camry EK-19A SERIES Instructions For Use

Download this manual

FRIENDLY REMINDER

When pouring liquid from the measuring cup, please remove the measuring

cup from scale body. If scale body has to be held when pouring the liquid,

please press the edge of the measuring cup with your thumb to avoid the

prolapse. Please see the diagram.

√

CLEANING AND CARE

1.Clean the product with a soft, slightly damp (not wet) cloth. Remove

container to clean up. Ensure container is empty before removing; Do

not put scale into water. The scale is not water-proof.

2. All plastic parts should be cleaned immediately after contact with fats,

spices, vinegar and strongly flavored/colored foods. Avoid contact with

acids citrus juices.

3. Always use the scale on a hard, flat surface. DO NOT use on carpet.

4 DO NOT strike, shake or drop the scale.

5 The scale is precise instrument. Please treat with care.

6 Put the scale in cool and dry place.

7 If fail to switch on the scale, check whether battery is installed, or

battery power is low.

8 For family use only. DO NOT use for commercial purpose.

13EK-019E R2

MEASURING

CUP SCALES

INSTRUCTIONS FOR USE

ISO 9001:2008 CERTIFIED BY SGS

EK-19A SERIES

Page 1: Instructions For Use
6 Put the scale in cool and dry place. 7 If fail to switch on the scale, check whether battery is installed, or battery power is low. 8 For family use only. DO NOT use for commercial purpose. ISO 9001:2008 CERTIFIED BY SGS EK-19A SERIES 13EK-019E R2...
Page 2 FEATURES FUNCTION BUTTON 1.Measuring cup function 2.Indicate volume of water,milk,oil and flour MODE UNIT ON/OFF ON/OFF 3.Two weight units convertible: g, lb:oz ZERO ZERO 4.Three volume units convertible: ml, fl'oz, cup Mode MODE 5.Tare,Zero function conversion 6.Low battery power/Overload indication ON/OFF UNIT Unit conversion...
Page 3: Weighing Mode
UNIT CONVERSION 2. Volume mode If the scale is with both measuring systems of Metric (kg, g) and Imperial (lb, oz)： 1. Weight unit conversion: For instance, measuring milk by CUP Press UNIT button to convert weight unit between Metric and Imperial system after entering unit as following steps: weighing mode.
Page 4 AUTO SHUT OFF "ZERO" OR "TARE" FUNCTION Auto shut-off occurs if no operation To weigh different loads consecutively without removing loads from the scale. or shows the same weight reading ON/OFF Put first Load on the scale, get weight reading. Press button to reset the ZERO for 30 seconds.