Contents ● Page 3 - How it Works ● Page 4 - Turning On/Off and Programming ● Page 5 - Mode/Options ● Page 6 - Registering to a Notifier / Other System Page 7 - Installation ● Smart Technology, Made to Care...
The Cair Contact is an innovative, versatile door and window sensor that can eradicate the need for a full property exit solution. The Contact has many different modes, which are all easily programmable using the buttons on the device. The device has the following features built-in, allowing you to provide the right personalised solution every time.
Press and release the large button to confirm the chosen mode/option. ● ● The LED will flash to confirm the mode/option you have selected. To register the device, aligning the Contact and magnet and then separate. ● Smart Technology, Made to Care...
Page 5
Contact Modes/Options Mode 1: Door open mode (default) ● ● Mode 2: Door open/closed mode (virtual) Mode 3: Door open and 45 seconds ‘still open mode’ ● ● Mode 4: Door open and 2 minutes ‘still open mode’ ● Mode 5: Door left open, 2 minutes mode ●...
Program the Contact to the desired mode. ● ● Prepare the Notifier/other system by entering registration mode. Activate the Contact by aligning the Contact and magnet and then separating from ● each other. The Notifier/other system should acknowledge the new device. ●...
The Contact can be fitted to the door frame with the Magnet onto the door, or vice versa. The Contact has a built-in Reed Switch on its side, the centre of which is indicated by a notch on the device.
Need help?
Do you have a question about the Contact and is the answer not in the manual?
Questions and answers