Related Manuals for Telstra Business Smart Modem
Summary of Contents for Telstra Business Smart Modem
- Page 1 Get started on the nbn. An easy guide for connecting your Telstra Business Service. Suitable for connection type: Fibre to the Curb (FTTC)
-
Page 2: Need Support
Need Support? Visit telstra.com.au/small-business/online-support/category/broadband/nbn for extra information. -
Page 3: Table Of Contents
Contents Do you have any of the following? Unplug all devices from your phone sockets Parts you will need Setup steps Wi-Fi setup Troubleshooting FAQs... -
Page 4: Do You Have Any Of The Following
Do you have any of the following? If not, please continue to page 6. - Page 5 Monitored ATM or EFTPOS Back-to-Base IF YES, STOP! Fire Alarm Security Alarm Contact your equipment provider(s) to check that services you rely on, like medical, fire and other equipment will work on the nbn network. Additional information is on page 17. FAX or PBX Emergency Medical...
-
Page 6: Unplug All Devices From Your Phone Sockets
Unplug all devices from your phone sockets. Make sure you’ve disconnected all devices such as telephones, modems, ADSL filters, EFTPOS and FAX machines from your telephone wall sockets. After you’ve switched to the nbn, these sockets will no longer work. -
Page 8: Parts You Will Need
Parts you will need. - Page 9 Telstra Business Modem Connection Box ™ Optional Cable Connect your phone. Telstra Business Black power Connection Box Black power ™ Smart Modem adaptor adaptor ™ Telephone cable with grey ends. Netw ork Name Of ce Wi-Fi 1 Netw ork Name...
-
Page 10: Setup Steps
Setup steps. Follow steps 1 - 7 to get connected. On first use, your Telstra Business Smart Modem may take up to 15 minutes to connect. Got an older-style telephone wall socket? You’ll need to purchase an adaptor. These can be found at most hardware or electronics stores. - Page 11 Once connected, the lights will show solid blue on the front of modem. The LM1200 may be powered directly from the USB port of the Telstra Business Smart Modem or the supplied power adaptor. Optional Cable. Yellow ethernet...
-
Page 12: Wi-Fi Setup
Wi-Fi setup. - Page 13 Search for Wi-Fi name and enter password shown on Wi-Fi card. Wi -Fi 1 Repeat steps Wi -Fi 2 to connect your Wi -Fi 3 other devices via Wi-Fi. Ne two rk Na me Of ce W- Fi 1 Ne two rk Na me Of ce W- Fi 2 Change your Wi-Fi network and password.
-
Page 14: Troubleshooting
Troubleshooting. - Page 15 Make sure your Netgear LTE Modem LM1200 is connected to red You’re ready to make LAN port and also to power via power adapter or USB port on Telstra and receive calls on Business Smart Modem. This ensures your internet can keep working the nbn network even in the event of a fault with your nbn connection.
-
Page 16: Faqs
FAQs. - Page 17 ® are registered trade marks and ™ are trade marks of Telstra Corporation Limited, ABN 33 051 775 556. is a trademark of nbn co limited and is used under licence.
- Page 18 Suitable for connection type: Fibre to the Curb (FTTC) RO# 100253734...
Need help?
Do you have a question about the Business Smart Modem and is the answer not in the manual?
Questions and answers