GST I-9401N Installation And Operation Manual
GST I-9401N Installation And Operation Manual

GST I-9401N Installation And Operation Manual

Addressable sounder strobe

Advertisement

Quick Links

I–9401N Addressable Sounder Strobe
Installation and Operation Manual
(Issue 1.02, December
2020)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the I-9401N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GST I-9401N

  • Page 1 I–9401N Addressable Sounder Strobe Installation and Operation Manual (Issue 1.02, December 2020)
  • Page 2: Table Of Contents

    I-9401N Addressable Sounder Strobe Installation and Operation Manual CONTENTS General ........................ 1 Features ....................... 1 Technical Specifications ..................1 Structure and Operation Principle................ 2 Mounting and Wiring .................... 2 Testing ........................3 Applications ......................4 VIII Product warnings and disclaimers ............... 4...
  • Page 3: I General

    Sounder Strobe is a kind of optical and visual alarm device used to warn people in field when fire occurs. I-9401N addressable sounder strobe can be started directly by fire alarm control panel. It can be electronically programmed and modified by P-9910 Hand Held Programmer in field.
  • Page 4: Structure And Operation Principle

    10. IP Rating: IP43 11. Material and Color of Enclosure: ABS/ ivory white, front inlaid with plexiglass/red 12. Weight:I-9401N:about 255g(with base) 13. Hole Distance: 65mm IV Structure and Operation Principle Structure of the sounder strobe is shown in Fig. 1.
  • Page 5: Testing

    Fig. 2 Mounting The base box of I-9401N is shown in Fig. 3, please note direction when installing. Fig. 3 I-9401N Base box Terminals: D1, D2: Connecting DC24V power, non-polarized; Z1, Z2: Connecting signal loop of the control panel, non-polarized;...
  • Page 6: Applications

    put into operation. Before testing, notify the proper authorities that the system is undergoing maintenance and will temporarily be out of service. Disable the zone or system undergoing maintenance to avoid unwanted alarms. Testing: Providing close signal to the outer control contact by manual call point, the sounder strobe is activated and gives audio and visual alarm;...
  • Page 7 TRAINED OR EXPERIENCED TO CORRECTLY INSTALL FIRE AND SECURITY RELATED PRODUCTS. For more information on warranty disclaimers and product safety information, please check https://firesecurityproducts.com/policy/product-warning/ or scan the following code: Page 5...
  • Page 8 Gulf Security Technology Co., Ltd. No. 80, Changjiang East Road, ETDZ, Qinhuangdao, Hebei, P. R. China 066004 Tel: +86 (0) 335 8502434 service.gst@carrier.com www.gst.com.cn 30312588...

Table of Contents