Advertisement

Quick Links

EN User Manual | Dishwasher
KESC7415L

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KESC7415L and is the answer not in the manual?

Questions and answers

Summary of Contents for Electrolux KESC7415L

  • Page 1 EN User Manual | Dishwasher KESC7415L...
  • Page 2: Table Of Contents

    Welcome to Electrolux! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.electrolux.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. INSTALLATION....................5 4. PRODUCT DESCRIPTION................7 5.
  • Page 3: General Safety

    • Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. • Children should be supervised to ensure that they do not play with the appliance. • Keep detergents away from children. •...
  • Page 4: Safety Instructions

    • If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.
  • Page 5: Installation

    parts related to door assemblies, printed WARNING! circuit boards, electronic displays, pressure switches, thermostats and Dangerous voltage. sensors, software and firmware including reset software. The following spare parts 2.4 Use are available for at least 10 years after the • Do not put flammable products or items model has been discontinued: door hinge that are wet with flammable products in, and seals, other seals, spray arms, drain...
  • Page 6 Authorized Service Centre to replace it with the new one. www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury.
  • Page 7: Product Description

    4. PRODUCT DESCRIPTION Upper spray arm • When the programme starts, a red light comes on and stays on for the duration of Lower spray arm the programme. Filters • When the programme is completed, a Rating plate green light comes on. •...
  • Page 8: Control Panel

    5. CONTROL PANEL On/Off button/Reset button A. Indicators B. Time indicator Delay start button Display Programme buttons Option buttons AUTO Sense programme button 5.1 Display 5.2 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before first use".
  • Page 9: Programme Selection

    6. PROGRAMME SELECTION 6.1 Programmes consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes. 6.2 AUTO Sense This programme automatically adjusts the dishwashing cycle to the type of load. The appliance senses the degree of soil and the amount of dishes in the baskets.
  • Page 10: Consumption Values

    Programme Dishwasher Degree of soil Programme phases Options load 60min Crockery, cutlery Fresh, lightly • Dishwashing 60 °C • ExtraPower dried-on • Intermediate rinse • GlassCare • Final rinse 50 °C • AirDry 90min Crockery, cutlery, Normal, lightly • Dishwashing 60 °C •...
  • Page 11: Basic Settings

    Water (l) Energy (kWh) Duration (min) Programme 1)2) 90min 10.1 1.027 160min 10.2 0.982 0.735 AUTO Sense 10.2 0.982 Machine Care 0.645 The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
  • Page 12: Setting Mode

    7.1 Setting mode 5. Press and hold simultaneously 30min and ECO for about 3 seconds to exit setting mode. How to enter setting mode The appliance returns to the programme selection. You can enter setting mode before starting a The saved settings remain valid until you programme.
  • Page 13 you on the hardness of the water in your area. Set the right level of the water softener to assure good washing results. Water hardness German de‐ French de‐ mmol/l mg/l (ppm) Clarke de‐ Water softener grees (°dH) grees (°fH) grees level 47 - 50...
  • Page 14: The Rinse Aid Empty Notification

    7.7 AirDry same cycle or at the beginning of the next programme. This activity increases the total AirDry improves the drying results. The water consumption of a programme by appliance door opens automatically during additional 4 litres and the total energy the drying phase and remains ajar.
  • Page 15: Before First Use

    8. BEFORE FIRST USE 1. Adjust the level of the water softener according to the hardness of the water supply. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start 30min programme to remove any residuals from the manufacturing process.
  • Page 16: Daily Use

    3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. You can turn the selector of the released 4. Close the lid. Make sure that the release quantity (B) between position 1 (lowest button locks into position. quantity) and position 4 or 6 (highest quantity).
  • Page 17: How To Delay The Start Of A Programme

    9.4 How to activate options During the countdown, it is not possible to change the delay time and the programme 1. Select a programme. selection. 2. Press the button dedicated to the option When the countdown is complete, the you want to activate. programme starts.
  • Page 18: End Of The Programme

    • When the programme is completed. The Auto Off function switches the appliance • After 5 minutes if a programme was not off automatically. started. All buttons are inactive except for the on/off button. 9.11 End of the programme When the programme is complete, the display shows 0:00.
  • Page 19: What To Do If You Want To Stop Using Multi-Tablets

    10.3 What to do if you want to stop • Use the appliance to wash dishwasher- using multi-tablets safe items only. • Do not wash the following materials in the Before you start using separately detergent, dishwasher: wood, horn, pewter, copper, salt and rinse aid, complete the following aluminium, delicate ornamented porcelain steps:...
  • Page 20: How To Start The Machine Care Programme

    results. It removes limescale and grease pieces of glass, plastic, bones or toothpicks, buildup. etc) decrease the cleaning performance and can cause damage to the drain pump. When the appliance senses the need for cleaning, the indicator is on. Start the CAUTION! Machine Care programme to clean the If unable to remove the foreign objects,...
  • Page 21: Cleaning The Lower Spray Arm

    2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage...
  • Page 22: Troubleshooting

    3. To install the spray arm back, press it downwards. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. 11.7 Cleaning the upper spray arm Do not remove the upper spray arm.
  • Page 23 Problem and alarm code Possible cause and solution The programme does not start. • Make sure that the appliance door is closed. • If the delay start is set, cancel the setting or wait for the end of the countdown. •...
  • Page 24 Problem and alarm code Possible cause and solution The remaining time in the display in‐ • This is not a defect. The appliance is working correctly. creases and skips nearly to the end of the programme duration. Small leak from the appliance door. •...
  • Page 25 12.2 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaf‐ let. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.
  • Page 26: Technical Information

    Problem Possible cause and solution Limescale deposits on the tableware, • The level of salt is low, check the refill indicator. on the tub and on the inside of the • The cap of the salt container is loose. door. •...
  • Page 27: Environmental Concerns

    rating plate of the appliance. Refer to the For more detailed information about the chapter "Product description". energy label, visit www.theenergylabel.eu. 14. ENVIRONMENTAL CONCERNS appliances marked with the symbol with Recycle materials with the symbol . Put the the household waste. Return the product to packaging in relevant containers to recycle it.
  • Page 28 156827340-A-132024...

Table of Contents