the engine hood again and apply a slight closing force as you close it again.
Page 210 5. Filler cap of brake fluid reservoir 6. Battery 7. Air cleaner 8. EJB Users are advised not to disassemble and assemble the engine compartment cover plate by themselves to avoid unnecessary injury. Please go to the BAIC MOTOR franchised dealer for disassembly and assembly.
Page 211 Please leave all the works to the If you have to work while the engine is functional failure of the vehicle. BAIC MOTOR franchised dealer. Improper starting or running, always be careful not to operation may result in injury.
Page 212 Refer to the maintenance schedule to change engine system is faulty. Shut down the engine the engine oil regularly. Please go to the BAIC immediately and check the engine oil level. MOTOR franchised dealer for replacement. Only...
Page 213 Maintenance 5. Pull out the oil dipstick again and check The engine consumes a certain amount of oil, whether the fluid level is between the upper and the oil consumption depends on the driving and lower limits. style and the vehicle use. Therefore, it is necessary to check the engine oil level regularly, preferably after each fuel refueling and before long-distance driving.
Page 214 Be sure to replace the engine oil regularly knowledge and the necessary special tools. according to the Maintenance schedule. Recycling by BAIC MOTOR franchised dealer is Be careful not to touch the radiator hose Please go to the BAIC MOTOR franchised recommended.
Page 215 If the fluid level drops significantly in a short time, contact the BAIC MOTOR franchised dealer for level is low. it indicates that the brake system leaks. Please maintaining brake system.
Page 216 Maintenance prevents the radiator from boiling and prevents Schedule. Please go to the BAIC MOTOR the forming of the scale and freezing etc. It can maintain the best operation condition of the franchised dealer for brake fluid replacement.
Page 217 If the coolant in the coolant tank is faded or the lamp assembly. discolored, the coolant shall be replaced in time. If the fog cannot dissipate for a long time, you can go to the BAIC MOTOR franchised dealer for inspection and repair.
Page 218 When some recommended to go to the BAIC MOTOR electrical system cannot work properly, it may be franchised dealer to replace the bulb. that the fuse has blown out. If this happens, replace the fuse.
Page 219 If there is still a fault, please contact BAIC MOTOR franchised dealer for maintenance. The EJB is located to the left of the engine The IPJB is located at the lower left side of the compartment.
Page 220 Maintenance Use the fuse puller on the fuse box cover to pull out the fuse. Normal fuse Blown fuse Pull out the fuse corresponding to the electrical equipment that has stopped working and check Check whether the wire in the fuse is blown. If it is blown (the fuse has been disconnected in the figure), replace it with a spare fuse with the same or lower amperage.
Page 221 Maintenance Assignment of fuse location Location of positive fuse box It is strictly forbidden to use other items to replace the fuse, so as not to damage the vehicle; otherwise, it may even cause fire or casualties. The use of inappropriate fuse may cause fire or injury.
Page 222 Maintenance Location of EJB It is strictly forbidden to use other items to replace the fuse, so as not to damage the vehicle; otherwise, it may even cause fire or casualties. The use of inappropriate fuse may cause fire or injury. The fuse may be slightly different depending on the vehicle models, and please check the real vehicle.
Page 223 Maintenance Specification Protection circuit Specification Protection circuit Specification function engine compartment fuse EF23 Brake switch High-speed wiper ERY09 relay Specification Protection circuit EF24 Rear wiper Vacuum pump EF01 Reserved EF27 ERY10 relay EF02 Starting supply EF28 Oil pump ERY12 Oil pump relay EF03 EF31 Reserved...
Page 224 Maintenance Location diagram of IPJB It is strictly forbidden to use other items to replace the fuse, so as not to damage the vehicle; otherwise, it may even cause fire or casualties. The use of inappropriate fuse may cause fire or injury.
Page 225 Maintenance Specification Protection circuit Specification Protection circuit Specification and function of instrument panel fuse Instrument cluster, AI voice interactive RF10 electronic shifter light, wireless Specification Protection circuit charging*, ambient Driver's electric RF23 RF01 Driver's electric seat RF11 light*, front seat* RF02 Upstream fuse 1 passenger touch...
Page 226 Maintenance Specification Protection circuit Specification Protection circuit Clock spring, RF47 Reserved TBOX*, APA*, 12 V power supply RF48 RF36 UPA*, head unit*, (front) infotainment RF49～ domain control unit* Reserved A/C control unit, AI RRY-01 Reserved voice interactive RF37 light, rearview RRY-02 Reserved mirror anti-glare*,...
Page 227 The child must be kept ingested by mistake, seek medical attention manner. Send the exhausted away from electrolyte immediately. battery to the BAIC MOTOR and vehicle battery! franchised dealer The battery electrolyte Before operating the battery, you should...
