Advertisement
Quick Links
Advertisement
Related Manuals for Cair Contact
Summary of Contents for Cair Contact
- Page 1 Contact The Cair Contact is an intelligent door and window sensor.
- Page 2 Contact and Magnet can be secured into place using screws (Screw Mount Version), or using adhesive pads (Adhesive Mount Version). The Contact can be fitted to the door frame with the Magnet onto the door, or vice versa. The Contact has a built-in Reed Switch on its side, the centre of which is indicated by a notch on the device.
- Page 3 7. Installer Test Feature. This feature is designed to help installers decide where to position the Contact and Magnet. The LED will illuminate green if the Contact detects the Magnet and red if the Magnet is too far away. This feature can be enabled by following the programming instructions above and pressing the small button 7 times.
- Page 4 Do not dismantle or alter the unit. Do not open the case, unless The battery can be accessed by unscrewing the six screws on replacing battery. the rear of the Contact. One CR2450 Coin Cell battery should be Disposal used to ensure maximum battery life. It is important that the battery is inserted correctly.
Need help?
Do you have a question about the Contact and is the answer not in the manual?
Questions and answers