Sounder Strobe is a kind of optical and visual alarm device used to warn people in field when fire occurs. C-9401N conventional sounder strobe can give optical and visual alarm when powered by DC24V, and can be connected to fire alarm control panel through an addressable linkage control module.
The base box and cover of the sounder strobe are plugged together, surfaced mounted on 85H50 embedded box as shown in Fig. 2. Fig. 2 Mounting The base box of C-9401N is shown in Fig. 3, please note direction when installing. Page 2...
If a sounder strobe fails in testing, check its connection and test again. If it still fails, return for repair. VII Applications C-9401N: sounder strobe connects DC24V power in direct startup; V+ is positive and V- is negative which are reverse when not started up. VIII Product warnings and disclaimers THESE PRODUCTS ARE INTENDED FOR SALE TO, AND INSTALLATION BY, AN EXPERIENCED SECURITY PROFESSIONAL.
Page 6
PRODUCTS, INCLUDING ANY “AUTHORIZED DEALER”, IS PROPERLY TRAINED OR EXPERIENCED TO CORRECTLY INSTALL SECURITY RELATED PRODUCTS. For more information on warranty disclaimers and product safety information, please check https://firesecurityproducts.com/policy/product-warning/ or scan the following code: Page 4...
Page 7
Gulf Security Technology Co., Ltd. No. 80, Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004 Tel: +86 (0) 335 8502434 Fax: +86 (0) 335 8502532 service.gst@carrier.com www.gst.com.cn 30312587...
Need help?
Do you have a question about the C-9401N and is the answer not in the manual?
Questions and answers