Page 228 BAIC battery is undercharged, the battery electrolyte MOTOR franchised dealer to check the battery will be frozen and damage the battery.
Page 229 ● If you find it is difficult to start the vehicle, replacement. recommended to replace the battery at the BAIC you should timely go to the BAIC MOTOR MOTOR franchised dealer. Tire damage is not easy to be found, if the...
Page 230 BAIC MOTOR franchised dealer. accidents. when driving and cause a traffic accident.
Page 231 Maintenance ● If a rear tire bursts, the vehicle may have Tread wear mark Using out-of-spec rim can also cause abnormal vibration and noise during driving, problems in bearing life, brake cooling, odometer but the steering can still be controlled. At odometer calibration, vehicle...
Page 232 110±10 N· m. Adjust the tire The tire of the same brand, specification, model, BAIC MOTOR franchised dealer. pressure of all wheel to the specified value. After size, pattern and newness must be used on the the vehicle travels 1000 km, recheck the wheel same axle.
Page 233 Maintenance Check and adjust the tire pressure Add some household washer fluid to the After the vehicle has been driven for a while, Tire information sign valve and observe whether there are bubbles. If the tire pressure should rise by 0.2 to 0.5 bar. On the left C-pillar, there is a data sign about tire bubbles appear, it indicates that there is air Check the tire pressure at this time.
Page 234 Maintenance Check the tire pressure at least once a month. If the vehicle is not used for a long time and the When there is a new version of the software to Check the tire pressure (including the spare battery is not charged, the battery will fail due to upgrade, center control...
Page 235 Automatic download Light Vehicle vehicle automatic will be powered off. sound effect Automatic Vehicle sound download If the update is abnormal, please contact BAIC effect Driving International Development Co., Ltd. Service Driving Driver assistance Hotline: Driver assistance Instrument cluster...
Page 236 It indicates that the GPF is faulty. above operation will affect the normal operation period). In this case, please contact the BAIC MOTOR of the engine and GPF, and may cause damage ● Try to drive at a constant speed on the road franchised dealer to inspect and repair the GPF to the vehicle components.
Page 237 Consult the BAIC MOTOR franchised dealer. It is not to affect the heat dissipation. recommended that you always use accessories and parts approved by the company.
Page 238 To facilitate Scrapped or damaged parts recycling, the range of materials used has been It cannot be thrown at will, and the BAIC MOTOR limited: most plastics are thermoplastics that can franchised dealer...
Page 239 Emergency treatment Em erg ency tr eatment Emergency rescue Hazard warning lamp The hazard warning lamp should be turned on in case of any of the following: Emergency call for help * ● When the vehicle breaks down due to technical failure.
Page 240 Emergency treatment Driver's tools Improper use of jack assembly may cause serious injury. ● The jack assembly is specially designed for the emergency to replace the wheel, and cannot be used to support the vehicle for a long time, and only one wheel can be lifted at a time.
Page 241 Emergency treatment Reflective vest Warning triangle The glove box is equipped with reflective vests Pull out the two hems of the warning triangle The warning triangle is fixed under the floor mat for the driver and crew when handling vehicle during use of the trunk.
Page 242 Emergency treatment Emergency opening of trunk 1. Fold the rear seats into the inside of the 2. Toggle the emergency opening switch of the Road type General Expressway trunk, and at the middle of the lower part of trunk to unlock the trunk, and push the trunk highway the trunk lid , pull down and remove the trunk lid outward to unlock it.
Page 243 Emergency treatment 3. Connect the other end ② to the positive (+) Jump start Do not charge the frozen battery, as there is of the power supply battery "B"; If the vehicle engine cannot be started due to a risk of explosion! Even thawed battery, during excessive discharge of the battery, the battery of 4.
Page 244 Emergency treatment ● Do not connect the negative jumper cable to Replace with the spare wheel any part of the fuel system or pipeline, as Spare wheel there is a risk of fire. ● Do not bend close to the battery during operation to avoid being burned by the acid.
Page 245 Emergency treatment ● Replace with the spare wheel Do not leave anyone in the vehicle. If a tire is found to be burst, punctured, bulge or Remove the faulty wheel leakage, drive slowly to a flat and safety place to replace with the spare wheel to avoid further damage to the tire and rim.
Page 246 Emergency treatment 3. Rotate the jack rocker so that the notch of the 5. Remove the wheel nut cover with the wheel And make sure the jack assembly lifts the jack head is stuck at the body support point, nut cover remover; vehicle upright.
Page 247 Emergency treatment Do not jack up the vehicle out of specified The spare wheel is only used in emergency. support points. Install the spare wheel and drive carefully. The vehicle speed is prohibited to be higher than 80 Do not put any shim on or under the jack km/h.
