�K = PS� same platform next time, you can proceed directly to Step �. Step �. Connect the Brook Fighter Starburst to your console or PC. Step �. Follow the on-screen instructions to press the specified button and log into the game.
RGB LED Function Setting • Fn + □(1P): Switch lighting e ects. E ect sequence: All o (default) → Turn on when pressed → Turn on when pressed → Breathing light → Marquee (left to right) → Marquee(right to left) •...
Page 6
SOCD Mode Switching Tutorial Simultaneous Opposing Cardinal Directions. 1. Default setting is mode 1 2. SOCD will be automatically saved Switch method Please hold down the corresponding button first, then insert the power cable into the console to switch modes. Mode 4 Mode 3 Mode 1...
Page 7
Use combination keys to set stick control mode OPTIONS START Press and hold Options and ↑(Up) for three seconds OPTIONS START Press and hold Options and ← (Left) for three seconds. OPTIONS START Press and hold Options and → (Right) for three seconds.
Page 8
Touchpad Emulate Touch Pad Key Press the left button while holding the TP Key Touch Pad Key Press Touch Pad Key Touch Pad Key Press the right button while holding the TP Key...
Page 9
Magnetic Leather Case Instructions Angle � Fully unfold the case and lay it flat. Fold the case in the opposite direction. Refer to the diagram. Fold the bottom Once magnetically secured, of the case backward and align it with Angle � is set. the second grid at the product's base.
Page 10
Lock Function Setting • Hold down Fn + Share + Option to enable or disable the lock status. • Once the lock status is enabled, the following keys will no longer function: PS Key, Option, Share.
Need help?
Do you have a question about the Fighter Starburst and is the answer not in the manual?
Questions and answers