Advertisement
Quick Links
AUTO OFF
The scale will auto off a few seconds
after weighing.
ABOUT BMI
The Body Mass Index(BMI) is calculated from a person's weight and
height, and is a widely accepted measurement of weight. A BMI of 20
~25 is considered to be ideal. Lower than 20 is too slim, and higher
than 25 is considered over weight. (BMI is only for reference)
ADVISE FOR USE & CARE
1.The glass platform will be slippery when it is wet. Keep it dry!
Keep the scale in cool place with dry air.
2.Keep standing still during the course of weighing. DO NOT strike,
shock or drop the scale.
3.Treat the scale with care as it is a precise instrument. Always keep
your scale in horizontal position.
4.Clean the scale with a damp cloth and avoid water getting inside
the scale. DO NOT use chemical/abrasive cleaning agents.
5.If failed to turn on the scale, check whether battery is installed, or
battery power is low. Insert or replace new battery.
6.If there is error on display or can not turn off the scale for a long
time, please take off the battery for about 3 seconds, then install it
again to remove soft-fault. If you can not resolve the problem, please
contact your dealer for consultation.
7.Do not use it for commercial purpose.
Electronic Personal Scale
14EB-026E R0
Instructions for use
ISO 9001 CERTIFIED BY SGS
EB-26 SERIES
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for camry EB-26 Series
Summary of Contents for camry EB-26 Series
- Page 1 3 seconds, then install it again to remove soft-fault. If you can not resolve the problem, please contact your dealer for consultation. 7.Do not use it for commercial purpose. ISO 9001 CERTIFIED BY SGS EB-26 SERIES 14EB-026E R0...
- Page 2 BATTERY LCD DISPLAY The battery type of scale is one of the following: Weight unit a. 1x3V CR2032 lithium batteries. Remove isolation sheet before use; Height unit b. 2x1.5V (AAA(batteries. Remove package foil before use; BMI level indication User code BMI icon TO REPLACE BATTERY Gender icon...
- Page 3 BMI MODE WEIGHING i: Auto step on weighing: Add on weighing object(>3kg) to turn on the scale, Parameter can be set in the following range: it then starts to weigh and shows the total weight. The LCD flashes three gender user code times after stabilizes, and search saved users' data automatically.
- Page 4 2)BMI guest mode(data will not be saved) To set user parameters: Press GUEST button to turn on the scale and press▲button step on or▼ button enter GUEST mode, the LCD shows "GUS". Setting gender and height, the scale press set again to confirm. When finish setting, press the scale gently to start weighing.
Need help?
Do you have a question about the EB-26 Series and is the answer not in the manual?
Questions and answers