Page 248 Control the vehicle speed reasonably during driving to avoid abrupt acceleration and emergency braking. Go to the BAIC MOTOR franchised dealer as soon as possible to check and ensure the wheel nut reaches the specified torque. During replacement of the wheel, if the nut is found to be rusty or difficult to be screwed, the 2.
Page 249 ● parties with specialized equipment (such as law Longitudinal acceleration: The acceleration 2. Contact the BAIC MOTOR franchised dealer enforcement) can read the relevant information in which the vehicle is moving forward when and wait for rescue if personal safety is when the vehicle or EDR is authorized to be a collision occurs.
Page 250 Towing method Towing from the front. Use of flatbed rescue truck Towing hint It is recommended to contact a BAIC MOTOR franchised dealer or a professional vehicle roadway rescue company for rescue. When contacting them, inform them of the transmission...
Page 251 If the towed vehicle is difficult to move, do not Inexperienced drivers shall not try to tow continue to forcibly tow it, and contact the BAIC other vehicles to prevent accidents. MOTOR franchised dealer.
Page 252 Emergency treatment Mounting towing eye Avoid excessive towing or violent towing, and Front towing eye of vehicle ensure that the towing rope is always in tension; in case of towing in uneven road, the traction 1. Take out the wheel removal and refitting connections will overloaded...
Page 253 Emergency treatment Rear towing eye of vehicle 1. Take out the wheel removal and refitting wrench and removable towing eye from the tool kit in the trunk; 4. Tighten the towing eye firmly with the wheel 3. Screw the towing eye clockwise into the removal and refitting wrench.
Page 254 Emergency treatment Trailer reminder Trailer reminder Trailer reminder Sensor sensitivity High Medi Towing reminder distance 1 km 200 m 500 m 2 km 4. Tighten the towing eye firmly with the wheel removal and refitting wrench. Through the center control display, you can turn on/off the towing reminder function, set the sensor sensitivity (high, medium, low), and set the towing reminder distance (200 m, 500 m, 1...
Page 255 Technical parameters Tech nical paramet er s Vehicle identification Identification number The VIN is the unique identification number of the vehicle. It is pasted on the front and back of Trunk lid (VIN) Microwave Hood (VIN) the vehicle, as shown in the figure (only part of window the VIN on the vehicle is shown in the figure).
Page 256 The VIN can be read out on the DLC using 6. Seating capacity and manufacture time. an external diagnostic scan tool. Purchase channel and contact information: BAIC International Development Co., Ltd. Diagnostic scan tool system at this stage: PAD diagnostic scan tool kit.
Page 257 Technical parameters Engine and transmission The engine model and factory number ① are located on the engine housing near the starter. The automatic transmission model ② is located on the transmission housing. Engine model and factory number ③ label, Engine model and factory number Model of automatic and paste it on the engine trim cover.
Page 258 Technical parameters Safety label The location of the relevant safety label is shown in the figure: Safety airbag warning label ● The safety airbag warning label is located on the front and back of the front passenger sun visor. ● The A/C filler fluid and fan warning labels are located on the right side of the engine compartment front upper cross member trim...
Page 259 Technical parameters Technical parameters of vehicle (Unit: mm) Note: vehicle exterior rearview mirror ① is not included in the outer outline dimension...
Page 260 Technical parameters Vehicle model BJ6460U5XDK Vehicle length (mm) 4620 Vehicle width (mm) (excluding rearview mirror) 1886 Vehicle height (mm) (no load) 1680 (including luggage rack/shark fin antenna) Wheelbase (mm) 2735 Front wheel track (mm) 1615 Rear wheel track (mm) 1625 Front suspension (mm) Rear suspension (mm) Driving mode...
Page 261 Technical parameters Vehicle model BJ6460U5XDK -16′±30′ (difference between left and right sides shall not exceed 30′) Front wheel Wheel camber -63′±30′ (difference between left and right sides shall not exceed 30′) Rear wheel Kingpin Front wheel 13° 53'±30' (difference between left and right sides shall not exceed 1° 30') Wheel inclination alignment...
Page 262 Technical parameters Vehicle model BJ6460U5XDK Specification of tire 225/55R19 225/60R18 Driving wheel Rim specification 7.0J×19 6.5J×18 Tire pressure 220kPa Wheel Specification of tire T135/90R17 Spare wheel Rim specification 17x4T Tire pressure 420kPa Standard dimensions Thickness of front brake disc (mm) Wear limit Standard dimensions Thickness of front brake...
Page 263 Technical parameters Specification and capacity of oil/fluid Oil/fluid name Specification Vehicle filling volume SP/C50 W/20, oil ash weight ratio ≤0.8% 4.7 L (maintenance refill volume) Automatic transmission CNPC Kunlun DCTF-7S 4.95～5.05L lubricating oil Total organic coolant (freezing point ≤ -40 ° C) Coolant 6.98～7.02L Water-based low temperature windshield cleaning fluid...

Save PDF